3.1 This practice will enable calibration of oil spill dispersant application equipment and ensure a desired dosage and uniformity across the swath width. 3.2 The data provided by the methods described herein will permit the preparation of a chart relating delivery rate with application vehicle...
3.1 This practice will enable calibration of oil spill dispersant application equipment and ensure a desired dosage and uniformity across the swath width. 3.2 The data provided by the methods described herein will permit the preparation of a chart relating delivery rate with application vehicle...
3.1 This practice will enable calibration of oil spill dispersant application equipment and ensure a desired dosage and uniformity across the swath width. 3.2 The data provided by the methods described herein will permit the preparation of a chart relating delivery rate with application vehicle...
This European Standard specifies all significant hazards, hazardous situations and events relevant to all types of screw extruders for plastics and rubber, when they are used as intended and under conditions of misuse which are foreseeable by the manufacturer (see Clause 4). This European Standard...
This International Standard specifies the profiles, diameter-pitch combinations, basic dimensions, tolerances, limits of size and designation for ISO miniature screw threads with nominal diameters from 0,3 to 1,4 mm. These threads are applicable to timepieces, optical instruments, electrical...
1.1 This practice covers a means of measuring the amount of heat transfer quantitatively through a material or system. 1.2 This practice is similar to the Heat Flow Meter System of Test Method C 518 , but modified to accommodate small test samples of higher thermal conductance. 1.3 The...
1.1 This European Standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during installation , operation and maintenance of permanently installed equipment and systems for the power driven parking of motor vehicles, as defined in...
This practice covers a means of measuring the amount of heat transfer quantitatively through a material or system. This practice is similar to the Heat Flow Meter System of Test Method C518, but modified to accommodate small test samples of higher thermal conductance. The values stated in SI...
1.1 This practice covers a means of measuring the amount of heat transfer quantitatively through a material or system. 1.2 This practice is similar to the Heat Flow Meter System of Method C 518, but modified to accommodate small test samples of higher thermal conductance. 1.3 The values...
This practice will enable calibration of oil spill dispersant application equipment and ensure a desired dosage and uniformity across the swath width. The data provided by the methods described herein will permit the preparation of a chart relating delivery rate with application vehicle speed, flow...
1.1 This practice covers a means of measuring the amount of heat transfer quantitatively through a material or system. 1.2 This practice is similar to the Heat Flow Meter System of Method C518, but modified to accommodate small test samples of higher thermal conductance. 1.3 The values...
Recommendations for systems for plant and machinery with respect to installation practice, system pipework and ancillary equipment. Specific recommendations relating to system design and design of proprietary equipment such as pumps, metering valves, etc, are outside the scope of this...