GMW3025
Sag and Slide Test
active, Most Current
Buy Now
| Organization: | GMW |
| Publication Date: | 1 June 2020 |
| Status: | active |
| Page Count: | 4 |
scope:
Purpose.
The test is used to determine the no-sag properties of sealing compounds, such as seam sealing compounds, underseal, etc., and adhesives on vertical surfaces.
Sliding: The bead moving down the panel from the point at which it was applied to the substrate.
Sagging: The deformation of the bead from original shape.
Applicability.
Adhesives/Sealers.
Remarks.
None.
Document History
GMW3025
June 1, 2020
Sag and Slide Test
Purpose.
The test is used to determine the no-sag properties of sealing compounds, such as seam sealing compounds, underseal, etc., and adhesives on vertical surfaces.
Sliding: The bead moving down...
May 1, 2015
Sag and Slide Test
Introduction
Note: Nothing in this standard supercedes applicable laws and regulations.
Note: In the event of conflict between the English and domestic language, the English language shall take...
October 1, 2010
Sag and Slide Test
Note: Nothing in this standard supercedes applicable laws and regulations.
Note: In the event of conflict between the English and domestic language, the English language shall take precedence....
June 1, 2000
Sag and Slide Test
The test is used to determine the no-sag properties of sealing compounds such as seam sealing compounds, flange sealing compound, underseal, adhesive etc. on perpendicular surfaces.
Sliding is...
February 1, 2000
Sag and Slide Test
I Scope Note: Nothing in the specification, however, supersedes applicable lawsand regulations unless a specific exemption has been obtained.