GMNA - 9984482
Purge Solvent/Cap Cleaner for Waterborne Basecoat
inactive
Buy Now
| Organization: | GMNA |
| Publication Date: | 1 June 2001 |
| Status: | inactive |
| Page Count: | 7 |
scope:
1 Scope
1.1 Material Description. This specification defines the basic physical, chemical and performance requirements of waterborne solutions used for both purge of waterborne basecoats and for cap cleaner of equipment used to spray waterborne basecoat. These materials may be supplied as concentrates, but requirements are based on the ready-for-use mixtures in de-ionized water.
Document History
October 1, 2021
Purge Solvent/Cap Cleaner for Waterborne Enamel
Note: Nothing in this standard supercedes applicable laws and regulations.
Note: In the event of conflict between the English and domestic language, the English language shall take precedence....
April 1, 2015
Purge Solvent/Cap Cleaner for Waterborne Enamel
Material Description. This specification defines the basic physical, chemical and performance requirements of waterborne solutions used for both purge of waterborne paint materials and for cap...
9984482
June 1, 2001
Purge Solvent/Cap Cleaner for Waterborne Basecoat
1 Scope 1.1 Material Description. This specification defines the basic physical, chemical and performance requirements of waterborne solutions used for both purge of waterborne basecoats and for cap...
January 1, 1990
Purge Thinner - for Waterborne Enamels
1 SCOPE. This specification covers the basic physical, chemical and performance requirements of purging solvents for use with waterborne enamels. .The.se materials shall effkiently clean all residual...