loading
ASTM F2700-26 - Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame-Resistant Materials for Clothing with Continuous Heating
May 1, 2026 - ASTM International

5.1 This test method is intended for the determination of the heat transfer performance value of a material, a combination of materials, or a comparison of different materials used in flame-resistant clothing for workers exposed to combined convective and radiant thermal hazards. 5.2 This...

ASTM F2703-26 - Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame-Resistant Materials for Clothing with Burn Injury Prediction
May 1, 2026 - ASTM International

1.1 This test method measures the non-steady state heat transfer through flame-resistant materials for clothing subjected to a combined convective and radiant heat exposure. 1.1.1 This test method is not applicable to materials that are not flame resistant. Note 1: The determination of a...

ASTM D5548-26 - Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering (Not Suitable for Detergent or Washing Machine Rankings)
April 1, 2026 - ASTM International

This guide covers the evaluation of the effect of dyestuff color transfer or color loss from dyed fabrics. It is designed as a laboratory screening test to aid in the formulation of detergent products or the comparison of two or more detergents, it is not suitable for detergent or washing...

ASTM F1939-26 - Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating
June 15, 2026 - ASTM International

5.1 This test method is intended for the determination of the radiant heat resistance value of a material, a combination of materials, or a comparison of different materials used in flame-resistant clothing for workers exposed to radiant thermal hazards. 5.2 This test method evaluates a material's...

ASTM F433-02(2026) - Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
June 1, 2026 - ASTM International

5.1 This practice is designed to compare related materials under controlled conditions and their ability to maintain a minimum amount of thermal conductance. Test results should be correlated with field results in order to predict heat transfer properties in particular applications. 5.2 This...

ASTM D1601-18(2026) - Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers
July 1, 2026 - ASTM International

4.1 The knowledge of dilute solution viscosity serves as an additional tool in characterizing ethylene polymers. Viscosity data alone is potentially a limited value in predicting the processing behavior of the polymer. However, when used in conjunction with other flow and physical property values,...

ASTM E834-21(2026) - Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
July 1, 2026 - ASTM International

5.1 When applied in the case in which there is no test item in the vacuum chamber (such as during bake-out operations), this procedure may be used to evaluate the performance of the vacuum chamber in relation to other data from the same or other chambers given that critical parameters (for example,...

ASTM D7524-26 - Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method
May 1, 2026 - ASTM International

5.1 This test method will allow the determination of static dissipater additive in jet and middle distillate. These additives reduce the hazardous effects of static electricity generated by transfer and movement of jet and middle distillate fuels.

ASTM E800-26 - Standard Guide for Measurement of Gases Present or Generated During Fires
June 1, 2026 - ASTM International

4.1 Because of the loss of life in fires from inhalation of fire gases, much attention has been focused on the analyses of these species. Analysis has involved several new or modified methods, since common analytical techniques have often proven to be inappropriate for the combinations of various...

ASTM D5262-21(2026) - Standard Test Method for Determining the Unconfined Tension Creep and Creep Rupture Behavior of Planar Geosynthetics Used for Reinforcement Purposes
June 1, 2026 - ASTM International

5.1 This test method is developed for use in the determination of anticipated total elongation over time or time to rupture that may occur in geosynthetics under sustained loading conditions. 5.1.1 The test data can be used in conjunction with interpretive methods to determine creep strain...

ASTM E2996-20(2026) - Standard Guide for Workforce Education in Nanotechnology Health and Safety
June 1, 2026 - ASTM International

5.1 This guide is to provide, at the undergraduate college level, a basic educational structure in the health and safety aspects of nanotechnology to organizations developing or carrying out education programs for the nanotechnology workforce. This guide helps to describe the minimum knowledge base...

ASTM D6846-02(2026) - Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage
June 1, 2026 - ASTM International

1.1 This practice covers the procedure for preparing laboratory prints of paste inks using a printing gage in conjunction with a flat-bed proof press. 1.2 This practice is applicable to the preparation of solid-area prints by direct letterpress or by dry offset on a flat substrate such as paper,...

ASTM D5011-17(2026) - Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
January 1, 2026 - ASTM International

1.1 These practices describe means for calibrating ambient, workplace or indoor ozone monitors, using transfer standards. 1.2 These practices describe five types of transfer standards: Practice A-Analytical instruments, Practice B-Boric acid potassium iodide (BAKI) manual analytical...

ASTM E824-26 - Standard Test Method for Transfer of Calibration From Reference to Field Radiometers
March 1, 2026 - ASTM International

1.1 This test method covers the transfer of calibration from reference to field pyranometer to be used for measuring and monitoring solar radiation. This standard is applicable to spectrally flat A, B, and C categories as defined in ISO 9060, as well as to silicon photodiode pyranometers....

ASTM E2945-14(2026) - Standard Test Method for Film Permeability Determination Using Static Permeability Cells
May 15, 2026 - ASTM International

1.1 This test method covers the measurement of the transmission of a gas through plastic membranes, sheeting, films, and fabric materials using a static sealed diffusion chamber. The test method monitors gas diffusion across a film membrane and provides measurements of (1) gas concentrations on...

ASTM ASTM51631-26 - Standard Practice for Use of Calorimetric Dosimetry Systems for Dose Measurements and Routine Dosimetry System Calibration in Electron Beams
May 1, 2026 - ASTM International

4.1 This practice is applicable to the use of calorimetric dosimetry systems for the measurement of absorbed dose in electron beams, the qualification of electron irradiation facilities, periodic checks of the performance of electron irradiation facilities, and calibration of other dosimetry...

ASTM F2193-26 - Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System
May 1, 2026 - ASTM International

4.1 Spinal implant constructs are typically a compilation of several components. Screws, plates, and rods are integral components of many spinal implant constructs. These components are designed to transfer load between the bone and the longitudinal or transverse element, or both. These...

ASTM D4340-26 - Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
April 1, 2026 - ASTM International

4.1 It is essential that engine coolants prevent heat-transfer corrosion of aluminum cylinder heads during engine operation. Any corrosion products formed may deposit on interior radiator surfaces, reducing heat-transfer efficiency of the radiator. Overheating and boil-over of the...

ASTM E976-15(2026) - Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response
May 1, 2026 - ASTM International

1.1 This guide defines simple economical procedures for testing or comparing the performance of acoustic emission sensors. These procedures allow the user to check for degradation of a sensor or to select sets of sensors with nearly identical performances. The procedures are not capable of...

ASTM F2746-26a - Standard Specification for Pilot's Operating Handbook (POH) for Light Sport Category Aircraft
May 1, 2026 - ASTM International

1.1 This specification provides the minimum requirements for a Pilot's Operating Handbook (POH) for an aircraft designed, manufactured, and operated as a light sport category aircraft. 1.2 This specification defines the POH information that shall be provided by the aircraft manufacturer of a new...

Advertisement