loading
ASTM A788/A788M-26a - Standard Specification for Steel Forgings, General Requirements
August 1, 2026 - ASTM International

1.1 This specification covers a group of common requirements that, unless otherwise specified in the individual product specification, shall apply to steel forgings under any of the following specifications issued by ASTM: ASTM Designation Title A266/A266M Carbon Steel Forgings for Pressure Vessel...

ASTM A788/A788M-26 - Standard Specification for Steel Forgings, General Requirements
July 1, 2026 - ASTM International

1.1 This specification covers a group of common requirements that, unless otherwise specified in the individual product specification, shall apply to steel forgings under any of the following specifications issued by ASTM: ASTM Designation Title A266/A266M Carbon Steel Forgings for Pressure Vessel...

ASTM D8643-25 - Standard Test Method for Silica, Pelleted, Granulated - Attrition
November 1, 2025 - ASTM International

4.1 Attrition gives an indication of pellet stability and the amount of fines that may be created by pellet degradation in conveying, handling or transit. 4.2 A similar test method is known for carbon black, see Test Method D1508.

ASTM A835/A835M-10(2025) - Standard Specification for Sizes of Ferroalloys and Alloy Additives
September 1, 2025 - ASTM International

1.1 This specification covers standard nominal sizes and size tolerances of screened ferroalloy and alloy additive products. This specification provides a range of sizes as referenced in all ASTM specifications for ferroalloys and alloy additives. 1.2 The sizes and tolerances allow for varying...

ASTM A542/A542M-25 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
September 1, 2025 - ASTM International

1.1 This specification2 covers two types of 21/4 Cr-1 Mo and three types of Cr-Mo-V alloy steel plates for use in the quenched-and-tempered condition, intended for the fabrication of welded pressure vessels and components. 1.2 Material under this specification is available in five types, designated...

ASTM D8529-25 - Standard Guide for Implementing High THC Cannabis Transportation Program in a Cannabis Operation
August 1, 2025 - ASTM International

1.1 This general guide is developed to detail the secure transportation of high THC cannabis products, with varying formulas and potency thresholds, determined by respective regulatory bodies overseeing that specific territory, region, or country. It offers a flexible yet comprehensive framework...

ASTM G165-99(2025) - Standard Practice for Determining Rail-to-Earth Resistance
May 1, 2025 - ASTM International

1.1 This practice covers the procedures necessary to follow for measuring resistance-to-earth of the running rails which are used as the conductors for returning the train operating current to the substation in electric mass transit systems. 1.2 The values stated in SI units are to be...

ASTM F481-25 - Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
May 1, 2025 - ASTM International

This practice describes procedures for handling and installing thermoplastic pipe and corrugated pipe in septic tank leach fields, curtain drains, and from the septic tank to the leach field. Proper installation ensures that the pipe will satisfactorily convey and distribute partially treated waste...

ASTM A788/A788M-25a - Standard Specification for Steel Forgings, General Requirements
May 1, 2025 - ASTM International

1.1 This specification2 covers a group of common requirements that, unless otherwise specified in the individual product specification, shall apply to steel forgings under any of the following specifications issued by ASTM: ASTM Designation Title A266/A266M Carbon Steel Forgings for Pressure Vessel...

ASTM E2831/E2831M-11(2025) - Standard Guide for Deployment of Blast Resistant Trash Receptacles in Crowded Places
March 1, 2025 - ASTM International

1.1 This guide identifies the key factors that should be considered prior to the deployment of blast resistant trash receptacles (BRTRs) in crowded places. 1.1.1 Guidance is included for their deployment at interior and exterior locations associated with the crowded places. 1.2 Facilities and...

ASTM A788/A788M-25 - Standard Specification for Steel Forgings, General Requirements
March 1, 2025 - ASTM International

1.1 This specification2 covers a group of common requirements that, unless otherwise specified in the individual product specification, shall apply to steel forgings under any of the following specifications issued by ASTM: ASTM Designation Title A266/A266M Carbon Steel Forgings for Pressure Vessel...

ASTM D6198-18(2024) - Standard Guide for Transport Packaging Design
October 1, 2024 - ASTM International

4.1 This guide assists users in design and development of packaging intended for the protection of goods while they are in transit from point of origin to final destination. By following all steps of this guide, users will be assured that the most important factors are included in package...

ASTM A788/A788M-24a - Standard Specification for Steel Forgings, General Requirements
October 15, 2024 - ASTM International

1.1 This specification2 covers a group of common requirements that, unless otherwise specified in the individual product specification, shall apply to steel forgings under any of the following specifications issued by ASTM: ASTM Designation Title A266/A266M Carbon Steel Forgings for Pressure Vessel...

ASTM A737/A737M-17(2024)e1 - Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
August 15, 2024 - ASTM International

1.1 This specification2 covers high-strength low-alloy steel plates for service in welded pressure vessels and piping components. 1.2 This material is particularly intended for piping and pressure vessel applications where high strength and improved toughness are required. 1.3 Two grades,...

ASTM A788/A788M-24 - Standard Specification for Steel Forgings, General Requirements
August 15, 2024 - ASTM International

1.1 This specification2 covers a group of common requirements that, unless otherwise specified in the individual product specification, shall apply to steel forgings under any of the following specifications issued by ASTM: ASTM Designation Title A266/A266M Carbon Steel Forgings for Pressure Vessel...

ASTM A100-07(2024) - Standard Specification for Ferrosilicon
March 1, 2024 - ASTM International

This specification covers grades of ferrosilicon used for steel-making and foundry. The grades shall conform to the required chemical composition for silicon, carbon, sulfur, phosphorous, aluminum, manganese, calcium, and boron. Sizes available of ferrosilicon for various grades are specified....

ASTM E2665-08(2024) - Standard Specification for Archiving ITS-Generated Traffic Monitoring Data
May 1, 2024 - ASTM International

1.1 This specification describes data elements and schema for an archived data management system for intelligent transportation system (ITS)-generated traffic monitoring data, including conventional traffic monitoring data, data collected directly from ITS systems, and travel-time data from probe...

ASTM A533/A533M-24 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
March 1, 2024 - ASTM International

1.1 This specification2 covers one type of manganese-molybdenum and four types of manganese-molybdenum-nickel alloy steel plates for use in the quenched and tempered condition for the construction of welded pressure vessels. 1.2 Material under this specification is available in five types,...

ASTM D7437-23 - Standard Test Method for Temperature and Hard Water Stability of Engine Coolants
November 1, 2023 - ASTM International

4.1 This test method provides information on the stability of the engine coolant concentrate when stored at elevated temperatures for two weeks. These test conditions might simulate the conditions that a product would be subjected to in transit and storage in warehouses before delivery to...

ASTM E2844-23 - Standard Specification for Demonstrating That a Building's Location Provides Access to Public Transit
May 1, 2023 - ASTM International

1.1 This specification provides requirements for demonstrating that a building's location provides a minimal level of access to public transit such that building occupants can rely on public transit to travel to places of employment and to run typical errands. 1.2 This specification...

Advertisement