loading
ASTM D6871-26 - Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus
June 1, 2026 - ASTM International

This specification covers a high fire point natural vegetable oil ester insulating fluid for use as a dielectric and cooling medium in new and existing power and distribution electrical apparatus such as transformers and attendant equipment. The physical property requirement including color,...

ASTM D3426-19(2026) - Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
June 1, 2026 - ASTM International

5.1 It is possible for insulating materials used in high-voltage equipment to be subjected to transient voltage stresses, resulting from such causes as nearby lightning strokes. This is particularly true of apparatus such as transformers and switchgear used in electrical-power transmission...

ASTM D2759-00(2026) - Standard Practice for Sampling Gas from a Transformer Under Positive Pressure
January 1, 2026 - ASTM International

1.1 This practice covers the sampling of gas above the insulating liquid of a transformer. A gas sampling bottle collects the gas sample from the gas space that is at a positive pressure. 1.2 Representative samples of gas are taken for analysis to determine their compositions. 1.3 The values...

ASTM A876-17(2026) - Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
January 1, 2026 - ASTM International

1.1 This specification covers the detailed requirements to which the specified grades of flat-rolled, grain-oriented, fully processed electrical steels shall conform. These steels are used primarily in transformer cores operating at moderate to high magnetic flux densities at commercial...

ASTM D2300-08(2026) - Standard Test Method for Gassing of Electrical Insulating Liquids Under Electrical Stress and Ionization (Modified Pirelli Method)
January 1, 2026 - ASTM International

4.1 For certain applications when insulating liquid is stressed at high voltage gradients, it is desirable to be able to determine the rate of gas evolution or gas absorption under specified test conditions. At present time correlation of such test results with equipment performance is limited. 4.2...

ASTM D1903-08(2026) - Standard Practice for Determining the Coefficient of Thermal Expansion of Electrical Insulating Liquids of Petroleum Origin, and Askarels
January 1, 2026 - ASTM International

1.1 This practice covers the determination of the coefficient of thermal expansion of electrical insulating liquids of petroleum origin, and askarels, containing PCBs (polychlorinated biphenyls), when used as an insulating or cooling medium, or both, in cables, transformers, oil circuit...

ASTM D7720-21(2025) - Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
December 1, 2025 - ASTM International

1.1 This guide provides specific requirements to statistically evaluate measurand alarm thresholds, which are called alarm limits, as they are applied to data collected from in-service oil analysis. These alarm limits are typically used for condition monitoring to produce severity indications...

ASTM F1207M-12(2025) - Standard Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems (Metric)
June 15, 2025 - ASTM International

1.1 This specification covers electrical insulation monitoring devices intended as permanently installed units for use in the detection of ohmic insulation faults to ground in active AC ungrounded electrical systems. 1.2 Limitations-This specification does not cover devices which are not intended...

ASTM D94-25 - Standard Test Methods for Saponification Number of Petroleum Products
July 1, 2025 - ASTM International

1.1 These test methods cover the determination of the amount of constituents in petroleum products such as lubricants, additives, and transmission fluids that will saponify under the conditions of the test. Note 1: Statements defining this test and its significance when applied to electrical...

ASTM A1009-18(2024)e1 - Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for Transformer and Inductor Applications
November 1, 2024 - ASTM International

This specification deals with soft magnetic manganese zinc ferrite core materials for high frequency power transformer and filter inductor applications. Standard types of both power transformer and filter inductor material are defined. For power transformer use, there are five...

ASTM D3487-25 - Standard Specification for Mineral Insulating Liquid Used in Electrical Apparatus
May 1, 2025 - ASTM International

1.1 This specification covers unused mineral insulating oil of petroleum origin for use as an insulating and cooling medium in new and existing power and distribution electrical apparatus, such as transformers, regulators, reactors, circuit breakers, switchgear, and attendant equipment. 1.2...

ASTM A912/A912M-11(2025) - Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
May 1, 2025 - ASTM International

1.1 This test method covers tests for various magnetic properties of amorphous materials at power frequencies [25?Hz to 400?Hz] using a toroidal test transformer. The term "toroidal test transformer" is used to describe the test device, reserving the term "specimen" to refer to the...

ASTM D1868-24 - Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems
December 1, 2024 - ASTM International

1.1 This test method covers the detection and measurement of partial discharge (corona) pulses at the terminals of an insulation system under an applied test voltage, including the determination of partial discharge (corona) inception and extinction voltages as the test voltage is raised and...

ASTM D3382-24 - Standard Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques
December 1, 2024 - ASTM International

1.1 These test methods cover two bridge techniques for measuring the energy and integrated charge of pulse and pseudoglow partial discharges: 1.2 Test Method A makes use of capacitance and loss characteristics such as measured by the transformer ratio-arm bridge or the high-voltage Schering...

ASTM A901-24 - Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
November 1, 2024 - ASTM International

1.1 This specification covers the general requirements to which flat-cast, amorphous, semi-processed, iron-base magnetic core alloys must conform. 1.2 These alloys are produced by a rapid-quenching, direct-casting process, resulting in metals with noncrystalline (amorphous) structure. The metallic...

ASTM A697/A697M-13(2024) - Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
November 1, 2024 - ASTM International

1.1 This test method covers the determination of several ac magnetic properties of laminated cores made from flat-rolled magnetic materials. 1.2 This test method covers test equipment and procedures for the determination of impedance permeability and exciting power from voltage and current...

ASTM B1027-24 - Standard Guide for Obtaining a Representative Sample of Copper and Copper Alloy in Particulate Form for Analysis
July 1, 2024 - ASTM International

4.1 This guide is intended primarily for the sampling of particulated copper and copper alloy material for compliance with compositional specification requirements. "Granulated chops" commonly refers to wire and cable, but it may also include other forms and applications of copper such as, but not...

ASTM D3487-24 - Standard Specification for Mineral Insulating Liquid Used in Electrical Apparatus
June 1, 2024 - ASTM International

1.1 This specification covers unused mineral insulating oil of petroleum origin for use as an insulating and cooling medium in new and existing power and distribution electrical apparatus, such as transformers, regulators, reactors, circuit breakers, switchgear, and attendant equipment. 1.2...

ASTM D2140-24 - Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin
May 1, 2024 - ASTM International

1.1 This practice may be used to determine the carbon-type composition of mineral insulating oils by correlation with basic physical properties. For routine analytical purposes it eliminates the necessity for complex fractional separation and purification procedures. The practice is applicable to...

ASTM A867-24 - Standard Specification for Iron-Silicon Relay Steels
May 1, 2024 - ASTM International

1.1 This specification covers wrought iron-silicon (Fe-Si) steels that are generally used in the manufacture of electromechanical devices, such as relays and solenoids, requiring higher electrical resistivity, higher permeability, and lower coercivity and residual magnetism than provided by either...

Advertisement