loading
ASTM F2291-26 - Standard Practice for Design of Amusement Rides and Devices
June 1, 2026 - ASTM International

1.1 This practice establishes criteria for the design of amusement rides, devices and major modifications to amusement rides and devices manufactured after the effective date of publication except as noted in 1.2. 1.2 This practice in its entirety shall not apply to the following: 1.2.1 Playground...

ASTM F2965-25 - Standard Guide for Selection of Walkway Surfaces and Treatments When Considering Aggressive Contaminant Conditions in Commercial and Industrial Environments (Not Including Construction Work)
September 1, 2025 - ASTM International

1.1 This guide is intended to assist in the selection of walkway surfaces and treatments where the reasonably foreseeable presence of aggressive contaminants produces the risk of a fall event(s) in commercial and industrial environments (not including construction work), for persons wearing...

ASTM D3441-25 - Standard Test Method for Mechanical Cone Penetration Testing of Soils
October 15, 2025 - ASTM International

1.1 This test method covers the procedure for determining the resistance of a mechanical cone as it is advanced into subsurface soils at a steady rate. 1.2 This test method may also be used to determine the frictional resistance of a cylindrical sleeve located behind the conical point as it is...

ASTM F3218-25 - Standard Practice for Documenting Environmental Conditions for Utilization with Robotic, Automatic, or Autonomous System Test Methods
September 1, 2025 - ASTM International

4.1 This section provides a description of the environmental conditions listed in Section 1 and describes the sub-conditions within each condition. Examples provided for many of the conditions and sub-conditions are provided as guidance only. Each of the conditions described should be evaluated and...

ASTM F2291-25c - Standard Practice for Design of Amusement Rides and Devices
September 1, 2025 - ASTM International

1.1 This practice establishes criteria for the design of amusement rides, devices and major modifications to amusement rides and devices manufactured after the effective date of publication except as noted in 1.2. 1.2 This practice in its entirety shall not apply to the following: 1.2.1 Playground...

ASTM D2047-25 - Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine
May 1, 2025 - ASTM International

4.1 Test Method D2047 establishes a compliance criterion relating static coefficient of friction measurements of flooring surfaces with human locomotion safety. The compliance criterion is based on extensive experiential data from residential, commercial, industrial and institutional walkway...

ASTM F2291-25b - Standard Practice for Design of Amusement Rides and Devices
August 1, 2025 - ASTM International

1.1 This practice establishes criteria for the design of amusement rides, devices and major modifications to amusement rides and devices manufactured after the effective date of publication except as noted in 1.2. 1.2 This practice in its entirety shall not apply to the following: 1.2.1 Playground...

ASTM F2291-25a - Standard Practice for Design of Amusement Rides and Devices
June 15, 2025 - ASTM International

1.1 This practice establishes criteria for the design of amusement rides, devices and major modifications to amusement rides and devices manufactured after the effective date of publication except as noted in 1.2. 1.2 This practice in its entirety shall not apply to the following: 1.2.1 Playground...

ASTM F2291-25 - Standard Practice for Design of Amusement Rides and Devices
April 1, 2025 - ASTM International

1.1 This practice establishes criteria for the design of amusement rides, devices and major modifications to amusement rides and devices manufactured after the effective date of publication except as noted in 1.2. 1.2 This practice in its entirety shall not apply to the following: 1.2.1 Playground...

ASTM F3539-24 - Standard Practice for Creation of Walkway Tribometer Interlaboratory Study Reports and Test Procedures
April 1, 2024 - ASTM International

1.1 This practice covers creation of interlaboratory study reports and test procedures for the use of portable walkway tribometers for obtaining walkway surface friction measurements. 1.2 This practice does not address the interpretation of data relative to pedestrian safety. 1.3 This...

ASTM F2508-23 - Standard Practice for Validation of Walkway Tribometry Using Research-based Reference Materials
August 15, 2023 - ASTM International

1.1 This practice establishes a procedure for validating walkway tribometry using reference materials that have been ranked and differentiated by human subjects in a peer-reviewed study. 1.2 This practice describes the necessary materials, specifications, and cleaning processes for reference...

ASTM F3627-24 - Standard Guide for Premises Design Considering Snow and Ice Management for the Reduction of Pedestrian Slips
February 1, 2024 - ASTM International

1.1 This guide covers design, planning, construction, renovation, maintenance, and risk management considerations of the physical exterior property with regard to snow and ice management for the purpose of reducing the risk of pedestrian slips. The provisions in this guide may also apply to the...

ASTM F2291-24 - Standard Practice for Design of Amusement Rides and Devices
May 1, 2024 - ASTM International

1.1 This practice establishes criteria for the design of amusement rides, devices and major modifications to amusement rides and devices manufactured after the effective date of publication except as noted in 1.2. 1.2 This practice in its entirety shall not apply to the following: 1.2.1 Playground...

ASTM G219-23 - Standard Guide for Determination of Static Coefficient of Friction of Test Couples Using an Inclined Plane Testing Device
December 15, 2023 - ASTM International

5.1 Guide G115 lists a number of ASTM International standards that use the inclined plane test rig to measure the static coefficient of specific tribosystems. This guide applies to any material couple that can be made into test specimens; one being in the form of a rider and the other a plane that...

ASTM F3627-23 - Standard Guide for Premises Design Considering Snow and Ice Management for the Reduction of Pedestrian Slips
October 15, 2023 - ASTM International

1.1 This guide covers design, planning, construction, renovation, maintenance, and risk management considerations of the physical exterior property with regard to snow and ice management for the purpose of reducing the risk of pedestrian slips. The provisions in this guide may also apply to the...

UL 96A - Installation Requirements for Lightning Protection Systems
September 29, 2023 - ULSE

1.1 These requirements cover the installation of lightning protection systems on all types of structures other than structures used for the production, handling, or storage of ammunition, explosives, flammable liquids or gases, and other explosive ingredients including dust. 1.2 These requirements...

ASTM F2291-23b - Standard Practice for Design of Amusement Rides and Devices
September 1, 2023 - ASTM International

1.1 This practice establishes criteria for the design of amusement rides, devices and major modifications to amusement rides and devices manufactured after the effective date of publication except as noted in 1.2. 1.2 This practice shall not apply to: 1.2.1 Patron directed amusement rides or...

ASTM F2291-23a - Standard Practice for Design of Amusement Rides and Devices
August 1, 2023 - ASTM International

1.1 This practice establishes criteria for the design of amusement rides, devices and major modifications to amusement rides and devices manufactured after the effective date of publication except as noted in 1.2. 1.2 This practice shall not apply to: 1.2.1 Patron directed amusement rides or...

ASTM F3539-22 - Standard Practice for Creation of Walkway Tribometer Interlaboratory Study Reports and Test Procedures
February 1, 2022 - ASTM International

1.1 This practice covers creation of interlaboratory study reports and test procedures for the use of portable walkway tribometers for obtaining walkway surface friction measurements. 1.2 This practice does not address the interpretation of data relative to pedestrian safety. 1.3 This...

ASTM F2948-21 - Standard Guide to Walkway Auditor Qualifications
April 1, 2021 - ASTM International

1.1 This guide outlines basic knowledge topics that walkway auditors should consider (where applicable) when conducting audits of pedestrian walkways. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of...

Advertisement