FORD WSK-M4D651-A2
POLYPROPYLENE (PP) COPOLYMER, 10 % MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
active, Most Current
Buy Now
| Organization: | FORD |
| Publication Date: | 20 January 2009 |
| Status: | active |
| Page Count: | 5 |
scope:
The material defined by this specification is a 10% mineral (talc) filled injection molding compound based on polypropylene copolymer with a high melt flow rate for general purpose use.
Document History
FORD WSK-M4D651-A2
January 20, 2009
POLYPROPYLENE (PP) COPOLYMER, 10 % MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
The material defined by this specification is a 10% mineral (talc) filled injection molding compound based on polypropylene copolymer with a high melt flow rate for general purpose use.
October 11, 2007
POLYPROPYLENE (PP) COPOLYMER, 10 % MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
The material defined by this specification is a 10% mineral (talc) filled injection molding compound based on polypropylene copolymer with a high melt flow rate for general purpose use.
October 19, 2005
POLYPROPYLENE (PP) COPOLYMER, 10 % MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
The material defined by this specification is a 10% mineral (talc) filled injection molding compound based on polypropylene copolymer with a high melt flow rate for general purpose use.
July 21, 1994
POLYPROPYLENE (PP) COPOLYMER, 10 % MINERAL FILLED MOLDING COMPOUND
1. SCOPE The material defined by this specification is a 10 % mineral (talc) filled injection molding compound based on polypropylene copolymer with a high melt flow rate for general purpose use.