This document references:
530.1 - Specification for Masonry Structures
Published by ACI
on
January 1, 2005
Summary A. This Specification covers requirements for materials and construction of masonry structures. SI values shown in parentheses are provided for information only and are not part of this...
This document references:
AISC 341 - Seismic Provisions for Structural Steel Buildings
Published by AISC
on
June 22, 2010
The Seismic Provisions for Structural Steel Buildings, hereafter referred to as these Provisions, shall govern the design, fabrication and erection of structural steel members and connections in the...
This document references:
360 - Specification for Structural Steel Buildings
Published by AISC
on
August 1, 2022
The Specification for Structural Steel Buildings (ANSI/AISC 360), hereafter referred to as this Specification, shall apply to the design, fabrication, erection, and quality of the structural steel...
This document references:
41-23 - Seismic Evaluation and Retrofit of Existing Buildings
Published by ASCE
on
January 1, 2023
This standard, Seismic Evaluation and Retrofit of Existing Buildings, referred to herein as “this standard,” specifies provisions for the seismic evaluation and retrofit of buildings. Seismic...
This document references:
UFC 3-301-01 - STRUCTURAL ENGINEERING
Published by UFC
on
April 11, 2023
PURPOSE AND SCOPE. This Unified Facilities Criteria (UFC) provides requirements for structures designed and constructed for the Department of Defense (DoD). These technical requirements are based on...
This document references:
UFC 4-010-01 - DoD MINIMUM ANTITERRORISM STANDARDS FOR BUILDINGS
Published by UFC
on
December 12, 2018
PURPOSE AND SCOPE. The purpose of this standard is to establish minimum engineering standards that incorporate antiterrorism (AT) based mitigating measures where no identified threat or level of...
This document is referenced by:
UFC FC 4-721-02F - AIR FORCE LEVEL I CONFINEMENT FACILITY
Published by DOD
on
April 1, 2015
Purpose This standard facility prototype design was developed to assist Air Force programmers in preparing and validating DD Form 1391 requirements and to assist architect-engineer (A-E) design...
This document is referenced by:
UFC FC 4-179-03F - AIR FORCE INDOOR SMALL ARMS FIRING RANGE
Published by UFC
on
April 1, 2015
Purpose. This standard facility prototype design criteria was developed to assist Air Force programmers to prepare and validate DD Form 1391 requirements and to assist A-E design professionals with...
This document is referenced by:
UFC 4-510-01 - DESIGN: \1\MEDICAL MILITARY \1\FACILITIES
Published by DOD
on
November 1, 2012
PURPOSE AND SCOPE. This Unified Facilities Criteria (UFC) 4-510-01 provides mandatory policies and procedures for programming, planning, design, and construction throughout the lifecycle of Military...