loading
ASTM D5848-20(2026) - Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
July 1, 2026 - ASTM International

4.1 The determination of the mass per unit area of pile yarn floor covering is useful in quality and cost control during the manufacture of pile floor covering. Both appearance and performance may be affected by changes in mass per unit area. 4.2 In case of a dispute arising from differences...

ASTM D1335-21(2026) - Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings
July 1, 2026 - ASTM International

5.1 Test Method D1335 for tuft bind of pile yarn floor coverings is being used for acceptance testing of commercial shipments. Comparative tests as directed in 5.1.1 may be advisable. 5.1.1 In case of a dispute arising from differences in reported test results using this test method, the...

ASTM D7241-22(2026) - Standard Test Method for Pile Thickness of Finished Multilevel Pile Yarn Floor Covering
July 1, 2026 - ASTM International

5.1 The determination of pile thickness of multilevel pile yarn floor covering is useful in quality and cost control during manufacture of pile yarn floor covering. The appearance and performance may be affected by changes in pile thickness of pile yarn floor coverings. This...

ASTM D6164/D6164M-26 - Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
July 1, 2026 - ASTM International

1.1 This specification covers prefabricated modified bituminous sheet materials reinforced with polyester fabric as the primary reinforcement, with or without granules, which use styrene butadiene styrene (SBS) thermoplastic elastomer as the primary modifier and are intended for use in the...

ASTM D5417-21(2026) - Standard Practice for Operation of the Vettermann Drum Tester
July 1, 2026 - ASTM International

1.1 This practice describes the equipment and operation of the Vettermann drum tester for testing pile yarn floor covering to produce changes in appearance and color due to changes in surface structure by mechanical action. 1.2 This practice is only applicable for use in testing unused pile...

ASTM D8394-21(2026) - Standard Test Method for Automated Measurement of Maturity, Fineness, Ribbon Width, and Micronaire of Cotton Fibers
July 1, 2026 - ASTM International

5.1 Cotton fiber that is on average finer and more mature is more desirable than coarse or immature fiber, although distinction between these qualities cannot be made quickly and accurately using current test methods. Immature fibers break more easily during processing and have a tendency to form...

ASTM D7983-17(2026) - Standard Test Method for Shrinkage of Carpet Backing Fabrics
July 1, 2026 - ASTM International

1.1 This test method covers the procedure for evaluating shrinkage, in both wet and dry conditions, of woven, knitted and nonwoven backing fabrics designed for use in the manufacture of pile yarn floor coverings. Determination of carpet backing shrinkage was previously contained within Test...

ASTM D4034/D4034M-26 - Standard Test Method for Resistance to Yarn Slippage at the Sewn Seam in Woven Upholstery Fabrics
January 1, 2026 - ASTM International

1.1 This test method measures the resistance to slippage of warp yarns over filling yarns, or filling yarns over warp yarns, in woven upholstery fabrics, using a specific standard seam assembly by comparing the differences in test curves from a sewn and unsewn sample....

ASTM D4970/D4970M-22(2026) - Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester
July 1, 2026 - ASTM International

5.1 Acceptance Testing-This method of testing fabrics resistance to pilling is not recommended for acceptance testing. If it is used for acceptance testing, it should be used with caution because interlaboratory data are not available. In some cases the purchaser or supplier may have to test a...

ASTM D1336-07(2025)e1 - Standard Test Method for Distortion of Yarn in Woven Fabrics
November 1, 2025 - ASTM International

1.1 This test method covers the measurement of yarn distortion of one set of yarns over the other in woven cloth following the application of surface friction. This test method especially is applicable to open-weave fabrics, such as nettings, marquisettes, gauzes, chiffons, and...

ASTM D6283-21(2025) - Standard Test Method for Tuft Element Length of Uncoated Pile Yarn Floor Coverings
December 1, 2025 - ASTM International

5.1 The determination of the tuft length of pile yarn floor covering is useful in quality and cost control during the manufacture of pile yarn floor covering. Both appearance and performance can be affected by changes in this characteristic. 5.2 In case there are disputable...

ASTM D4028/D4028M-25 - Standard Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn
November 1, 2025 - ASTM International

This specification covers the general and physical requirements for commercial standard solar screening woven from vinyl-coated fiber glass yarn. The material shall conform to general and physical requirements of this specification. General requirements include workmanship, plasticizers,...

ASTM F2191/F2191M-13(2025) - Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn
October 1, 2025 - ASTM International

1.1 This specification covers staple or continuous filament carbon/graphite yarn valve stem compression packing, suitable for use as end-rings on packing systems for valves. Intended services include steam, hydrocarbons, water, and non-oxidizing chemicals. Where this specification is invoked...

ASTM D7018/D7018M-26 - Standard Terminology Relating to Glass Fiber and Its Products
February 15, 2026 - ASTM International

1.1 This standard is a compilation of terminology developed by Committee D13.18 on Glass Fiber and its Products. 1.2 This terminology is unique to glass fibers, strands, yarns, fabrics, etc. in the glass textile industry. Terms that are generally understood or adequately defined in other...

ASTM D5793-18(2025) - Standard Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings
November 1, 2025 - ASTM International

1.1 This test method describes the measurement of the number of binding sites per unit length or width of machine-made, woven, knitted, and tufted pile yarn floor covering both before and after adhesive backing application. 1.2 The values stated in inch-pound units are to be regarded as...

ASTM D3939/D3939M-26 - Standard Test Method for Snagging Resistance of Fabrics (Mace)
January 1, 2026 - ASTM International

1.1 This test method determines the snagging resistance of a fabric. 1.2 Studies of fabric snagging have shown that this test method is suitable for a range of woven and knitted fabrics made from textured or untextured filament yarns or spun yarns or combinations of these yarns...

ASTM D3107-26 - Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
January 1, 2026 - ASTM International

1.1 These test methods cover the determination of the amount of fabric stretch, fabric growth, and fabric recovery of fabrics woven in whole or in part from stretch yarns after a specified tension and extension. 1.2 These test methods are intended for use with woven fabrics exhibiting high...

ASTM D1909-13(2026) - Standard Tables of Commercial Moisture Regains and Commercial Allowances for Textile Fibers
January 1, 2026 - ASTM International

1.1 These tables list the commercial moisture regains and commercial allowances commonly used for a number of textile fibers. Such moisture regain and allowance values are intended primarily for determining the commercial weight of a specific fiber when the fiber is bought or sold on this basis....

ASTM D7267-19a(2025) - Standard Test Method for Edge Ravel Resistance of Finished Loop Pile, Pile Yarn Floor Covering
September 1, 2025 - ASTM International

1.1 This test method covers the determination of the force required to ravel a straight sewn yarn from the edge of a loop pile, textile floor covering. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI...

ASTM D1907/D1907M-12(2025) - Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
June 1, 2025 - ASTM International

1.1 This test method covers the determination of the linear density of all types of yarn in package form, subject to the limitations of size and stretch given in 1.2 and 1.3. Provision is made for expressing yarn linear density in all the traditional yarn numbering systems. 1.2...

Advertisement