CIE 132
Design Methods for Lighting of Roads
active, Most Current
Buy Now
Organization: | CIE |
Publication Date: | 1 January 1999 |
Status: | active |
Page Count: | 54 |
Document History
CIE 132
January 1, 1999
Design Methods for Lighting of Roads
A description is not available for this item.
References
This document is referenced by:
SNZ AS/NZS 1158.1.1 - Lighting for roads and public spaces Part 1.1: Vehicular traffic (Category V) lighting-Performance and design requirements
Published by SNZ
on
September 7, 2005
This Standard specifies performance and design requirements, including requirements relating to the energy efficiency of the lamps and ballasts used, for Category V lighting schemes as described in...
This document is referenced by:
CIE 150 - Guide on the Limitation of the Effects of Obtrusive Light
Published by CIE
on
January 1, 2017
This Guide is an update of Publication 150:2003 which sets out guidelines for assessing the environmental impacts of outdoor lighting and gives recommended limits for relevant lighting parameters to...
This document is referenced by:
BS EN 13032-5 - Light and lighting – Measurement and presentation of photometric data of lamps and luminaires Part 5: Presentation of data for luminaires used for road lighting
Published by BSI
on
November 30, 2018
A description is not available for this item.
This document is referenced by:
EN 13032-5 - Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 5: Presentation of data for luminaires used for road lighting
Published by CEN
on
November 1, 2018
This document defines the presentation of utilances or utilization factors respectively for luminaires used for road lighting.
This document is referenced by:
DIN EN 13032-5 - Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 5: Presentation of data for luminaires used for road lighting
Published by DIN
on
January 1, 2019
This document defines the presentation of utilances or utilization factors respectively for luminaires used for road lighting.
This document is referenced by:
DIN EN 13032-5 - Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 5: Presentation of data for luminaires used for road lighting; German version EN 13032-5:2018
Published by DIN
on
January 1, 2019
Dieses Dokument legt die Darstellung von Utilanzen bzw. Beleuchtungswirkungsgraden von Leuchten für den Einsatz in der Straßenbeleuchtung fest.
This document is referenced by:
SNZ AS/NZS 4282 - Control of the obtrusive effects of outdoor lighting
Published by SNZ
on
February 13, 2019
This Standard sets out requirements for the control of the obtrusive effects of outdoor lighting. It includes limits for the relevant light technical parameters to control these effects. As the...
This document is referenced by:
CIE 234 - A Guide to Urban Lighting Masterplanning
Published by CIE
on
January 1, 2019
The scope of a lighting masterplan is necessarily wide if it is to achieve its objectives and is to become a useful, long term, working document. A typical scope of work will include: • A detailed...
This document is referenced by:
243 - Discomfort Glare in Road Lighting and Vehicle Lighting
Published by CIE
on
January 1, 2021
Limitations to the scope This report describes models for predicting discomfort from glare, focusing on discomfort glare for drivers in the context of road and vehicle lighting, but does not present...
This document is referenced by:
243 - Discomfort Glare in Road Lighting and Vehicle Lighting
Published by CIE
on
January 1, 2021
Limitations to the scope This report describes models for predicting discomfort from glare, focusing on discomfort glare for drivers in the context of road and vehicle lighting, but does not present...