NEN-ISO 6953-1
Pneumatic fluid power - Air line pressure regulators - Part 1: Main characteristics to be included in commercial literature and specific requirements
inactive
| Organization: | NEN |
| Publication Date: | 1 December 1995 |
| Status: | inactive |
| ICS Code (Other fluid power system components): | 23.100.99 |
scope:
This part specifies which characteristics of pressure regulators are to be included in the manufacturers' literature. Specifies some requirements which the regulators must meet. The dimensions are illustrated in figure 1; figure 2 show the air flow rate versus outlet pressure Regulation characteristics are shown in figure 3, and figure 4 contains the relief flow characteristics.
Document History
March 1, 2015
Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements
NEN-ISO 6953-1 specifies which characteristics of compressed air pressure regulators are to be included in literature from their suppliers. It also applies to filter-regulators. This part of ISO 6953...
April 1, 2006
Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements
A description is not available for this item.
November 1, 2000
Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements
Specifies the characteristics of compressed air pressure regulators to be included literature from their suppliers. It also applies to filter-regulators. It also specifies the product marking...
NEN-ISO 6953-1
December 1, 1995
Pneumatic fluid power - Air line pressure regulators - Part 1: Main characteristics to be included in commercial literature and specific requirements
This part specifies which characteristics of pressure regulators are to be included in the manufacturers' literature. Specifies some requirements which the regulators must meet. The dimensions are...