loading
IEEE THE WORLD WIDE WEB - THE WORLD WIDE WEB FOR SCIENTISTS AND ENGINEERS
IEEE
A description is not available for this item.
ASTM F3839/F3839M-26 - Standard Practice for Measuring Fire Extinguishing Agent Concentrations In Powerplant Compartments
June 1, 2026 - ASTM International

1.1 This practice covers guidance for fire extinguishing agent concentration testing used in determining the distribution and concentration of fire extinguishing agents when discharged in an aircraft powerplant compartment. This practice is limited to vaporizing liquid fire extinguishing agents or...

ASTM C140/C140M-26a - Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
June 1, 2026 - ASTM International

1.1 These test methods provide various testing procedures commonly used for evaluating characteristics of concrete masonry units and related concrete units. Methods are provided for sampling, measurement of dimensions, compressive strength, absorption, unit weight (density), moisture content,...

ASTM F3174/F3174M-26 - Standard Specification for Establishing Operating Limitations and Information for Aeroplanes
May 1, 2026 - ASTM International

1.1 This specification covers airworthiness requirements for establishing general limitations and information to be contained in the aeroplane flight manual. This specification specifies what information shall be provided and does not state how such information shall be presented unless this is...

ASTM F3239/F3239M-26 - Standard Specification for Aircraft Electric Propulsion Systems
April 15, 2026 - ASTM International

1.1 This specification addresses airworthiness requirements for the design and installation of electric propulsion systems for aeroplanes. Hybrid-electric propulsion systems are addressed implicitly unless explicitly stated otherwise. This specification was written with the focus on electric...

ASTM D882-26 - Standard Test Method for Tensile Properties of Thin Plastic Sheeting
April 1, 2026 - ASTM International

5.1 Tensile properties determined by this test method are of value for the identification and characterization of materials for control and specification purposes. Tensile properties can vary with specimen thickness, method of preparation, speed of testing, type of grips used, and manner of...

ASTM F3822-26 - Standard Specification for Instructions for Continued Airworthiness
April 1, 2026 - ASTM International

1.1 This specification covers requirements for complying with the 14 CFR Part 23-64,or later/CS-23 Amendment 5, or later, regulations for ICA. This specification replaces the Instructions for Continued Airworthiness and Maintenance that was included in Specification F3117/F3117M. 1.2 An applicant...

ASTM A986/A986M-01(2026) - Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
February 1, 2026 - ASTM International

This test method covers the procedures for the standard practice of performing magnetic particle examination of continuous grain flow crankshaft forgings intended for medium speed diesel engines. Crankshafts shall be divided into four zones of decreasing operational stress, each of which have been...

ASTM E2677-26 - Standard Test Method for Estimating Limits of Detection in Trace Detectors for Explosives and Drugs of Interest
March 1, 2026 - ASTM International

1.1 In harmony with the Joint Committee for Guides in Metrology (JCGM) and detection concepts of the International Union of Pure and Applied Chemistry (IUPAC) (1, 2), this test method uses a series of replicated measurements of an analyte at dosage levels giving instrumental responses that bracket...

ASTM F3805-26 - Standard Specification for Airplane Flight Manual (AFM)
January 1, 2026 - ASTM International

1.1 This specification provides requirements for complying with the 14 CFR Part 23-64/CS-23 Amendment 5 or later regulations for Airplane Flight Manual (AFM). This Specification replaces the AFM requirements originally found in Specification F3117/F3117M. 1.2 An applicant intending to propose this...

ASTM D2628-25 - Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
November 1, 2025 - ASTM International

1.1 This specification covers the material requirements for preformed polychloroprene elastomeric joint seals for concrete pavements. The seal consists of a multiple web design and functions only by compression of the seal between the faces of the joint with the seal folding inward at the...

ASTM D3542-08(2025) - Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges
November 1, 2025 - ASTM International

1.1 This specification covers the material requirements for preformed polychloroprene elastomeric joint seals for bridges. The seal consists of a multiple-web design composed of polychloroprene and functions only by compression of the seal between the faces of the joint with the seal folding...

ASTM C140/C140M-26 - Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
January 1, 2026 - ASTM International

1.1 These test methods provide various testing procedures commonly used for evaluating characteristics of concrete masonry units and related concrete units. Methods are provided for sampling, measurement of dimensions, compressive strength, absorption, unit weight (density), moisture content,...

ASTM F3117/F3117M-25a - Standard Specification for Crew Interface in Aircraft
October 15, 2025 - ASTM International

1.1 This specification covers international standards for the crew interface aspects of airworthiness and design for aircraft. "Crew" includes flight crew and maintenance crew. The material was developed through open consensus of international experts in general aviation. This information was...

ASTM F3703-25 - Standard Specification for Aircraft Inflatable Restraint Systems
October 1, 2025 - ASTM International

1.1 This specification covers minimum requirements for the design of inflatable restraint systems for aircraft. The material was developed through open consensus of international experts in general aviation. This information was created by focusing on Level 1, 2, 3, and 4 Normal Category aeroplanes...

ASTM F3117/F3117M-25 - Standard Specification for Crew Interface in Aircraft
August 15, 2025 - ASTM International

1.1 This specification covers international standards for the crew interface aspects of airworthiness and design for aircraft. "Crew" includes flight crew and maintenance crew. The material was developed through open consensus of international experts in general aviation. This information was...

ASTM F3454-25 - Standard Practice for Alerting Methods in Aircraft
August 1, 2025 - ASTM International

1.1 This practice provides guidance for how an applicant can show compliance to the requirements for Warnings, Cautions, and Advisory Indications to the responsible crewmember. 1.2 An applicant intending to propose this information as Means of Compliance for a design approval must seek guidance...

ASTM F3491-25 - Standard Practice for Enhanced Indication Methods in Aircraft
August 15, 2025 - ASTM International

1.1 This practice provides methods for how Enhanced Indications are provided to the responsible crewmember when an applicant uses these indications in support of compliance with the requirements for Stall Characteristics, Stall Warning, and Spins applicable to Normal Category Aeroplanes, using...

ASTM F3061/F3061M-25 - Standard Specification for Systems and Equipment in Aircraft
August 1, 2025 - ASTM International

1.1 This specification covers the systems and equipment aspects of airworthiness and design for aircraft. The material was developed through open consensus of international experts in general aviation. This information was created by focusing on Level 1, 2, 3, and 4 Normal Category aeroplanes. The...

ASTM C67/C67M-25 - Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
August 1, 2025 - ASTM International

1.1 These test methods cover procedures for the sampling and testing of brick and structural clay tile. Although not necessarily applicable to all types of units, tests include modulus of rupture, compressive strength, absorption, saturation coefficient, effect of freezing and thawing,...

Advertisement