loading
HI WATER TREATMENT PLANT - Water Treatment Plant Pumps: Guidelines For Selection, Application, And Operation
January 1, 2017 - HI/HYDRAUL
A description is not available for this item.
SWRI WATER REPELLANT - CLEAR WATER REPELLENT FOR MASONRY
January 1, 1994 - SWRI

This comprehensive manual includes information on clear water repellent materials for both vertical and horizontal surfaces. Also included are a glossary, product comparisons, specifications, monograph and performance test criteria.

WATER TREATMENT PLANT - WATER TREATMENT PLANT DESIGN
AWWA
A description is not available for this item.
NSF WATER ADDITIVE SET - DRINKING WATER ADDITIVE SET - STANDARDS 60 AND 61
NSF
A description is not available for this item.
AWWA METERS SET - AWWA METERS SET
AWWA
A description is not available for this item.
ASTM E2047-10(2025) - Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays
June 1, 2025 - ASTM International

5.1 The design of a PV module or system intended to provide safe conversion of the sun's radiant energy into useful electricity must take into consideration the possibility of hazard should the user come into contact with the electrical potential of the array. In addition, the insulation system...

ASTM E2380/E2380M-15(2024) - Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
May 1, 2024 - ASTM International

1.1 This test method covers the connectivity of the texture as it relates to the drainage capability of the pavement through its surface and subsurface voids. This is a specific device that times how long it takes a known quantity of water, under gravitational pull, to escape through voids...

ASTM D7512-09(2023) - Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation
December 15, 2023 - ASTM International

1.1 This guide covers the equipment and basic procedures for installation, operation, and calibration of optical equipment as a surrogate for the continuous determination of suspended-sediment concentration (SSC) in open channel flow. 1.2 This guide emphasizes general principles for the application...

ASTM D7663-12(2024) - Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
June 1, 2024 - ASTM International

5.1 Soil-gas sampling results can be dependent on numerous factors both within and outside the control of the sampling personnel. Key variables are identified and briefly discussed below. Please see the documents listed in the Bibliography for more detailed information on the effect of various...

AWWA C706 - Direct-Reading, Remote-Registration Systems for Cold- Water Meters
January 17, 2010 - AWWA

This standard covers direct-reading, remote-registration systems for use on cold-water meters for water utility customer service and the materials and workmanship employed in the fabrication and assembly of these systems. Purpose The purpose of this standard is to...

ASTM E2380/E2380M-15(2019) - Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
December 1, 2019 - ASTM International

1.1 This test method covers the connectivity of the texture as it relates to the drainage capability of the pavement through its surface and subsurface voids. This is a specific device that times how long it takes a known quantity of water, under gravitational pull, to escape through voids...

ASTM D5389-93(2019) - Standard Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems
November 1, 2019 - ASTM International

1.1 This test method covers the measurement of flow rate of water in open channels, streams, and closed conduits with a free water surface. 1.2 The test method covers the use of acoustic transmissions to measure the average water velocity along a line between one or more...

DS/EN 13757-2 - Communication systems for meters – Part 2: Wired M-Bus communication
April 10, 2018 - DS

This draft European standard is applicable to the physical and link layer parameters of baseband communication over twisted pair (M Bus) for meter communication systems. It is especially applicable to thermal energy meters, heat cost allocators, water meters and gas...

ASTM C1789-14(2018) - Standard Test Method for Calibration of Hand-Held Moisture Meters on Gypsum Panels
October 1, 2018 - ASTM International

5.1 This Standard Test Method is intended for use in calibrating hand-held meters to accurately read from approximately 30 to 90 % ERH. Moisture content is related to the ERH or water activity of a material. 5.2 Hand-held meters provide a rapid means of sampling the moisture...

DS/EN ISO 4064-5 - Water meters for cold potable water and hot water – Part 5: Installation requirements (ISO 4064-5:2014)
May 29, 2017 - DS

This part of ISO 4064 applies to water meters used to meter the volume of cold potable water and hot water flowing through a fully charged, closed conduit. These water meters incorporate devices which indicate the integrated volume. This part of ISO...

ASTM E2047-10(2019) - Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays
April 1, 2019 - ASTM International

5.1 The design of a PV module or system intended to provide safe conversion of the sun's radiant energy into useful electricity must take into consideration the possibility of hazard should the user come into contact with the electrical potential of the array. In addition, the insulation system...

AIHA DIRECT-READING - DIRECT-READING COLORIMETRIC INDICATOR TUBES MANUAL
AIHA
A description is not available for this item.
Advertisement