NEN-EN 10130
Cold-rolled low carbon steel flat products for cold forming - Technical delivery conditions
inactive
| Organization: | NEN |
| Publication Date: | 1 September 1998 |
| Status: | inactive |
| Page Count: | 19 |
| ICS Code (Flat steel products and semi-products): | 77.140.50 |
scope:
This European Standard applies to cold-rolled non-coated low carbon steel flat products in roled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm, and unless otherwise agreed at the time of the order, less than 3 mm, delivered in sheet, coil, slit coil or cut lengths obtained from slit coil or sheet.
Document History
January 1, 2007
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
This European Standard applies to cold rolled uncoated low carbon steel flat products in rolled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm and, unless...
January 1, 2007
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
This European Standard applies to cold rolled uncoated low carbon steel flat products in rolled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm and, unless...
August 1, 2004
Cold-rolled low carbon steel flat products for cold forming - Technical delivery conditions
This European Standard applies to cold rolled uncoated low carbon steel flat products in rolled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm and, unless...
September 1, 1998
Cold-rolled low carbon steel flat products for cold forming - Technical delivery conditions
This European Standard applies to cold-rolled non-coated low carbon steel flat products in roled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm, and unless...
NEN-EN 10130
September 1, 1998
Cold-rolled low carbon steel flat products for cold forming - Technical delivery conditions
This European Standard applies to cold-rolled non-coated low carbon steel flat products in roled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm, and unless...