loading
HI WATER TREATMENT PLANT - Water Treatment Plant Pumps: Guidelines For Selection, Application, And Operation
January 1, 2017 - HI/HYDRAUL
A description is not available for this item.
ASTM D3866-18(2026) - Standard Test Methods for Silver in Water
May 1, 2026 - ASTM International

1.1 These test methods cover the atomic absorption determination of silver in water. Section 34 on Quality Control pertains to these test methods. Three test methods are given as follows: 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are...

ASTM D4382-18(2026) - Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace
May 1, 2026 - ASTM International

5.1 Barium ranks about sixth in order of abundance in nature; however, it is normally found in only trace quantities in drinking water. Consumption, inhalation, or absorption of 500?mg to 600?mg is considered fatal to human beings. Lower levels may result in disorders of the heart, blood...

ASTM D6794-26 - Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6?h) Heating Time
June 1, 2026 - ASTM International

1.1 This test method covers the determination of the tendency of an oil to form a precipitate that can plug an oil filter. It simulates a problem that may be encountered in a new engine run for a short period of time, followed by a long period of storage with some water in the oil. 1...

ASTM D6795-26 - Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30?min) Heating Time
June 1, 2026 - ASTM International

1.1 This test method covers the determination of the tendency of an oil to form a precipitate that can plug an oil filter. It simulates a problem that may be encountered in a new engine run for a short period of time, followed by a long period of storage with some water in the oil. 1...

ASTM D8422-21 - Standard Practice for Pre-Stressing Terminal Point-of-Use Water Filters before Testing by Test Method F838
November 1, 2021 - ASTM International

1.1 This practice covers terminal point-of-use (POU) filters intended for intermittent use on showers, faucets, and other water use end-point devices that deliver hot and cold potable water. 1.2 This practice does not cover in-line filters. 1.3 Units-The values stated in...

ASTM D8665-26 - Standard Test Method for Measuring the Gelation Propensity of Automotive Engine Oils After Treatment with Acidified Water
June 1, 2026 - ASTM International

5.1 It is normal for some of the combustion products of an internal combustion engine, such as carbon dioxide, to penetrate the engine oil and be retained in it. 5.2 When an engine is run for a period and then stored over a long period of time, the by-products of combustion might be retained in the...

ASTM D6800-18(2026) - Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals
May 1, 2026 - ASTM International

1.1 Toxic elements may be present in ambient waters and may enter the food chain via uptake by plants and animals; the actual concentrations of toxic metals are usually sub-ng/mL. The U.S. EPA has published its Water Quality Standards in the U.S. Federal Register 40 CFR?131.36, Minimum...

ASTM D3240-25 - Standard Test Method for Undissolved Water In Aviation Turbine Fuels
October 1, 2025 - ASTM International

5.1 Undissolved (free) water in aviation fuel can encourage the growth of microorganisms and subsequent corrosion in the tanks of aircraft and can also lead to icing of filters in the fuel system. Control of free water is exercised in ground fueling equipment by use of...

SWRI CLEAR WATER - Clear Water Repellent Manual
January 1, 2007 - SWRI

The new and updated 2007 Clear Water Repellent Manual is a source of un-biased information that can make sense of a topic that is often either oversold or misunderstood. This manual has all the makings of a great training program as well as an overall education piece and discusses the...

ASTM D5259-24 - Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
April 1, 2024 - ASTM International

1.1 This test method covers a membrane filter (MF) procedure for the detection and enumeration of the enterococci bacteria in water. The enterococci, which include Entero-coccus faecalis (E. faecalis), E. faecium, and their varieties are commonly found in the feces of humans and other...

ASTM D7224-26 - Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
March 15, 2026 - ASTM International

1.1 This test method covers a rapid portable means for field and laboratory use to rate the ability of kerosine-type aviation turbine fuels, both neat and those containing additives, to release entrained or emulsified water when passed through coalescing material. 1.1.1 This test method is...

ASTM D4188-17(2025) - Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test in Water
December 1, 2025 - ASTM International

1.1 This practice covers the procedure used to perform pressure in-line coagulation-flocculation-filtration of water and waste water. It is applicable to water and waste water with relatively low suspended solids (<30 mg/L). The practice is applicable for any size...

ASTM D8649-26 - Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry
May 1, 2026 - ASTM International

5.1 Pesticides may be used in various agricultural and household products. These products may enter waterways at low levels through run-off or misuse near water resources. Hence, there is need for a quick, easy, and robust method to determine pesticide concentration in water matrices...

ASTM D1987-22(2026) - Standard Test Method for Biological Clogging of Geotextile, Drainage Geocomposites, or Soil/Geotextile Filters
June 1, 2026 - ASTM International

5.1 This test method is performance oriented for determining if, and to what degree, different liquids create biological activity on geotextile filters thereby reducing their flow capability. The use of the method is primarily oriented toward landfill leachates but can be performed with any...

ASTM F2075-26 - Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
June 1, 2026 - ASTM International

This specification covers engineered wood fiber for use as a playground safety surface under and around playground equipment. This specification establishes minimum requirements for the factors that determine particle size, consistency, purity, ability to drain, and heavy metal concentrations...

ASTM D6884-26 - Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems
March 15, 2026 - ASTM International

5.1 An articulating concrete block system is comprised of a matrix of individual concrete blocks placed together to form an erosion-resistant system with specific hydraulic performance characteristics. These systems in practice are commonly referred to as ACB revetment systems. The system includes...

ASTM D5782-18(2026) - Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
March 1, 2026 - ASTM International

1.1 This guide covers how direct (straight) air-rotary drilling procedures may be used for geoenvironmental exploration and installation of subsurface water-quality monitoring devices. Note 1: The term direct with respect to the air-rotary drilling method of this guide indicates that...

ASTM D1687-17(2025) - Standard Test Methods for Chromium in Water
July 1, 2025 - ASTM International

1.1 These test methods cover the determination of hexavalent and total chromium in water. Section 34 on Quality Control pertains to these test methods. Three test methods are included as follows: Test Method Concentration Range Sections A-Photometric Diphenyl- carbohydrazide ?0.01?mg/L to 0...

ASTM C1519-10(2026) - Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
April 1, 2026 - ASTM International

4.1 This test method describes the procedure to evaluate or compare, or both, the durability of sealants when subjected to accelerated weathering and cyclic movement in a joint. 4.2 Sealant installation procedures, design considerations and movement during cure affect the aging processes and are...

Advertisement