loading
MIL-DTL-781 - TERMINAL, WIRE ROPE SWAGING, GENERAL SPECIFICATION FOR
March 10, 2014 - NPFC

This specification covers wire rope terminals designed for attachment to wire rope by swaging.

MIL-T-781 - TERMINAL, WIRE ROPE SWAGING, GENERAL SPECIFICATION FOR
August 22, 1990 - NPFC

This specification covers wire rope terminals designed for attachment to wire rope by swaging.

API SPEC 9A - Specification for Wire Rope
August 1, 2020 - API

This standard specifies the minimum requirements and terms of acceptance for the manufacture and testing of steel wire ropes for the petroleum and natural gas industries. The following products are covered by this specification: - bright- or drawn-galvanized wire rope, -...

QPL-781 - Terminal, Wire Rope Swaging, General Specification for
August 17, 2020 - NPFC

QUALIFIED PRODUCT LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-DTL-781 Terminal, Wire Rope Swaging, General Specification for This list has been prepared for use by or for the Government in the acquisition of products covered by the subject...

API STD 9A - Specification for Wire Rope
March 1, 1968 - API

Coverage. This specification covers (1) bright (uncoated), galvanized, and drawn-galvanized wire rope of various grades and construction, (2) torpedo lines, (3) well-measuring wire, and (4) galvanized wire guy strand. Policy. American Petroleum Institute (API)...

API SPEC 9A CHINESE - Specification for Wire Rope
May 1, 2011 - API
A description is not available for this item.
API SPEC 9A RUSSIAN - Specification for Wire Rope
May 1, 2011 - API
A description is not available for this item.
BS W 14 - Aircraft Control Wire Rope Assemblies - Technical Specification
October 15, 1999 - BSI
A description is not available for this item.
JAN-T-781 - TERMINAL, WIRE ROPE SWAGING, GENERAL SPECIFICATION FOR
NPFC
A description is not available for this item.
BS 462 - Specification for wire rope grips
May 31, 1983 - BSI

Specifies materials, form, dimensions and finish of grips for use with wire ropes of 3 mm to 56 mm diameter.

AASHTO M 277 - Standard Specification for Wire Rope and Sockets for Movable Bridges
January 1, 2006 - AASHTO

This specification covers steel wire rope for use in movable bridges. Both operating and counterweight ropes are included in nominal 6 × 19 rope construction. Suitable sockets are also included. The values stated in SI units are to be regarded as the standard.

ASTM A492-95(2004) - Standard Specification for Stainless Steel Rope Wire
September 1, 2004 - ASTM International

This specification covers the standard for the more commonly used types of round stainless steel wire intended especially for stranding into wire rope. Chemical analysis shall be performed on the steel and the chemical composition shall conform to the required values in...

ASTM A492-95(2000) - Standard Specification for Stainless Steel Rope Wire
January 1, 2000 - ASTM International

1.1 This specification covers the more commonly used types of round stainless steel wire intended especially for stranding into wire rope. 1.2 The values stated in inch-pound units are to be regarded as the standard.

FF-C-450 - CLAMPS, WIRE ROPE
July 13, 2017 - NPFC

This specification covers clamps, wire rope, bolted, and clamps, wire rope, threaded. These clamps are also commercially known as clips, wire rope.

ASTM A492-95(2013) - Standard Specification for Stainless Steel Rope Wire
October 1, 2013 - ASTM International

This specification covers the standard for the more commonly used types of round stainless steel wire intended especially for stranding into wire rope. Chemical analysis shall be performed on the steel and the chemical composition shall conform to the required values in...

ASTM A492-95(2009) - Standard Specification for Stainless Steel Rope Wire
May 1, 2009 - ASTM International

This specification covers the standard for the more commonly used types of round stainless steel wire intended especially for stranding into wire rope. Chemical analysis shall be performed on the steel and the chemical composition shall conform to the required values in...

MIL-DTL-83420 - WIRE ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL, GENERAL SPECIFICATION FOR
January 23, 2017 - NPFC

This specification covers the requirements for carbon steel and corrosion resistant steel aircraft control flexible wire rope. Type I wire rope will be capable of operation within a -65 °F to +250 °F (-54 °C to +121 °C) temperature range in wind, dust, fuel, and...

MIL-W-83420 - WIRE ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL, GENERAL SPECIFICATION FOR
June 6, 1994 - NPFC

This specification covers the requirements for carbon steel and corrosion resistant steel aircraft control flexible wire rope. The wire rope, Type I shall be capable of operation within a −54°C to + 121°C (−65°F to +250°F) temperature range in wind, dust, fuel and...

ASTM A492-95(2019) - Standard Specification for Stainless Steel Rope Wire
March 1, 2019 - ASTM International

This specification covers the standard for the more commonly used types of round stainless steel wire intended especially for stranding into wire rope. Chemical analysis shall be performed on the steel and the chemical composition shall conform to the required values in...

ASTM A492 - Standard Specification for Stainless Steel Rope Wire
January 15, 1995 - ASTM

This specification covers the more commonly used types of round stainless steel wire intended especially for stranding into wire rope. The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI...

Advertisement