loading
HI WATER TREATMENT PLANT - Water Treatment Plant Pumps: Guidelines For Selection, Application, And Operation
January 1, 2017 - HI/HYDRAUL
A description is not available for this item.
SWRI WATER REPELLANT - CLEAR WATER REPELLENT FOR MASONRY
January 1, 1994 - SWRI

This comprehensive manual includes information on clear water repellent materials for both vertical and horizontal surfaces. Also included are a glossary, product comparisons, specifications, monograph and performance test criteria.

WATER TREATMENT PLANT - WATER TREATMENT PLANT DESIGN
AWWA
A description is not available for this item.
NSF WATER ADDITIVE SET - DRINKING WATER ADDITIVE SET - STANDARDS 60 AND 61
NSF
A description is not available for this item.
ASTM F877-26 - Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
August 1, 2026 - ASTM International

This specification covers requirements, test methods, and methods of marking for crosslinked polyethylene plastic hot- and cold-water distribution systems components made in one standard dimension ratio. Components are comprised of tubing and fittings intended for use in residential and...

Terrestrial Water Cycle and Climate Change: Natural and Human-Induced Impacts
September 1, 2016 - WILEY

The Terrestrial Water Cycle: Natural and Human-Induced Changes is a comprehensive volume that investigates the changes in the terrestrial water cycle and the natural and anthropogenic factors that cause these changes. This volume brings together recent progress and...

ASTM D8020-15(2026) - Standard Test Method for Freeze-Thaw Viscosity Stability of Water-Based Inks and Ink Vehicles
March 1, 2026 - ASTM International

1.1 This test method covers a procedure for evaluating the effect of freeze-thaw cycling on the properties of water-based inks and ink vehicles. 1.2 This test is based on a similar standard test for coatings; Test Method D2243. 1.3 The values stated in SI units are to be regarded as...

AWWA 64303 - OUR WATER CYCLE DVD
AWWA
A description is not available for this item.
ASTM E3006-20(2026) - Standard Practice for Ultraviolet Conditioning of Photovoltaic Modules or Mini-Modules Using a Fluorescent Ultraviolet (UV) Lamp Apparatus
June 1, 2026 - ASTM International

5.1 Photovoltaic modules and components must be resistant to prolonged exposure to solar radiation, moisture, and heat. Degradation of polymeric components, delamination at the encapsulant and other interfaces, and moisture ingress are among the degradation modes known to decrease the output of...

ASTM E2912-26 - Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction
May 1, 2026 - ASTM International

5.1 This test method provides for the following observations, measurements and evaluations of an open state during the test fire. 5.1.1 Ability of the test specimen to resist the passage of flames, radiation, and hot gases caused by sudden direct flame impingement. 5.1.2 Transmission of heat...

ASTM D8380-21(2026) - Standard Test Method for Dry Abrasion Resistance of Hydrophobic and Omniphobic Coatings
February 1, 2026 - ASTM International

5.1 The test method is to be used to determine the abrasion resistance or mechanical durability of thin omniphobic or thin hydrophobic coatings. These coatings are often used to enhance the surface's value by promoting fingerprint resistance, water removal, stain resistance, and easy-clean...

ASTM C666/C666M-26 - Standard Test Method for Resistance? of? Concrete? to? Rapid? Freezing? and? Thawing
February 1, 2026 - ASTM International

1.1 This test method covers the determination of the resistance of concrete specimens to rapidly repeated cycles of freezing and thawing in the laboratory by two different procedures: Procedure A, Rapid Freezing and Thawing in Water, and Procedure B, Rapid Freezing in Air and Thawing...

ASTM F3253-26 - Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systems
February 1, 2026 - ASTM International

1.1 This specification covers requirements, test methods, and marking requirements for crosslinked polyethylene (PEX) tubing with a polymeric oxygen barrier layer, made in one standard dimension ratio (SDR 9), and distribution system components intended for hydronic heating and cooling applications...

ASTM D1782-26 - Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
January 1, 2026 - ASTM International

9.1 Cation exchange materials are frequently used in the sodium form to exchange divalent and trivalent ions in the influent water for sodium ions on the resin sites. This process is commonly referred to as softening water since it removes those ions that form a "hard" curd of...

ASTM E2785-26 - Standard Practice for Exposure of Firestop Materials to Various Specified Enhanced Environmental Factors
January 1, 2026 - ASTM International

1.1 This practice evaluates a change in physical properties of firestop materials after exposure to an enhanced environmental factor. This practice does not evaluate the fire performance of the firestop materials. 1.2 This practice uses the following exposures: 1.2.1 Elevated temperature, 1.2.2...

ASTM D8169/D8169M-26 - Standard Test Methods for Deep Foundation Elements Under Bi-Directional Static Axial Compressive Load
March 15, 2026 - ASTM International

4.1 The bi-directional axial compressive load test provides separate, direct measurements of the axial capacity mobilized above an embedded jack assembly and element end bearing plus any axial capacity mobilized below the jack assembly. The maximum mobilized axial capacity equals two times the...

ASTM E1578-18(2026) - Standard Guide for Laboratory Informatics
January 1, 2026 - ASTM International

1.1 This guide helps describe the laboratory informatics landscape and covers issues commonly encountered at all stages in the life cycle of laboratory informatics from inception to retirement. It explains the evolution of laboratory informatics tools used in today's laboratories such as...

ASTM C1763-20(2025) - Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
September 1, 2025 - ASTM International

1.1 This test method determines the amount of water retained (excluding surface water) by flat or cylindrical specimens of thermal insulations after these materials have been fully immersed in liquid water for a prescribed time interval under isothermal conditions. This test...

Advertisement