ISO 16136
Industrial valves Butterfly valves of thermoplastics materials
active, Most Current
Buy Now
Organization: | ISO |
Publication Date: | 15 March 2006 |
Status: | active |
Page Count: | 20 |
ICS Code (Other valves): | 23.060.99 |
Document History
July 1, 2019
Industrial valves - Butterfly valves of thermoplastics materials AMENDMENT 1
A description is not available for this item.
ISO 16136
March 15, 2006
Industrial valves Butterfly valves of thermoplastics materials
A description is not available for this item.
References
This document references:
ISO 15494 - Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PERT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system
Published by ISO
on
October 1, 2015
This International Standard specifies the characteristics and requirements for components such as pipes, fittings, and valves made from one of the following materials intended to be used for...
This document references:
ISO 12162 - Thermoplastics materials for pipes and fittings for pressure applications — Classification, designation and design coefficient
Published by ISO
on
November 15, 2009
This International Standard establishes the classification of thermoplastics materials in pipe form and specifies the material designation. It also specifies a method for calculating the design...
This document references:
ISO 1167-1 - Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method
Published by ISO
on
February 1, 2006
This part of ISO 1167 specifies a general test method for determining the resistance to internal hydrostatic pressure at a given temperature of thermoplastics pipes, fittings and piping systems for...
This document references:
ISO 898-1 - Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
Published by ISO
on
January 15, 2013
This part of ISO 898 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C....
This document references:
ISO 15494 - Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PERT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system
Published by ISO
on
October 1, 2015
This International Standard specifies the characteristics and requirements for components such as pipes, fittings, and valves made from one of the following materials intended to be used for...
This document references:
ISO 15493 - Plastics piping systems for industrial applications - Acrylonitrile-butadienestyrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series
Published by ISO
on
April 15, 2003
A description is not available for this item.
This document is referenced by:
SNZ AS/NZS 4645.3 - Gas distribution networks Part 3: Plastics pipe systems
Published by SNZ
on
February 28, 2018
This Standard specifies materials, design, construction, installation, testing and maintenance requirements for below ground plastics gas distribution networks for use in conjunction with AS/NZS...
This document is referenced by:
PREN 15014 - Draft BS EN 15014 Plastics piping systems - Buried and above ground piping components for water under pressure - Requirements and test/assessment methods for pipes and fittings
Published by BSI
on
April 29, 2014
A description is not available for this item.
This document is referenced by:
BS EN ISO 1452-4 - Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) Part 4: Valves
Published by BSI
on
January 31, 2010
A description is not available for this item.
This document is referenced by:
ISO 1452-4 - Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 4: Valves
Published by ISO
on
December 1, 2009
This part of ISO 1452 specifies the characteristics of valves made from unplasticized poly(vinyl chloride) (PVC-U) for piping systems intended for water supply and for buried and above-ground...
This document is referenced by:
DIN EN ISO 10931 - Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005 + Amd 1:2015); German version EN ISO 10931:2005 + A1:2015
Published by DIN
on
November 1, 2015
Diese Internationale Norm legt die Eigenschaften und Anforderungen an Rohrleitungsteile wie Rohre, Formstücke und Armaturen aus Polyvinylidenfluorid (PVDF) fest, die für die Anwendung in oberirdisch...