loading
HI WATER TREATMENT PLANT - Water Treatment Plant Pumps: Guidelines For Selection, Application, And Operation
January 1, 2017 - HI/HYDRAUL
A description is not available for this item.
ISA CALIBRATION: A TECHNI - Calibration: A Technician's Guide
January 1, 2005 - ISA

This comprehensive review of calibration provides an excellent foundation for understanding principles and applications of the most frequently performed tasks of a technician. Topics addressed include terminology, bench vs. field calibration, loop vs. individual instrument...

SWRI WATER REPELLANT - CLEAR WATER REPELLENT FOR MASONRY
January 1, 1994 - SWRI

This comprehensive manual includes information on clear water repellent materials for both vertical and horizontal surfaces. Also included are a glossary, product comparisons, specifications, monograph and performance test criteria.

WATER TREATMENT PLANT - WATER TREATMENT PLANT DESIGN
AWWA
A description is not available for this item.
NSF WATER ADDITIVE SET - DRINKING WATER ADDITIVE SET - STANDARDS 60 AND 61
NSF
A description is not available for this item.
AWWA METERS SET - AWWA METERS SET
AWWA
A description is not available for this item.
ASTM E1201-25 - Standard Practice for Sampling Zooplankton with Conical Tow Nets
September 1, 2025 - ASTM International

5.1 The advantages of using conical tow nets are as follows: 5.1.1 They are relatively inexpensive and highly versatile in a variety of inland, estuarine, coastal, and marine waters. 5.1.2 They can be used from a small or large powered boat with a minimum of auxiliary equipment. 5.1.3 They can be...

ASTM D8226-25 - Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine
July 1, 2025 - ASTM International

1.1 This test method covers an engine test procedure for the measurement of the effects of automotive engine oils on the fuel economy of passenger cars and light-duty trucks with gross vehicle weight 3856?kg or less. The tests are conducted using a specified spark-ignition engine with a...

ASTM E2666-09(2025) - Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports
April 1, 2025 - ASTM International

5.1 Introduction-Mu numbers (friction values) measured by CFME can be used as guidelines for evaluating the surface friction deterioration of runway pavements and for identifying appropriate corrective actions required for safe aircraft operations. The original levels were based on the work of the...

ASTM F2338-24 - Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
November 1, 2024 - ASTM International

1.1 Test Packages-Packages that can be nondestructively evaluated by this test method include: 1.1.1 Rigid and semi-rigid non-lidded trays. 1.1.2 Trays or cups sealed with porous barrier lidding material. 1.1.3 Rigid, nonporous packages. 1.1.4 Flexible, nonporous packages. 1.2 Leaks Detected-This...

ASTM F3441-24a - Standard Guide for Measurement of pH Involving Resilient Flooring Installations
January 15, 2024 - ASTM International

1.1 This guide discusses procedures that may be used for evaluating the comparative change in pH of reagent water placed on the surface of a properly prepared concrete slab surface. 1.2 This guide is intended to be used in conjunction with the flat surface electrode pH meter...

ASTM F3441-24 - Standard Guide for Measurement of pH Involving Flooring Installations
January 1, 2024 - ASTM International

1.1 This guide covers procedures that may be used for evaluating the comparative change in pH of reagent water placed on the surface of a properly prepared concrete slab surface. 1.2 This guide is intended to be used in conjunction with the flat surface electrode pH meter...

ASTM D7512-09(2023) - Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation
December 15, 2023 - ASTM International

1.1 This guide covers the equipment and basic procedures for installation, operation, and calibration of optical equipment as a surrogate for the continuous determination of suspended-sediment concentration (SSC) in open channel flow. 1.2 This guide emphasizes general principles for the...

ASTM F3441-23a - Standard Guide for Measurement of pH Below Resilient Flooring Installations
September 1, 2023 - ASTM International

1.1 This guide discusses procedures that may be used for evaluating the comparative change in pH of reagent water placed on the surface of a properly prepared concrete slab surface. 1.2 This guide is intended to be used in conjunction with the flat surface electrode pH meter...

ASTM D1072-23 - Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
June 1, 2023 - ASTM International

This test method is for the determination of total sulfur in combustible fuel gases and is applicable to natural gases, manufactured gases, mixed gases, and other miscellaneous gaseous fuels. For the use of barium chloride titration following collection of sulfur dioxide by alternative procedures,...

ASTM F3441-23 - Standard Guide for Measurement of pH Below Resilient Flooring Installations
March 15, 2023 - ASTM International

1.1 This guide discusses procedures that may be used for evaluating the comparative change in pH of reagent water placed on the surface of a properly prepared concrete slab surface. 1.2 This guide is intended to be used in conjunction with the flat surface electrode pH meter...

ISO 3455 - Hydrometry — Calibration of current-meters in straight open tanks
January 1, 2021 - ISO

This document specifies a calibration method for mechanical type, electromagnetic type and acoustic type hydrometric current-meters used for point velocity measurement of flowing water. The method requires towing the instrument through still water in a straight open tank...

ASTM D6927-22 - Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures
November 1, 2022 - ASTM International

4.1 Marshall stability and flow values along with density, air voids in the total mix, voids in the mineral aggregate, or voids filled with asphalt binder, or both, filled with asphalt binder are used for laboratory mix design and evaluation of asphalt mixtures. In addition, Marshall stability and...

Advertisement