DNV-RU-YACHT PART 3 CHAPTER 4
Part 3 Hull - Chapter 4 Metallic hull girder strength and local scantlings
active, Most Current
| Publication Date: | 1 July 2022 |
| Status: | active |
| Page Count: | 167 |
scope:
This section specifies the criteria for calculating the hull girder strength characteristics, in association with the hull girder loads specified in Ch.3 Sec.3.
Sec.3 specifies the hull girder design stresses to be used for the evaluation of the scantling of structural members according to Sec.4 subject to local load and hull girder load combination.
Document History
DNV-RU-YACHT PART 3 CHAPTER 4
July 1, 2022
Part 3 Hull - Chapter 4 Metallic hull girder strength and local scantlings
This section specifies the criteria for calculating the hull girder strength characteristics, in association with the hull girder loads specified in Ch.3 Sec.3.
Sec.3 specifies the hull girder...
August 1, 2021
Part 3 Hull - Chapter 4 Metallic hull girder strength and local scantlings
This section specifies the criteria for calculating the hull girder strength characteristics, in association with the hull girder loads specified in Ch.3 Sec.3.
Sec.3 specifies the hull girder...
January 1, 2021
Part 3 Hull Chapter 4 Metallic hull girder strength and local scantlings
This section specifies the criteria for calculating the hull girder strength characteristics, in association with the hull girder loads specified in Ch.3 Sec.3.
Sec.3 specifies the hull girder...
October 1, 2016
Part 3 Hull - Chapter 4 Metallic hull girder strength and local scantlings
Applicability
This chapter provides the scantling design criteria for the following craft built from metallic materials:
— sailing yachts
— motor yachts
— high speed yachts
— multihulls
as per...
October 1, 2016
Part 3 Hull - Chapter 4 Metallic hull girder strength and local scantlings
FOREWORD
DNV GL rules for classification contain procedural and technical requirements related to obtaining and retaining a class certificate. The rules represent all requirements adopted by the...
October 1, 2016
Part 3 Hull - Chapter 4 Metallic hull girder strength and local scantlings
Applicability
This chapter provides the scantling design criteria for the following craft built from metallic materials:
— sailing yachts
— motor yachts
— high speed yachts
— multihulls, as per...
December 1, 2015
Part 3 Hull - Chapter 4 Metallic hull girder strength and local scantlings
Applicability
This chapter provides the scantling design criteria for the following craft built from metallic materials:
— Displacement Motor Yachts
— High Speed Motor Yachts
— Heavy...