loading
IETF RFC 1073 - Telnet Window Size Option
October 1, 1988 - IETF
A description is not available for this item.
ASTM A740-21(2026) - Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
April 1, 2026 - ASTM International

This specification covers woven or welded galvanized steel wire fabric commercially known as hardware cloth. It is customarily used for window and screen door guards, tree guards, industrial machine guards, sand screens, and grain bins. It serves as a protective screen against rodents and is...

ASTM E283/E283M-26 - Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
April 1, 2026 - ASTM International

1.1 This test method covers a standard laboratory procedure for determining the air leakage rates of exterior windows, skylights, curtain walls, and doors under specified differential pressure conditions across the specimen. The test method described is for tests with constant temperature...

ASTM C1280-25 - Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing
October 1, 2025 - ASTM International

This specification covers the minimum requirements for and the methods of application of gypsum sheathing for use as a substrate for exterior wall cladding. Gypsum sheathing board is a substrate that shall be covered by an exterior cladding or other weather-resistive barrier and is not intended for...

ASTM E1748-25 - Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
August 1, 2025 - ASTM International

5.1 This test method evaluates the engagement between the window and insect screen under static loading for the appropriate specifying authorities or as a design tool for manufacturers. The ability of insect screens to remain engaged depends on the magnitude, duration, repetition of loads,...

ASTM F2469-25 - Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
May 1, 2025 - ASTM International

5.1 The optical angular deviation of flat transparent parts, such as aircraft windshields, canopies, cabin windows, and visors, can be measured using these methods. Angular deviation in a windscreen or visor can cause objects to appear at a location different from where they actually are....

ASTM F3561-25 - Standard Test Method for Forced-Entry-Resistance of Fenestration Systems After Simulated Active Shooter Attack
June 1, 2025 - ASTM International

1.1 This test method sets forth the requirements and testing procedures to test forced-entry-resistant building components, construction components, and specialty security equipment. This test method is intended primarily for manufacturers to test and rate their windows, doors, modular...

ASTM C1363-24 - Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
March 1, 2024 - ASTM International

5.1 A need exists for accurate data on heat transfer through insulated structures at representative test conditions. The data are needed to judge compliance with specifications and regulations, for design guidance, for research evaluations of the effect of changes in materials or constructions, and...

ISA SERVOMOTOR SIZING AND - Servomotor Sizing and Application
January 1, 2012 - ISA
A description is not available for this item.
DIN 680 - Window envelopes - Sizes and position of the window
February 1, 2008 - DIN
A description is not available for this item.
ASTM C1572/C1572M-23 - Standard Guide for Dry Lead Glass and Oil-Filled Lead Glass Radiation Shielding Window Components for Remotely Operated Facilities
May 15, 2023 - ASTM International

4.1 Radiation Shielding Window Components: 4.1.1 Radiation shielding window components operability and long-term integrity are concerns that originate during the design and fabrication sequences. Such concerns can only be addressed, or are most efficiently addressed, during one or the...

ASTM C1280-18(2023) - Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing
October 1, 2023 - ASTM International

This specification covers the minimum requirements for and the methods of application of gypsum sheathing for use as a substrate for exterior wall cladding. Gypsum sheathing board is a substrate that shall be covered by an exterior cladding or other weather-resistive barrier and is not intended for...

DIN 5034-4 - Daylight in interiors - Part 4: Simplified method of determining window sizes in dwellings
September 1, 1994 - DIN
A description is not available for this item.
ASTM E2112-23 - Standard Practice for Installation of Exterior Windows, Doors and Skylights
April 15, 2023 - ASTM International

1.1 This practice covers the installation of fenestration products in new and existing construction. For the purpose of this practice, fenestration products shall be limited to windows, sliding patio-type doors, swinging patio type doors, and skylights, as used primarily in residential and...

ASTM F3561-23 - Standard Test Method for Forced-Entry-Resistance of Fenestration Systems After Simulated Active Shooter Attack
June 15, 2023 - ASTM International

1.1 This test method sets forth the requirements and testing procedures to test forced-entry-resistant building components, construction components, and specialty security equipment. This test method is intended primarily for manufacturers to test and rate their windows, doors, modular...

ASTM E3397-23 - Standard Practice for Resonance Testing Using the Impulse Excitation Method
July 1, 2023 - ASTM International

1.1 This practice covers a general procedure for using the Impulse Excitation Method (IEM) to facilitate natural frequency measurement and detection of defects and material variations in metallic and non-metallic parts. This test method is also known as Impulse Excitation Technique (IET), Acoustic...

ASTM E1765-16(2023) - Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Projects, Products, and Processes
May 1, 2023 - ASTM International

5.1 The AHP method allows you to generate a single measure of desirability for project/product/process alternatives with respect to multiple attributes (qualitative and quantitative). By contrast, life-cycle cost (Practice E917), net savings (Practice E1074), savings-to-investment ratio (Practice...

ASTM E520-08(2023)e1 - Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
April 1, 2023 - ASTM International

This practice describes the photomultiplier properties that are essential to their judicious selection and use of in emission and absorption spectrometry. The properties covered here include structural features, electrical properties, and characteristics involved in precautions and problems. The...

ASTM E520-08(2023) - Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
April 1, 2023 - ASTM International

This practice describes the photomultiplier properties that are essential to their judicious selection and use of in emission and absorption spectrometry. The properties covered here include structural features, electrical properties, and characteristics involved in precautions and problems. The...

ASTM D7178-22 - Standard Practice for Determining the Number of Constrictions "m" of Non-Woven Geotextiles
December 1, 2022 - ASTM International

5.1 This practice provides a calculation method for determining the number of constrictions m of a non-woven geotextile (or of a layer of a composite material). This standard is not applicable to woven geotextiles, knitted geotextiles, heat-bonded geotextiles, or any other type of geosynthetic. 5.2...

Advertisement