loading
UFGS-03 51 13 - CEMENTITIOUS WOOD FIBER DECKS
May 1, 2016 - NAVY

NOTE: This guide specification covers the requirements for cementitious wood fiber decks.

ASTM D8484-25 - Standard Specification for Plastic Lumber Materials and Wood-Plastic Composite Materials Used as Exterior Wall Coverings
June 1, 2025 - ASTM International

1.1 This specification is applicable to the use of plastic lumber materials and of wood-plastic composite materials, and no other plastic composite materials, used as exterior wall coverings, as part of an exterior wall assembly. 1.2 This specification is not applicable to the use of plastic...

ASTM D3043-17(2025) - Standard Test Methods for Structural Panels in Flexure
March 15, 2025 - ASTM International

3.1 These methods give the flexural properties, principally strength and stiffness, of structural panels. These properties are of primary importance in most structural uses of panels whether in construction for floors, wall sheathing, roof decking, concrete form, or various space plane...

AASHTO SLWD - Guide Specifications for the Design of Stress-Laminated Wood Decks
April 1, 1991 - AASHTO
A description is not available for this item.
DEF STAN 02-156 - REQUIREMENTS FOR A CAULKING COMPOUND FOR WOOD DECKING
MODUK
A description is not available for this item.
ASTM C317/C317M-24 - Standard Specification for Gypsum Concrete
April 1, 2024 - ASTM International

1.1 This specification covers mill-mixed gypsum concrete, consisting essentially of calcined gypsum and suitable aggregate, requiring the addition of water only at the job site. Gypsum concrete is intended for use in the construction of poured-in-place roof decks or slabs. Two classes, based...

ASTM D7032-21 - Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails
November 1, 2021 - ASTM International

This specification presents the standard procedures for establishing the performance rating of wood-plastic composite (WPC) deck boards and guardrail systems (guards or handrails). The purpose of this specification is to establish the basis for code recognition of these products or...

ASTM E3202-24 - Standard Practice for Specimen Preparation and Mounting of Plastic Composites for Use as Deck Boards, Stair Treads, Guards or Handrails to Assess Surface Burning Characteristics
January 1, 2024 - ASTM International

5.1 Plastic composite materials for use as deck boards, stair treads, guards or handrails are evaluated in accordance with Test Method E84 to comply with building or residential code requirements. This Practice describes specimen mounting procedures for such materials. 5.2 The material to be...

ASTM D8484-23 - Standard Specification for Plastic Lumber Materials and Wood-Plastic Composite Materials Used as Exterior Wall Coverings
May 1, 2023 - ASTM International

1.1 This specification is applicable to the use of plastic lumber materials and of wood-plastic composite materials, and no other plastic composite materials, used as exterior wall coverings, as part of an exterior wall assembly. 1.2 This specification is not applicable to the use of plastic...

ASTM E695-22 - Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
October 1, 2022 - ASTM International

4.1 The procedures outlined will provide data that can be used to evaluate the relative performance of wall, floor, and roof constructions under conditions representative of those sustained in actual service when subjected to impact by a heavy blunt object. See Test Method E661 for evaluation of...

ASTM D7052/D7052M-17(2022) - Standard Test Method for Determining Impact Resistance of New Low Slope Roof Membranes Using Steel Balls (Z8295Z)
December 15, 2022 - ASTM International

1.1 This test method covers the determination of impact resistance of new low slope roof membranes when applied directly over rigid insulation or cover board, or structural concrete, lightweight insulating concrete, gypsum, cementitious wood fiber, or wood roof decks. The...

AWC 2012 WOOD DESIGN PKG - 2012 Wood Design Package
January 1, 2012 - AWC
A description is not available for this item.
ASTM E661-22 - Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
October 1, 2022 - ASTM International

1.1 This test method covers procedures for determining the resistance to deflection and damage of floor and roof sheathing used in site-built construction subjected to concentrated static loads as well as impact loads from nonrigid blunt objects. It is applicable to wood and...

ASTM E2266-22 - Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
May 15, 2022 - ASTM International

1.1 This guide describes design, specification, selection, installation, and inspection of new building wall systems, exterior deck and stair components, doors, windows, penetrations and sealant joints of wood and metal frame buildings, typically four stories or less, to minimize...

ASTM D7787/D7787M-13(2022) - Standard Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings
January 1, 2022 - ASTM International

1.1 This practice offers guidelines for selecting wood or wood composite substrates for the evaluation of specific weathering performance characteristics of architectural coatings such as exterior paints, primers, and deck finishes. 1.2 Procedures include selecting wood...

UL 790 - Standard Test Methods for Fire Tests of Roof Coverings
February 18, 2022 - ULSE

1.1 These requirements cover the measurement of the relative fire characteristics of roof coverings exposed to simulated fire sources originating from outside a building on which the coverings are installed. They are applicable to roof coverings intended for installation on either combustible or...

ASTM E2266-21 - Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
October 1, 2021 - ASTM International

1.1 This guide describes design, specification, selection, installation, and inspection of new building wall systems, exterior deck and stair components, doors, windows, penetrations and sealant joints of wood and metal frame buildings, typically four stories or less, to minimize...

ASTM D7954/D7954M-22a - Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Nondestructive Electrical Impedance Scanners
May 1, 2022 - ASTM International

1.1 This practice applies to techniques that use nondestructive electrical impedance (EI) scanners to locate moisture and evaluate the comparative moisture content within insulated low-slope roofing and waterproofing systems. 1.2 This practice is applicable to roofing and waterproofing systems...

ASTM D7954/D7954M-22 - Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Nondestructive Electrical Impedance Scanners
April 15, 2022 - ASTM International

1.1 This practice applies to techniques that use nondestructive electrical impedance (EI) scanners to locate moisture and evaluate the comparative moisture content within insulated low-slope roofing and waterproofing systems. 1.2 This practice is applicable to roofing and waterproofing systems...

AWC 2005 WOOD DESIGN PKG - 2005 Wood Design Package
January 1, 2005 - AWC
A description is not available for this item.
Advertisement