Introduction and Summary Gasoline marketing in this country has undergone significant changes in the last 15 years. In response to these changes, some dealers and other market participants have called for the enactment of divorcement and open supply legislation at both the state and federal levels....
5.1 This practice is intended primarily for the manual ultrasonic scanning of electrofusion joints used in the construction and maintenance of polyethylene piping systems. 5.2 Polyethylene piping has been used instead of steel alloys in the petrochemical, power, water, gas distribution, and...
1.1 These minimum requirements cover regulators used to reduce the pressure of compressed industrial gases from a source or storage cylinder pressure of not more than 5500 psig (37.91 MPa) to the use pressure. 1.2 Regulators covered by these requirements are intended for use with compressed...
This specification covers the requirements and test procedures for materials, dimensions, hydrostatic burst strength, chemical resistance, peeling strength, adhesion strength, and tensile strength properties for cured-in-place (CIP) pipe liners installed into existing metallic gas pipes for...
Purpose This standard specifies requirements for the qualification of suppliers of welding services used in the manufacturer of equipment for the petroleum and natural gas industries. Applicability The requirements of this standard apply to welding operations performed...
1.1 These minimum requirements cover regulators used to reduce the pressure of compressed industrial gases from a source or storage cylinder pressure of not more than 5500 psig (37.91 MPa) to the use pressure. 1.2 Regulators covered by these requirements are intended for use with compressed...
1.1 These minimum requirements cover equipment for manifolding high-pressure gas cylinders to supply gas for various industrial and commercial applications. Cylinders are manifolded for the purpose of centralizing the gas supply, to provide a continuous supply of gas, or...
1.1 These minimum requirements cover equipment for manifolding high-pressure gas cylinders to supply gas for various industrial and commercial applications. Cylinders are manifolded for the purpose of centralizing the gas supply, to provide a continuous supply of gas, or...
Inventories of Natural Gas Liquids and Liquefied Refinery Gases presents data on the inventory levels of ethane, propane, isobutane, normal butane and pentanes plus. These inventories, located at natural gas plants, refineries, bulk terminals and in underground...
Applicability. This code is a safety code that shall apply to the installation of fuel gas piping systems, appliances, equipment, and related accessories as shown in 1.1.1.1(A) through 1.1.1.1(F). (A)* Coverage of piping systems shall extend from the point of delivery to the appliance...
Narrow Your Results