loading
ASTM E1001-21(2026) - Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves
July 1, 2026 - ASTM International

6.1 This practice provides guidelines for the application of immersed longitudinal wave examination to the detection and quantitative evaluation of discontinuities in materials. 6.2 Although not all requirements of this practice can be applied universally to all examination situations and...

ASTM E2175-01(2026) - Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
May 1, 2026 - ASTM International

4.1 This practice is for the use of manufacturers and users of instruments to measure the appearance of gonioapparent materials, those writing standard specifications for such instruments, and others who wish to specify precisely the geometric conditions of multiangle spectrophotometry. A...

ASTM E2489-21(2026) - Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
May 1, 2026 - ASTM International

5.1 This practice is specifically designed to describe simple robust statistical methods for use in proficiency testing programs. 5.2 Proficiency testing programs can use the methods in this practice for the purpose of comparing testing results obtained from a group of participating laboratories....

ASTM D7740-26 - Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
March 1, 2026 - ASTM International

5.1 Accurate elemental analysis of petroleum products and lubricants is necessary for the determination of chemical properties, which are used to establish compliance with commercial and regulatory specifications. 5.2 Atomic Absorption Spectrometry (AAS) is one of the most widely used analytical...

ASTM D5740-18(2025) - Standard Guide for Writing Material Standards in the Classification D4000 Format
September 1, 2025 - ASTM International

This guide has been prepared to aid in the writing of material standards using the Classification D 4000 format.

ASTM E3405-26 - Standard Practice for Forensic Fiber Training Program
March 1, 2026 - ASTM International

4.1 This practice details a fiber training program that identifies the information and guidelines necessary for preparing a trainee to become a qualified FSP. The trainee is under the direct supervision of a qualified FSP throughout their training. Upon successful completion of the program, a...

ASTM D5746-26 - Standard Classification of Environmental Condition of Property Area Types, Including Explosives Safety for Federally-Owned Real Property
April 1, 2026 - ASTM International

1.1 Purpose-The purpose of this classification is to define eight standard environmental condition of property area types for federally-owned real property with respect to the requirements of the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) of 1980 Section 120(h),...

ASTM D6008-26 - Standard Practice for Determining the Environmental Condition of Federal Property
April 1, 2026 - ASTM International

1.1 Purpose-The purpose of this practice is to define good commercial and customary practice in the United States for assessing the environmental condition of property (ECP) of federal real property. This practice applies to property under consideration for lease, excess and surplus property at...

ASTM A370-26 - Standard Test Methods and Definitions for Mechanical Testing of Steel Products
February 1, 2026 - ASTM International

4.1 The primary use of these test methods is testing to determine the specified mechanical properties of steel, stainless steel, and related alloy products for the evaluation of conformance of such products to a material specification under the jurisdiction of ASTM Committee A01 and its...

ASTM E260-96(2026) - Standard Practice for Packed Column Gas Chromatography
January 1, 2026 - ASTM International

1.1 This practice is intended to serve as a general guide to the application of gas chromatography (GC) with packed columns for the separation and analysis of vaporizable or gaseous organic and inorganic mixtures and as a reference for the writing and reporting of GC methods. Note 1: This...

ASTM F2575-25 - Standard Practice for Language Translation
November 15, 2025 - ASTM International

4.1 This practice is intended to apply to all translation projects regardless of the translation service provider selected (see Section 7). This practice does not apply to spoken or signed interpreting services. For interpreting, please consult Practice F2089, Practice for Language Interpreting. 4...

ASTM F3263-17(2025) - Standard Guide for Packaging Test Method Validation
October 1, 2025 - ASTM International

1.1 This guide provides information to clarify the process of validating packaging test methods specific for an organization utilizing them as well as through inter-laboratory studies (ILS), addressing consensus standards with inter-laboratory studies (ILS) and methods specific to an organization....

ASTM D4753-25 - Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing
July 1, 2025 - ASTM International

4.1 This guide provides those using standards related to soil, rock, and related construction materials, with a means for selecting the balance required for a particular standard. 4.2 This guide provides those writing standards pertaining to soil, rock, and related construction materials...

ASTM D6883/D6883M-25 - Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles
May 15, 2025 - ASTM International

5.1 These guidelines provide procedures for manually collecting gross samples from beneath the exposed surface of coal in railroad cars, barges, trucks, or stockpiles taking into account the wide variety of conditions that may be encountered. The samples are further processed for the laboratory to...

ASTM D1165-25 - Standard Nomenclature of Commercial Hardwoods and Softwoods
April 1, 2025 - ASTM International

1.1 Commercial species group names are listed with common tree and botanical names. Commercial names are representative of commercial practice in the United States and Canada. Some foreign species that are used in the United States and Canada are listed in Appendix X1 with their commercial and...

ASTM F3222-16(2025) - Standard Terminology Relating to F32 Land Search and Rescue Standards and Guides
January 1, 2025 - ASTM International

1.1 This terminology document is a compilation of definitions of terms, abbreviations, and acronyms used in F32 Land Search and Rescue standards and guides, collected in order to provide consistency in communications when used in writing and interpreting the committee's documents. 1.2 This...

ASTM F2027-25 - Standard Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products
January 1, 2025 - ASTM International

1.1 This document provides guidance on writing a materials specification for raw or starting materials intended for use in tissue engineering scaffolds for growth, support, or delivery of cells and/or biomolecules. This guide does not apply to materials that are already in a scaffold form or...

ASTM B374-24 - Standard Terminology Relating to Electroplating
November 1, 2024 - ASTM International

1.1 This document provides definitions used by Committee B08 in the writing of standard guides, test methods, specifications, and practices relating to metallic coatings and processes for depositing these metals. 1.2 These definitions correspond to interpretations as applied to...

ASTM D6883/D6883M-24a - Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles
November 1, 2024 - ASTM International

5.1 These guidelines provide procedures for manually collecting gross samples from beneath the exposed surface of coal in railroad cars, barges, trucks, or stockpiles taking into account the wide variety of conditions that may be encountered. The samples are further processed for the laboratory to...

Advertisement