loading
MIL-DTL-13623 - SWITCH, ROTARY: 28 VOLT DC
July 6, 2020 - NPFC

Scope. This specification covers 28 volt (V) direct current (dc) rotary switches intended primarily for use in tactical vehicles (see 6.1).

PIP ELSWC03 - 600-Volt Power and Control Cable Specification
March 1, 2016 - PIP

This Practice provides requirements for 600-volt-rated power and control tray cable (Type TC) and metal-clad (Type MC) cable. This Practice describes the minimum technical requirements for fabrication, inspection, testing, and shipping of insulated copper cable. This Practice covers 600-...

ANSI C57.12.13 - Conformance Requirements for Liquid-Filled Transformers Used in Unit Installations, Including Unit Substations
January 1, 1982 - ANSI

This standard covers conformance tests and requirements for liquid-filled transformers. Such transformers may be remotely or integrally associated with either primary and secondary switchgear or substations, or both, and rated not greater than 2500 kVA, with voltages not exceeding 38 kV (35-kV...

PIP ELSWC05 - 300-Volt Instrumentation Tray Cable Specification
August 1, 2009 - PIP

This Practice provides requirements for manufacturing and testing 300-volt-rated instrumentation tray cable. This Practice describes the technical requirements for manufacturing, inspection, testing, and shipping of insulated copper or thermocouple alloy conductor cable for...

ANSI C78.1457 - 200-WATT, 100-VOLT, S66 HIGH-PRESSURE SODIUM LAMPS
ANSI
A description is not available for this item.
ANSI C78.1356 - 150-WATT 100-VOLT S56 HI-PRESSURE SODIUM LAMP
ANSI
A description is not available for this item.
ANSI Z245.5 - Equipment Technology and Operations for Wastes and Recyclable Materials - Baling Equipment – Safety Requirements for Installation, Maintenance, Modification, Repair and Operation
May 1, 2013 - ANSI

This standard revises safety requirements with respect to the installation, operation, maintenance, service, repair, modification, and reconstruction (where applicable) of baling equipment covered by ANSI Z245.5 - 2008, Baling Equipment - Safety Requirements. The requirements of this...

ANSI Z245.51 - Equipment Technology and Operations for Wastes and Recyclable Materials – Baling Equipment – Safety Requirements
May 1, 2013 - ANSI

This standard establishes requirements to minimize the risk of fire, electrical shock and injury to persons during operation and maintenance of baling equipment for use with wastes and recyclable materials by commercial businesses, apartment buildings, industrial plants, waste processing...

MIL-DTL-45068 - LIGHT, DOME, VEHICULAR, 24 VOLT DC
March 29, 2021 - NPFC

Scope. This specification covers one type of dome light used in military vehicles equipped with nominal 24 volt (V) direct current (dc) electrical systems. The dome light contains a white and a blue lamp (see 6.1).

ANSI C37.12 - AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Specifications Guide
January 1, 1991 - ANSI

These specifications apply to all indoor and outdoor types of ac high-voltage circuit breakers rated above 1000 volts. This document is issued only as a guide for use in compiling specifications for ac high-voltage circuit breakers. The imperative mode of the language is illustrative of that...

QPL-13735 - Switches, Toggle: 28 Volt DC
October 24, 2019 - NPFC

QUALIFIED PRODUCT LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-DTL-13735 Switches, Toggle: 28 Volt DC This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not...

ANSI/ASA S12.15 - AMERICAN NATIONAL STANDARD For Acoustics – Portable Electric Power Tools, Stationary and Fixed Electric Power Tools, and Gardening Appliances – Measurement of Sound Emitted
December 7, 1992 - ASA

This standard applies to portable electric power tools rated at or below 250 volts (V) for use in accordance with American National Standard National Electric Code, ANSI/NFPA 70-1990. This standard also applies to stationary and fixed electric power tools rated at or below 600 V for...

ANSI/NEMA HP 4 - Electrical and Electronic FEP (Fluorinated Ethylene Propylene) Insulated High Temperature Hook-Up Wire, Types KT (250 Volt), K (600 Volt), and KK (1000 Volt)
January 1, 2012 - NEMA

This standards publication covers specific requirements for FEP (Fluorinated Ethylene Propylene) insulated solid and stranded wire, designed for the internal wiring of high reliability electrical and electronic equipment. This standards publication addresses 250 volt (type KT), 600...

A-A-59535 - PUMP, FUEL, ELECTRICAL: 12 AND 24 VOLT DC, NEGATIVE GROUND
January 28, 2019 - NPFC

This commercial item description (CID) covers the general requirements for pump, fuel, electrical: 12 and 24 volt DC. Pump, fuel, electrical: 12 and 24 volt DC covered by this CID are intended for commercial/industrial applications.

ANSI Z245.21 - Stationary Compactors — Safety Requirements for Manufacturing and Reconstruction
January 1, 2013 - ANSI

This standard revises requirements to minimize the risk of fire, electrical shock and injury to persons during operation and maintenance of stationary compacting equipment for use with wastes and recyclable materials by commercial businesses, apartment buildings, industrial plants, waste processing...

NEMA VT P1 - The Value of Volt-VAR Technologies
January 1, 2018 - NEMA

Executive Summary It's been estimated that every year in the U.S., about five percent of the electricity that is transmitted and distributed is lost.1 This is the equivalent of powering all of California for one year. Reducing electricity losses, even by a small amount, could result in substantial...

UL 82 - Electric Gardening Appliances
August 31, 2017 - ULSE

1.1 These requirements cover cord-connected, electrically-operated gardening appliances, such as cultivators, edger-trimmers, and the like, rated 250 volts or less for use in accordance the National Electrical Code, ANSI/NFPA 70. 1.2 These requirements also cover...

Advertisement