loading
ASTM C1935-26 - Standard Practice for Installation Methods for Adhered Veneer Systems Using Thin Brick Units Made from Clay or Shale
June 1, 2026 - ASTM International

1.1 This practice is intended to provide accepted installation procedures for thin brick units in adhered veneer systems in residential and commercial construction. This information is meant to complement the specific installation instructions provided by manufacturers of clay and shale thin...

ASTM C1088-26 - Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
June 1, 2026 - ASTM International

1.1 This specification covers thin veneer brick units made from clay, shale, fire clay, sand, or mixtures thereof, and fired to incipient fusion for use in adhered or fastened veneer applications. Three types of thin veneer brick units in each of two grades are covered. In this...

ASTM C844-26 - Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
May 1, 2026 - ASTM International

1.1 This specification covers the minimum requirements for, and methods of, application of gypsum veneer base for gypsum veneer plasters. 1.2 Gypsum veneer base shall not be used as a base for direct adhesive application of ceramic, metal, or plastic tile in areas exposed to...

ASTM C1780-26 - Standard Practice for Installation Methods for Cement-based Adhered Masonry Veneer
January 1, 2026 - ASTM International

1.1 This practice is intended to provide accepted procedures to designers and installers of cement-based adhered masonry veneer in residential and commercial construction. This information is meant to complement the specific installation instructions provided by manufacturers of cement-based...

ASTM E1317-26a - Standard Test Method for Flammability of Surface Finishes
June 1, 2026 - ASTM International

5.1 This test method provides a means for evaluation of the flammable performance of surface finish materials. 5.2 A specimen of the surface finish of concern is mounted on the support material contemplated for use and subjected to a controlled significant radiant-flux exposure. 5.3 All specimens...

ASTM E1317-26 - Standard Test Method for Flammability of Surface Finishes
May 15, 2026 - ASTM International

5.1 This test method provides a means for evaluation of the flammable performance of surface finish materials. 5.2 A specimen of the surface finish of concern is mounted on the support material contemplated for use and subjected to a controlled significant radiant-flux exposure. 5.3 All specimens...

ASTM C901-26 - Standard Guide for Design and Installation of Prefabricated Masonry Elements
June 1, 2026 - ASTM International

1.1 This guide provides information regarding masonry elements constructed at locations other than in-place. Prefabrication may occur on the jobsite or offsite and transported to the jobsite. This guide covers lintels, arches, sloped sills, spandrels, soffits, wall panels, and other masonry...

ASTM C1877-25a - Standard Specification for Dry-Cast Adhered Concrete Masonry Veneer Units
December 1, 2025 - ASTM International

1.1 This specification covers solid, dry-cast, concrete masonry units intended for use as an interior and exterior adhered veneer and are machine-made from hydraulic cement, water, and suitable mineral aggregates with or without the inclusion of other materials. 1.2 The text of this...

ASTM D7433-19(2026) - Standard Test Method for Measuring Surface Water Absorption of Overlaid Wood-Based Panels
April 1, 2026 - ASTM International

3.1 Water absorptiveness through the surface of an overlaid panel is a function of various characteristics of the overlay and substrate, including overlay resin content, thickness of the overlay, porosity, and permeability. 3.2 This test method is useful in comparing the water absorption...

ASTM D8223-19(2026) - Standard Practice for Evaluation of Fire-Retardant Treated Laminated Veneer Lumber
January 1, 2026 - ASTM International

1.1 This practice covers procedures for the evaluation of laminated veneer lumber (LVL) pressure-treated with commercially available fire retardants after exposure to both standard environmental conditions and an extended exposure to elevated temperature. 1.2 LVL products utilizing overlays...

ASTM D3500-20(2026) - Standard Test Methods for Wood Structural Panels in Tension
April 1, 2026 - ASTM International

1.1 These test methods cover the determination of the tensile properties of wood structural panels. 1.2 Wood structural panels in use include plywood, oriented strand board and composites of veneer, and other wood-based layers. 1.3 Test Method A, Tensile Test for Small Specimens: 1.3.1 This...

ASTM C1780-25a - Standard Practice for Installation Methods for Cement-based Adhered Masonry Veneer
June 1, 2025 - ASTM International

1.1 This practice is intended to provide accepted procedures to designers and installers of cement-based adhered masonry veneer in residential and commercial construction. This information is meant to complement the specific installation instructions provided by manufacturers of cement-based...

ASTM C587-24 - Standard Specification for Gypsum Veneer Plaster
October 1, 2024 - ASTM International

1.1 This specification covers calcined gypsum mixed at the mill with other ingredients to control working quality and setting time; specifically designed as a veneer plaster to be applied over gypsum base for veneer plasters, masonry or concrete surfaces to a maximum thickness of 1/4...

ASTM D925-14(2025) - Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)
July 1, 2025 - ASTM International

5.1 Rubber in contact with light colored organic finishes may stain the surfaces in contact with the rubber (contact staining) and surfaces adjacent to or beyond the rubber (migration staining), especially under conditions of heat, pressure, or sunlight. When a light colored rubber veneer or...

ASTM C1780-25 - Standard Practice for Installation Methods for Cement-based Adhered Masonry Veneer
January 1, 2025 - ASTM International

1.1 This practice is intended to provide accepted procedures to designers and installers of cement-based adhered masonry veneer in residential and commercial construction. This information is meant to complement the specific installation instructions provided by manufacturers of cement-based...

ASTM C1877-25 - Standard Specification for Dry-Cast Adhered Concrete Masonry Units
August 1, 2025 - ASTM International

1.1 This specification covers solid, dry-cast, concrete masonry units intended for use as an interior and exterior adhered veneer and are machine-made from hydraulic cement, water, and suitable mineral aggregates with or without the inclusion of other materials. 1.2 The text of this...

ASTM D4442-20(2025) - Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
August 1, 2025 - ASTM International

1.1 These test methods cover the determination of the moisture content (MC) of wood, veneer, and other wood-based materials, including those that contain adhesives and chemical additives. The test procedures appear in the following order: Sections Method A-Primary Oven-Drying Method 5 Method...

ASTM C1670/C1670M-24a - Standard Specification for Adhered Manufactured Stone Masonry Veneer Units
December 1, 2024 - ASTM International

1.1 This specification covers the minimum product requirements for adhered manufactured stone masonry veneer units applied as an adhered veneer to exterior and interior walls and structures suitable to receive units. 1.2 The property requirements of this specification apply at the...

ASTM C55-25 - Standard Specification for Dry-Cast Concrete Building Brick
July 1, 2025 - ASTM International

1.1 This specification covers solid, dry-cast, concrete building brick intended for interior and exterior use in constructing structural masonry, and are machine-made from hydraulic cement, water, and suitable mineral aggregates with or without the inclusion of other materials. Note 1:...

ASTM C1935-24 - Standard Practice for Installation Methods for Adhered Veneer Systems Using Thin Brick Units Made from Clay or Shale
December 15, 2024 - ASTM International

1.1 This practice is intended to provide accepted installation procedures for thin brick units in adhered veneer systems in residential and commercial construction. This information is meant to complement the specific installation instructions provided by manufacturers of clay and shale thin...

Advertisement