This document references:
ACI 347.3R - Guide to Formed Concrete Surfaces
Published by ACI
on
January 1, 2013
INTRODUCTION The scope of this guide is to solve a lack of uniformity in the appearance criteria of concrete surfaces, provide definitions for the various levels of formed concrete surfaces, and give...
This document references:
PRC-334.1 - Concrete Shell Structures— Guide
Published by ACI
on
June 1, 2022
Design recommendations in this guide are for thin shell portions of concrete structures, unless otherwise stated. ACI 318.2 and all applicable sections of ACI 318 or ACI 350 should be followed in the...
This document references:
ACI 224R - Control of Cracking in Concrete Structures
Published by ACI
on
March 24, 2008
Cracks in concrete structures can indicate major structural problems and detract from the appearance of monolithic construction. There are many specific causes of cracking. This report presents the...
This document references:
301 - Specifications for Concrete Construction (ACI 301-20)
Published by ACI
on
September 1, 2020
This Specification covers construction of cast-inplace concrete, architectural concrete, lightweight concrete, mass concrete, post-tensioned concrete, shrinkage-compensating concrete for interior...
This document references:
ACI 303R - Guide to Cast-in-Place Architectural Concrete Practice
Published by ACI
on
June 1, 2012
INTRODUCTION This guide presents recommendations for cast-in-place architectural concrete that is exposed to view. Architectural concrete requires special care in the selection of concrete materials,...
This document references:
PRC-334.1 - Concrete Shell Structures— Guide
Published by ACI
on
June 1, 2022
Design recommendations in this guide are for thin shell portions of concrete structures, unless otherwise stated. ACI 318.2 and all applicable sections of ACI 318 or ACI 350 should be followed in the...
This document references:
ACI 347.3R - Guide to Formed Concrete Surfaces
Published by ACI
on
January 1, 2013
INTRODUCTION The scope of this guide is to solve a lack of uniformity in the appearance criteria of concrete surfaces, provide definitions for the various levels of formed concrete surfaces, and give...