Seats with separate pads and frames PURPOSE This procedure verifies generation of noise from the friction between the pad and the frame during movement of passengers.
This European Standard specifies a method, based on EN ISO 8990 and EN ISO 12567-1, to measure the thermal transmittance of frame and sash components of windows and doors, including mullions and transoms.
Methods for measuring frame size, resolution, radial recording and curved lines, with advice on checking line density and character display and rotation
Methods for measuring frame size, resolution, radial recording and curved lines, with advice on checking line density and character display and rotation.
Some national standard tolerances for cylindrical gears lie in, and even below, the range of instrument measurement uncertainties. This paper presents a concept based on three fundamental goals: reduction of measurement uncertainty, construction of workpiece-like standards, and shortening of the...
General This specification describes frame alignment signal monitoring equipment for 1544 kbit/s frame structures that are in accordance with Recommendation G.704 [1]. This equipment is intended to monitor 12-frame multiframe (superframe format - SF) or 24-frame...
00010c-000000-000000
This document describes the infrared method for measuring the thermal resistance and thermal transmittance of opaque building elements on existing buildings when observing high emissivity diffuse surface using an infrared (IR) camera. This document demonstrates a screening test by...
Purpose. To measure the retention of the power spring cover to the frame of the retractor. This procedure also may be used to test the retention of any protective or functional cover. Applicability. To all safety belt retractor assemblies.
00010b-000000-000000
Purpose and Scope This standard defines speed, accuracy, dependability, and availability parameters that may be used in specifying and assessing the performance of public frame relay data communication services. The defined parameters apply to end-to-end, point-to-point frame relay...
IEC 62906-5-3:2021(E) specifies the standard measurement conditions and measuring methods for determining the parameters of image quality for full-frame laser projection displays integrating the projection devices and screens. The front and rear projection screens are included in this...
This document specifies the standard measurement conditions and measuring methods for determining the parameters of image quality for full-frame laser projection displays integrating the projection devices and screens. The front and rear projection screens are included in this...
These four guides deal with repairs to damage caused by flooding.Part 1 gives advice on cleaning the building in the first few days after the water has receded: such action can reduce the reoccupation time and minimise repairs and replacement.Part 2 deals with the treatment and repair of floors,...
1.1 This test method is a modified version of Test Method E283/E283M, and provides a standard laboratory procedure for determining air leakage separately through the face and sides of exterior windows, curtain walls, and doors under specified differential pressure conditions across the...
ISO 19467:2017 specifies a method to measure the solar heat gain coefficient of complete windows and doors. ISO 19467:2017 applies to windows and doors a) with various types of glazing (glass or plastic; single or multiple glazing; with or without low emissivity coatings, and...
This document specifies a method to measure the solar heat gain coefficient of complete windows and doors. This document applies to windows and doors a) with various types of glazing (glass or plastic; single or multiple glazing; with or without low emissivity coatings, and...
In this book technical and administrative aspects of CO2 emissions are covered. The book addresses especially the chemical and petrochemical industry. For the reader it will deliver answers to the following questions - How can I measure and demonstrate the CO2 emissions linked to my...
This document specifies the standard measurement conditions and measuring methods for determining the parameters of image quality for full-frame laser projection displays integrating the projection devices and screens. The front and rear projection screens are included in this...
1.1 This test method is a modified version of Test Method E283, and provides a standard laboratory procedure for determining air leakage separately through the face and sides of exterior windows, curtain walls, and doors under specified differential pressure conditions across the specimen....