loading
IIAR CO2 HANDBOOK - THE CO2 HANDBOOK
IIAR
A description is not available for this item.
UOP603 - Trace CO and CO2 in Hydrogen and Light Gaseous Hydrocarbons by Gas Chromatography
January 1, 2018 - ASTM

This method is for determining low concentrations (0.2 to 500 mol-ppm) of carbon monoxide (CO) and carbon dioxide (CO2) in high purity hydrogen, methane and other gas-phase samples. The lower limit of quantitation for CO and CO2 in samples containing high concentrations...

ASTM UOP603-18 - Trace CO and CO2 in Hydrogen and Light Gaseous Hydrocarbons by Gas Chromatography
November 1, 2018 - ASTM International

This method is for determining low concentrations (0.2 to 500 mol-ppm) of carbon monoxide (CO) and carbon dioxide (CO2) in high purity hydrogen, methane and other gas-phase samples. The lower limit of quantitation for CO and CO2 in samples containing high concentrations...

ASTM UOP603-13 - Trace CO and CO2 in Hydrogen and Light Gaseous Hydrocarbons by GC
February 1, 2013 - ASTM International

This method is for determining low concentrations (0.2 to 500 mol-ppm) of carbon monoxide (CO) and carbon dioxide (CO2) in high purity hydrogen, methane and other gas-phase samples. The lower limit of quantitation for CO and CO2 in samples containing high concentrations...

ASTM UOP603-12 - Trace CO and CO2 in Hydrogen and Light Gaseous Hydrocarbons by GC
October 1, 2012 - ASTM International

This method is for determining low concentrations (0.2 to 500 mol-ppm) of carbon monoxide (CO) and carbon dioxide (CO2) in high purity hydrogen, methane and other gas-phase samples. The lower limit of quantitation for CO and CO2 in samples containing high concentrations...

Methane and its Derivatives
October 18, 1996 - CRC

Covers the chemistry, process chemistry, technology, engineering, and economics of methane conversion, including its environmental impact and commercial exploitation. Begins with methane's availability and increasing importance as an environmentally acceptable natural resource alternative...

MIL-PRF-32207 - PROPELLANT, METHANE
NPFC
A description is not available for this item.
J1151_201109 - Methane Measurement Using Gas Chromatography
September 6, 2011 - SAE International

This SAE Recommended Practice describes instrumentation for determining the amount of methane in air and exhaust gas.

J1151A_197907 - METHANE MEASUREMENT USING GAS CHROMATOGRAPHY
July 1, 1979 - SAE International

This SAE Recommended Practice describes instrumentation for determining the amount of methane in air and exhaust gas.

ASTM D3956-12(2018) - Standard Specification for Methane Thermophysical Property Tables
April 1, 2018 - ASTM International

1.1 The thermophysical property tables for methane are for use in the calculation of the pressure-volume-temperature (PVT), thermodynamic, and transport properties of methane for process design and operations. Three tables are provided for gaseous and liquid methane at...

ASTM D3956-12 - Standard Specification for Methane Thermophysical Property Tables
November 1, 2012 - ASTM International

1.1 The thermophysical property tables for methane are for use in the calculation of the pressure-volume-temperature (PVT), thermodynamic, and transport properties of methane for process design and operations. Three tables are provided for gaseous and liquid methane at...

ASTM D3956-07 - Standard Specification for Methane Thermophysical Property Tables
June 1, 2007 - ASTM International

1.1 The thermophysical property tables for methane are for use in the calculation of the pressure-volume-temperature (PVT), thermodynamic, and transport properties of methane for process design and operations. Tables are provided for gaseous and liquid methane at temperatures...

ISO TR 22302 - Natural gas - Calculation of methane number
July 1, 2014 - ISO

This Technical Report describes methods for the calculation of the methane number (MN) of dry natural gas when the composition of the gas by mole fraction is known. If the difference of MN between two calculation methods is more than 6, it is recommended to use a test method to...

ASTM D3956-93(2003)e1 - Standard Specification for Methane Thermophysical Property Tables
May 10, 2003 - ASTM International

1.1 The methane thermophysical property tables are for use in the calculation of the pressure-volume-temperature (PVT), thermodynamic, and transport properties of methane for process design and operations. Tables are provided for gaseous and liquid methane at temperatures...

ASTM D3956-93(2003) - Standard Specification for Methane Thermophysical Property Tables
May 10, 2003 - ASTM International

1.1 The methane thermophysical property tables are for use in the calculation of the pressure-volume-temperature (PVT), thermodynamic, and transport properties of methane for process design and operations. Tables are provided for gaseous and liquid methane at temperatures...

ASTM D3956-93(1998) - Standard Specification for Methane Thermophysical Property Tables
May 10, 1998 - ASTM International

1.1 The methane thermophysical property tables are for use in the calculation of the pressure-volume-temperature (PVT), thermodynamic and transport properties of methane for process design and operations. Tables are provided for gaseous and liquid methane at temperatures...

ASTM D3956 - Standard Specification for Methane Thermophysical Property Tables
November 1, 2012 - ASTM

The thermophysical property tables for methane are for use in the calculation of the pressure-volume-temperature (PVT), thermodynamic, and transport properties of methane for process design and operations. Three tables are provided for gaseous and liquid methane at temperatures...

ISO 18871 - Method of determining coalbed methane content
September 15, 2015 - ISO

This International standard provides methodology for measuring coalbed methane content of coal core samples obtained by coring or sidewall coring during well drilling. This standard has to be also applied to drill cuttings samples, if the equipment for the determination of the coalbed...

ASHRAE ST-16-012 - Optimizing Excess Air in Relation to Energy, Temperature, and Reduction of Emissions of Methane Gas in a Combustion Nozzle— Using Numerical Combustion Modeling
January 1, 2016 - ASHRAE

Optimizing the combustion performance and reducing emissions of methane gas by varying excess air has been and continues to be an area of interest for researchers, manufacturers, and operators of equipment such as gas-fired boilers, with the aim of developing more...

Methane from Community Wastes
November 8, 1991 - CRC

It is hoped that this book will promote an appreciation of the environmental problems, energy demand and resources, the economics and risks involved that are essential to define the role of waste-to-energy systems in the future.

Advertisement