loading
PCMCIA SYSTEM - PCMCIA SYSTEM ARCHITECTURE
PCMCIA
A description is not available for this item.
IEEE INFORMATION - INFORMATION GRAPHICS: A COMPRHENSIVE ILLUSTRATED REFERENCE
IEEE
A description is not available for this item.
ASHRAE SYSTEMS & EQUIP SI - 2020 ASHRAE Handbook HVAC Systems and Equipment SI Edition
January 1, 2020 - ASHRAE
A description is not available for this item.
ASHRAE SYSTEMS & EQUIP IP - 2020 ASHRAE Handbook HVAC Systems and Equipment I-P Edition
January 1, 2020 - ASHRAE
A description is not available for this item.
ASTM F3011-26 - Standard Specification for Performance of Angle of Attack System
June 1, 2026 - ASTM International

1.1 This performance specification covers simple systems that provide angle-of-attack information to a pilot, aircraft, or other systems. Note 1: More complex AoA systems can be addressed in annexes in the future. 1.2 In this performance specification, functional...

IEEE INFORMATION THEORY: - INFORMATION THEROY: 50 YEARS OF DISCOVERY
IEEE
A description is not available for this item.
ASTM F104-11(2026) - Standard Classification System for Nonmetallic Gasket Materials
June 1, 2026 - ASTM International

3.1 This classification system is intended to encourage uniformity in reporting properties; to provide a common language for communications between suppliers and consumers; to guide engineers and designers in the test methods commonly used for commercially available materials; and to...

ASTM F3174/F3174M-26 - Standard Specification for Establishing Operating Limitations and Information for Aeroplanes
May 1, 2026 - ASTM International

1.1 This specification covers airworthiness requirements for establishing general limitations and information to be contained in the aeroplane flight manual. This specification specifies what information shall be provided and does not state how such information shall be...

ASTM F3065/F3065M-26 - Standard Specification for Aircraft Propeller System Installation
June 1, 2026 - ASTM International

1.1 This specification addresses the airworthiness requirements for the installation and integration of propeller systems. 1.2 This specification is applicable to aeroplanes as defined in F44 terminology standard. 1.3 The applicant for a design approval must seek the individual guidance to...

ASTM D6299-26a - Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
July 1, 2026 - ASTM International

1.1 This practice covers information for the design and operation of a program to monitor and control ongoing stability and precision and bias performance of selected analytical measurement systems using a collection of generally accepted statistical quality control (SQC) procedures...

ASTM F3115/F3115M-26a - Standard Specification for Structural Durability for Small Aeroplanes
August 1, 2026 - ASTM International

1.1 This specification addresses the airworthiness requirements related to structural durability for the design of small aeroplanes. The material was developed through open consensus of international experts in general aviation. This information was created by focusing on Levels 1 through 4...

ASTM F877-26 - Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
August 1, 2026 - ASTM International

1.1 This specification covers requirements, test methods, and marking requirements for system components when tested with nominal SDR9 crosslinked polyethylene (PEX) tubing as a system. Systems are intended for 100 psi (0.69 MPa) water service up to and including a maximum...

ASTM B177/B177M-11(2026) - Standard Guide for Engineering Chromium Electroplating
July 1, 2026 - ASTM International

This guide provides information on the deposition of engineering chromium by electroplating. This is sometimes called "functional" or "hard" chromium and is usually applied directly to the basis metal and is usually thicker than decorative deposits. This guide is not intended...

ASTM F3839/F3839M-26 - Standard Practice for Measuring Fire Extinguishing Agent Concentrations In Powerplant Compartments
June 1, 2026 - ASTM International

1.1 This practice covers guidance for fire extinguishing agent concentration testing used in determining the distribution and concentration of fire extinguishing agents when discharged in an aircraft powerplant compartment. This practice is limited to vaporizing liquid fire extinguishing agents or...

ASTM E592-20(2026) - Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Film Radiography of Steel Plates 1 4 to 2 in. (6 to 51 mm) Thick with X-Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60
July 1, 2026 - ASTM International

4.1 A key consideration with any radiographic system is its contrast resolution and spatial resolution capability (that is, sensitivity). The degree of obtainable sensitivity with a given system is dependent upon several radiographic parameters such as source energy level, film...

ASTM F2901-26 - Standard Guide for Neurotoxicity Evaluation and Additional Biocompatibility Assessment for Medical Devices Contacting the Nervous System
May 1, 2026 - ASTM International

1.1 Medical devices may cause adverse effects on the structure and/or function of the nervous system. In this guide, these adverse effects are defined as neurotoxicity. This guide provides background information and recommendations on methods for neurotoxicity testing...

Advertisement