loading
ASTM G136-03(2023)e1 - Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
July 1, 2023 - ASTM International

5.1 This practice is suitable for the determination of extractable substances that may be found in materials used in systems or components requiring a high level of cleanliness, such as oxygen systems. Soft goods, such as seals and valve seats, may be tested as received. Gloves and wipes, or...

UL 486G - Sealed Twist-On Connecting Devices
July 22, 2024 - ULSE

1.1 The wire connectors covered by these requirements are intended for use with copper conductor in accordance with installations covered by the National Electrical Code, NFPA 70; the Canadian Electrical Code, Part I, C22.1; and NOM 001 SEDE, Standard for Electrical Installations. The requirements...

FORD WSB-M3G210-A - TAPE, ELASTOMERIC, PRESSURE SENSITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
December 10, 2020 - FORD

The material defined by this specification is an elastomeric (butyl) extruded, pressure sensitive tape. The adhesive surface is protected on one side with a removable release liner.

API RP 17G3 - Design of Subsea Well Intervention Systems Using Non-ferrous Alloys
February 1, 2021 - API

This recommended practice provides design guidelines for the use of non-ferrous materials in subsea intervention systems and components.

FORD WSB-M2G234-C3 - PRIMER, METAL, FOR ONE COMPONENT FASTER -- ***TO BE USED WITH FORD WSS-M99P1111-A***
January 8, 2021 - FORD

The material defined by these specifications are highly reactive moisture sensitive solvent/resin blend adhesion promoting primers.

AMS6459G - Steel, Welding Wire, 1.0Cr - 1.0Mo - 0.12V (0.18 - 0.23C), Vacuum Melted, Environment Controlled Packaging
December 26, 2023 - SAE International

This specification covers a low-alloy steel in the form of welding wire.

NR/L3/ELP/27240/NR/D/C34G - Isolation of DC Voltage Monitoring Panels Installed at Ludgate Cellars Substation
December 5, 2020 - NR

Includes: This document sets out the instructions to be carried out in connection with the issue and cancellation of Certificate of Isolation for the DC Voltage Monitoring (VM) panels installed at Ludgate Cellars substation (see figure 1) to enable maintenance work / testing to be carried out....

AMS5674G - Steel, Corrosion- and Heat-Resistant, Wire 18Cr - 11.5Ni - 0.70Cb (Nb) (347) Solution Heat Treated
November 20, 2023 - SAE International

This specification covers a corrosion- and heat-resistant steel in the form of wire.

FORD WSE-M3G194-A - LABEL, POLYESTER, PRESSURE SENSITIVE, ENGINE CODE ***TO BE USED WITH FORD WSS-M99P1111-A***
June 23, 2020 - FORD

The material defined by this specification is a polyester film with a pressure sensitive adhesive protected by a suitable release liner.

ITU-T G.8273.3 - Timing characteristics of telecom transparent clocks for use with full timing support from the network
October 1, 2020 - ITU-T

This Recommendation specifies minimum requirements for time and phase synchronization devices used in synchronizing network equipment, which operates in the network architecture as defined in [ITU-T G.8271] and [ITU-T G.8275]. It supports time and/or phase synchronization distribution for...

AMS6468G - Steel, Welding Wire, 1.0Cr - 10Ni - 3.8Co - 0.45Mo - 0.08V (0.14 - 0.17C), Vacuum Melted, Environment Controlled Packaging
November 10, 2023 - SAE International

This specification covers an alloy steel in the form of welding wire.

AMS5354G - Steel, Corrosion and Heat Resistant, Investment Castings 13Cr - 2.0Ni - 3.0W Hardened and Tempered to 32 - 38 HRC
November 3, 2023 - SAE International

This specification covers a corrosion and moderate heat resistant steel in the form of investment castings.

AMS5360G - Steel, Corrosion and Heat-Resistant, Investment Castings 17Cr - 13Ni - 1.9Mo Solution Heat Treated
November 3, 2023 - SAE International

This specification covers a corrosion and heat-resistant steel in the form of investment castings.

AMS5838G - Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 65Ni - 16Cr - 15Mo - 0.30Al - 0.06La (S)
October 6, 2023 - SAE International

This specification covers a corrosion- and heat-resistant nickel alloy in the form of welding wire.

ASTM G62-23 - Standard Test Methods for Holiday Detection of Coatings used to Protect Pipelines
October 1, 2023 - ASTM International

5.1 Method A-Low voltage holiday detection is used to locate holidays and pinholes in thin-film coatings (up to 0.508?mm (20?mils) using a sponge wetted with tap water (and a wetting agent for coatings thicker than 10?mils). The water carries the current from the electrode through the holiday to...

AMS4069G - Aluminum Alloy, Drawn, Round Seamless Tubing Close Tolerance 2.5Mg - 0.25Cr (5052-O) Annealed
September 21, 2023 - SAE International

This specification covers an aluminum alloy in the form of drawn, round seamless tubing 0.010 to 0.450 inch (0.25 to 11.43 mm), inclusive, in wall thickness (see 8.5 ).

AMS5773G - Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings or Rings 15Cr - 6.5Ni - 0.75Mo - 0.30Cb (Nb) - 1.5Cu Consumable Electrode Remelted, Solution Heat Treated, Precipitation Hardenable
September 7, 2023 - SAE International

This specification covers a premium aircraft-quality, corrosion-resistant steel in the form of bars, wire, forgings, mechanical tubing, and flash welded rings in the solution heat-treated condition, 12 inches (305 mm) and under in nominal diameter, thickness or, for hexagons, least distance between...

AMS4342G - Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged
September 5, 2023 - SAE International

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles 5.000 inches (127.00 mm) and under in nominal diameter or thickness and 32 square inches (206 cm 2x) and under in cross-sectional area, and tubing 3.000 inches (76.20 mm) and under in wall thickness and...

AMS6454G - Steel, Sheet, Strip, and Plate 1.8Ni - 0.80Cr - 0.25Mo (0.38 - 0.43C) (SAE 4340) Vacuum Consumable Electrode Remelted
August 30, 2023 - SAE International

This specification covers a premium-aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.

Advertisement