This document references:
ASME B1.1 - Unified Inch Screw Threads (UN and UNR Thread Form)
Published by ASME
on
January 1, 2019
This Standard specifies the thread form, series, class, allowance, tolerance, and designation for unified screw threads. (In order to emphasize that unified screw threads are based on inch modules,...
This document references:
ASME B16.3 - Malleable Iron Threaded Fittings Classes 150 and 300
Published by ASME
on
November 30, 2016
This Standard covers malleable iron threaded fittings, Classes 150 and 300. It also contains provisions for using steel for caps and couplings in Class 150 for NPS 3⁄8 and smaller. This Standard...
This document references:
B40.100 - Pressure Gauges and Gauge Attachments
Published by ASME
on
December 15, 2022
This Standard covers analog, dial-type gauges, which, using elastic elements, mechanically sense pressure and indicate it by means of a pointer moving over a graduated scale. It also includes the...
This document is referenced by:
UFGS-33 51 15 - NATURAL-GAS / LIQUID PETROLEUM GAS DISTRIBUTION
Published by ARMY
on
November 1, 2008
NOTE: This guide specification covers the requirements for natural or manufactured gas distribution systems designed in accordance with ASME B31.8, or Liquified Petroleum Gas (LPG) Distribution...
This document is referenced by:
UFGS-23 11 25 - FACILITY GAS PIPING
Published by NAVY
on
November 1, 2008
NOTE: This guide specification covers the requirements for low pressure facility gas piping systems conforming to NFPA 54 NFPA 58 for non-industrial uses.
This document is referenced by:
ANSI/FCI 99-2 - Pressure Reducing Regulator Capacity
Published by FCI
on
January 1, 2021
To provide a test methodology for measuring and reporting the capacity of pilot operated and direct acting pressure reducing regulators. PURPOSE This standard creates a guideline for establishing and...