5.1 A number of types of jaw crushers have been used for laboratory abrasion tests (see Refs ((1-5)) and a limited amount of data has been published (6-10). With emphasis on the crusher described in Apparatus Section 6, this test method ranks materials and also indicates differences in wear life...
1.1 This guide covers general considerations for the use of test kits for quantitative determination of analytes in water and wastewater. Test kits are available from various manufacturers for the determination of a wide variety of analytes in drinking water, surface or ground waters, domestic and...
1.1 This practice2 covers the conversion tables and equations for converting kinematic viscosity in mm2/s at any temperature to Saybolt Universal viscosity in Saybolt Universal seconds (SUS) at the same temperature and for converting kinematic viscosity in mm2/s at 122?°F and 210?°F...
5.1 This procedure can be used for a variety of applications, including identifying unlabeled material, process control, raw material acceptance, product evaluation, and compositional change during environmental testing. 5.2 Rubber chemicals vary widely in their chemical and physical properties....
3.1 This guide uses a weight loss method of wear determination for the polymeric components used with hip joint prostheses, using serum or demonstrated equivalent fluid for lubrication, and running under a dynamic load profile representative of the human hip joint forces during walking (1, 2).5 The...
3.1 This practice uses a weight loss method of wear determination for the polymeric components or materials used in human joint prostheses using serum or demonstrated equivalent fluid for lubrication and running under a load profile representative of the appropriate human joint application (1, 2).4...
5.1 Degradation of fluid lubricants because of oxidation or thermal breakdown can result in fluid thickening or in the formation of acids or insoluble solids and render the fluid unfit for further use as a lubricant. 5.2 This test method can be used for estimating the oxidation stability of oils....
1.1 This guide covers recommendations for selecting appropriate kriging methods based on study objectives, exploratory data analysis, and analysis of spatial variation. 1.2 This guide considers commonly used forms of kriging, including ordinary kriging, simple kriging, lognormal kriging,...
1.1 This test method covers the evaluation of the shear stability of polymer-containing fluids. The test method measures the viscosity loss, in mm2/s and percent, at 100?°C of polymer-containing fluids when evaluated by a diesel injector apparatus procedure that uses European diesel injector test...
1.1 This test method describes a procedure that can be used in the field or in a laboratory to detect antigens indicative of microbial contamination in liquid fuels, including those blended with synthesized hydrocarbons or biofuels, with kinematic viscosities (at 40?°C) of =24?mm2s-1 (for example,...
This specification deals with alloy structural steel plates. Plate specimens addressed under this specification are available in four treatment conditions (as rolled or hot rolled; annealed; normalized; and normalized and tempered), three structural forms (rectangular; circular and semi-circular;...
1.1 These test methods specify procedures and equipment used for testing and evaluating a treadmill for compliance to Specification F2115. Both design and operational parameters will be evaluated. Where possible and applicable, accepted test methods from other recognized bodies will be used and...
1.1 This guide provides guidance in establishing procedures to be used in the design and analysis of odor evaluation studies intended to quantitatively assess product odors and odor control of absorbent hygiene products including, but not limited to, adult, baby, feminine, and pet absorbent...
3.1 Need for Lumber Grading: 3.1.1 Individual pieces of lumber, as they come from the saw, represent a wide range in quality and appearance with respect to freedom from knots, cross grain, shakes, and other characteristics. Such random pieces likewise represent a wide range in strength, utility,...
1.1 The goal of this guide is to recommend a universal label format (across manufacturers and various implants) of content and relative location of information necessary for final implant selection within an implant's overall package labeling. 1.2 This guide recommends package labeling for...
4.1 This guide is aimed at providing a range of in vivo model and experimental-related
1.1 These test methods specify procedures and apparatus used for testing and evaluating selectorized strength equipment for compliance to Specification F2216. Both design and operational parameters will be evaluated. Where possible and applicable, accepted test methods from other recognized bodies...
5.1 This test method is useful in evaluating the degree to which a grease would separate into fluid and solid components when subjected to high centrifugal forces. Flexible shaft couplings, universal joints, and rolling element thrust bearings are examples of machinery which subject...
4.1 This test method provides for the quantitative determination of inorganic chloride (chloride ion) in monoethylene glycol (MEG), diethylene glycol (DEG) and triethylene glycol (TEG) using ion chromatography with conductivity detection. The analysis time is less than 5 min with little or no...
1.1 This test method covers the determination of the propensity of a fabric to form pills and other related surface changes on textiles using the Stoll Quartermaster Universal Wear Tester with the frosting attachment. The procedure is generally applicable to all types of woven and knitted...
Narrow Your Results