CEI - EN 60695-2-13/A1
Fire hazard testing Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
inactive
| Organization: | CEI |
| Publication Date: | 1 December 2014 |
| Status: | inactive |
| Page Count: | 12 |
| ICS Code (Ignitability and burning behaviour of materials and products): | 13.220.40 |
| ICS Code (Electrical engineering in general): | 29.020 |
scope:
b) sustained flaming combustion does not occur for a time longer than 5 s for any single flame event and the specimen is not totally consumed.
Document History
January 1, 2023
Fire hazard testing Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
A description is not available for this item.
March 1, 2015
Fire hazard testing Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
Replace item b) of the second paragraph of the Scope by the following:
b) sustained flaming combustion does not occur for a time longer than 5 s for any single flame event and the specimen is not...
EN 60695-2-13/A1
December 1, 2014
Fire hazard testing Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
b) sustained flaming combustion does not occur for a time longer than 5 s for any single flame event and the specimen is not totally consumed.
July 1, 2013
Fire hazard testing Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
This part of IEC 60695 specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for ignitability testing to...
January 1, 2012
Fire hazard testing Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
Questa Parte della EN/IEC 60695 specifica i particolari relativi alla prova al filo incandescente da applicare a provini di materiali isolanti elettrici solidi o ad altri materiali solidi per le...
August 1, 2001
Fire hazard testing - Part 2-13: Glowing/hot wire based tests methods - Glow-wire ignitability test method for materials
La presente Norma specifica i particolari relativi alla prova al filo incandescente da applicare a provini di materiali isolanti elettrici solidi o ad altri materiali solidi per le prove di...