UNLIMITED FREE
ACCESS TO THE WORLD'S BEST IDEAS

SUBMIT
Already a GlobalSpec user? Log in.

This is embarrasing...

An error occurred while processing the form. Please try again in a few minutes.

Customize Your GlobalSpec Experience

Select Your Free Newsletters

Industry Newsletters

Select Your Free Product Alerts

Finish!
Privacy Policy

This is embarrasing...

An error occurred while processing the form. Please try again in a few minutes.

FORD FLTM BJ 126-01

GREASE STAINING PAINT TEST

active, Most Current
Buy Now
Organization: FORD
Publication Date: 25 July 2001
Status: active
Page Count: 3

Document History

FORD FLTM BJ 126-01
July 25, 2001
GREASE STAINING PAINT TEST
A description is not available for this item.
FLTM BJ 126-01
November 27, 1990
GREASE STAINING PAINT TEST
A description is not available for this item.

References

This document references:
FORD FLTM BI 103-02 - PREPARATION OF PANELS FOR PAINT TESTS
Published by FORD on March 13, 2001
Application This method describes the approved methods of preparing paint panels for laboratory tests of the applied coatings.
This document references:
FORD FLTM BI 112-02 - TUKON HARDNESS OF PAINT
Published by FORD on March 19, 2001
Application This method is used to determine the microhardness of paint and is performed by indenting the paint film with a standard Knoop indenter by application of a 25 g load.
This document is referenced by:
FORD WSB-M1C242-A - GREASE, FLUORINATED ETHER OIL, PTFE THICKENED ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on February 16, 2012
The material defined by this specification is a NLGI 2 grease based on medium viscosity perfluoropolyether oil thickened with PTFE. The lubricant is resistant to nonfluorinated solvents and fuels....
This document is referenced by:
WSS-M1C263-A - LUBRICANT, SILICONE, PTFE/ADDITIVES ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on February 3, 2023
The material defined by this specification is a synthetic lubricating compound consisting of a dimethyl polysiloxane fluid, PTFE, and other additives to provide low friction properties.
This document is referenced by:
FORD WSS-M1C279-A - GREASE, LITHIUM SOAP, SYNTHETIC HYDROCARBON ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on February 16, 2012
The material defined by this specification is grease consisting of a polyalphaolefin base oil thickened with a lithium soap. NLGI grade 2.
This document is referenced by:
ESA-M1C200-A - GREASE, SILICONE, PTFE THICKENED ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on February 3, 2023
The material defined by this specification is a NLGI Grade 2 synthetic lubricating grease consisting of dimethyl polysiloxane fluid thickened with PTFE.
This document is referenced by:
WSS-M1C147-C - GREASE, LITHIUM SOAP, MINERAL OIL, SOLID LUBRICANTS, AXLE ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on October 14, 2022
The material defined by this specification is grease consisting of mineral oil, lithium soap thickener, extreme pressure additives, and solid lubricants. NLGI grade 2.
View Less
View All
Advertisement