UNLIMITED FREE
ACCESS TO THE WORLD'S BEST IDEAS

SUBMIT
Already a GlobalSpec user? Log in.

This is embarrasing...

An error occurred while processing the form. Please try again in a few minutes.

Customize Your GlobalSpec Experience

Select Your Free Newsletters

Industry Newsletters

Select Your Free Product Alerts

Finish!
Privacy Policy

This is embarrasing...

An error occurred while processing the form. Please try again in a few minutes.

FORD FLTM BP 108-06

COMPRESSION SET OF COOLANT HOSES

active, Most Current
Buy Now
Organization: FORD
Publication Date: 23 August 2001
Status: active
Page Count: 6

Document History

FORD FLTM BP 108-06
August 23, 2001
COMPRESSION SET OF COOLANT HOSES
A description is not available for this item.
FLTM BP 108-06
February 12, 1990
COMPRESSION SET OF COOLANT HOSES
A description is not available for this item.

References

This document references:
ASTM D3767 - Standard Practice for Rubber—Measurement of Dimensions
Published by ASTM on December 1, 2003
This practice is intended for use in determining the geometrical dimensions of rubber products and specimens for physical tests. This practice describes procedures for determining length, width,...
This document references:
ASTM E145 - Standard Specification for Gravity-Convection and Forced-Ventilation Ovens
Published by ASTM on March 1, 2019
This specification covers the performance requirements for general-purpose air ovens ordinarily used in testing operations, which have a testing chamber up to 0.6 m3 (25 ft3) in volume. It is...
This document is referenced by:
FORD WSS-M96D26-A4 - HOSE, TRANSMISSION OIL COOLER ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on June 24, 2010
The material and construction defined by this specification is a low pressure transmission oil cooler hose with low insertion efforts composed of a chlorosulfonated polyethylene (CSM) tube and a...
This document is referenced by:
FORD WSD-M96D40-A1 - TUBE, EPDM RUBBER, ENGINE COOLANT, LOW COMPRESSION SET ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on February 1, 2019
This specification defines unreinforced, engine coolant tubing.
This document is referenced by:
FORD WSD-M96D40-A2 - TUBE, EPDM RUBBER, ENGINE COOLANT, LOW COMPRESSION SET, LOW EXTRACTABLE ZINC ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on May 3, 2012
This specification defines unreinforced, engine coolant tubing.
This document is referenced by:
FORD WSE-M96D34-A1 - HOSE, EPDM RUBBER, PARA-ARAMID FIBERS REINFORCED, ENGINE COOLANT AND ELECTRO-CHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on September 13, 2017
These specifications define long life, high pressure EPDM rubber coolant hoses internally reinforced with a variety of synthetic fibers. All these hoses are resistant to electrochemical (striations)...
This document is referenced by:
WSE-M96D34-A2 - HOSE, EPDM RUBBER, META-ARAMID FIBERS REINFORCED, ENGINE COOLANT AND ELECTRO-CHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***
Published by FORD on February 8, 2022
These specifications define long life, high pressure EPDM rubber coolant hoses internally reinforced with a variety of synthetic fibers. All these hoses are resistant to electrochemical (striations)...
View Less
View All
Advertisement