GMW3305
Hexagon Screw and Washer Assemblies with Conical Washer and Pilot Point
inactive
Buy Now
| Organization: | GMW |
| Publication Date: | 1 June 2001 |
| Status: | inactive |
| Page Count: | 5 |
scope:
1 Scope
This standard specifies the characteristics of hexagon screw and washer assemblies with conical washers and pilot point. The screw in this standard is based on ISO 4017 and ISO 10644 where applicable. The hole in the washer is based on ISO 10673.
Document History
April 1, 2011
Hexagon Screw and Washer Assemblies With Conical Washer and Pilot Point Product Grade A
This standard specifies the characteristics of hexagon screw and washer assemblies with conical washers and pilot point. The screw in this standard is based on ISO 4017 and ISO 10644 where...
GMW3305
June 1, 2001
Hexagon Screw and Washer Assemblies with Conical Washer and Pilot Point
1 Scope This standard specifies the characteristics of hexagon screw and washer assemblies with conical washers and pilot point. The screw in this standard is based on ISO 4017 and ISO 10644 where...
June 1, 2000
Hexagon Screw and Washer Assemblies with Conical Washer and Pilot Point
1 Scope This standard specifies the characteristics of hexagon screw and washer assemblies with conical washers and pilot point. The screw in this standard is based on ISO 4017 and ISO 10644 where...