In this book, the authors address the wireless communication concepts and terminology that are needed to apply wireless control in the process industry. The control system interfaces and wireless field devices described in this book are based on wireless standards for...
4.1 This guide is intended to apply in conjunction with applicable end-product specific performance or design standard requirements to address the overall system safety of a connected consumer product. Designers and manufacturers of a connected consumer product, with assistance from conformity...
4.1 This section provides a description of the environmental conditions listed in Section 1 and describes the sub-conditions within each condition. Examples provided for many of the conditions and sub-conditions are provided as guidance only. Each of the conditions described should be evaluated and...
This specification describes a medium access control (MAC) and physical layer (PHY) specification for wireless connectivity using dedicated short-range communications (DSRC) services. This standard is based on and refers to IEEE Standards 802.11, Wireless LAN Medium Access Control and...
1.1 This test method covers the determination of relative rotation to evaluate the workability of asphalt mixture during compaction using a wireless particle-size sensor. It is applicable to asphalt mixture being compacted using the Superpave Gyratory Compactor (SGC). 1.2 This test method is...
1.1 The requirements in this Standard cover wireless power transfer (WPT) equipment for transferring power to a stationary electric vehicle. WPT equipment consists of two devices, the power source and a ground assembly, as a minimum. The WPT equipment may also be provided with a third...
1.1 This test method covers the determination of relative rotation to evaluate the workability of asphalt mixture during compaction using a wireless particle-size sensor. It is applicable to asphalt mixture being compacted using the Superpave Gyratory Compactor (SGC). 1.2 This test method is...
Standard for Safety for In-building 2-Way Emergency Radio Communication Enhancement Systems UL 2524 1.1 These requirements cover products (e.g. repeater, transmitter, receiver, signal booster components, remote annunciators and operational consoles, power supply, and battery charging system...
1.1 The requirements in this Standard cover the individual units and equipment that operate within the context of a fundamental hospital signaling nurse call system (NCS). 1.2 A fundamental NCS provides audible and visual communication between patients and staff in a health care facility and...
This SAE Standard specifies the system requirements for vehicle-to-vehicle (V2V) safety system for FHWA vehicle classes 1 (motorcycles and 4 through 13 (non-light-duty), including functional requirements and performance requirements. The system can transmit and receive the SAE J2735-defined Basic...
Narrow Your Results