loading
ASTM E3022-26a - Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
July 1, 2026 - ASTM International

1.1 This practice covers the procedures for testing the performance of ultraviolet A (UV-A), light emitting diode (LED) lamps used in fluorescent penetrant and fluorescent magnetic particle testing (see Guides E709 and E2297, and Practices E165/E165M, E1208, E1209, E1210, E1219,...

ASTM E3022-26 - Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
May 1, 2026 - ASTM International

1.1 This practice covers the procedures for testing the performance of ultraviolet A (UV-A), light emitting diode (LED) lamps used in fluorescent penetrant and fluorescent magnetic particle testing (see Guides E709 and E2297, and Practices E165/E165M, E1208, E1209, E1210, E1219,...

ASTM E3248-26 - Standard Guide for Non-Aqueous Phase Liquid (NAPL) Mobility and Migration in Sediment—Conceptual Models for NAPL Emplacement and Influence on NAPL Movement
May 15, 2026 - ASTM International

4.1 Intended Users: 4.1.1 This guide may be used by various parties involved in programs evaluating the movement of NAPL in sediment, including regulatory agencies, project sponsors, environmental consultants, risk assessors, site remediation professionals, environmental contractors, analytical...

ASTM D5925-26 - Standard Practice for Preliminary Sizing and Delineation of Soil Absorption Field Areas for On-Site Septic Systems
February 15, 2026 - ASTM International

4.1 This practice should be used in conjunction with a surface and subsurface site investigation to delineate a recommended field area that is adequate for any septic system that can reasonably be anticipated for the site. If actual design results in a smaller field area, the boundaries can be...

ASTM E3300-26 - Standard Guide for Non-Aqueous Phase Liquid (NAPL) Mobility and Migration in Sediment—Factors Affecting Ebullition and Evaluating Ebullition Activity and the Associated Ebullition-Facilitated Transport of NAPL/Contaminants
April 1, 2026 - ASTM International

4.1 Intended Users: 4.1.1 This guide may be used by various parties involved in programs evaluating ebullition activity or NAPL/contaminants EFT in sediment (or both), including regulatory agencies, project sponsors, environmental consultants, risk assessors, site remediation professionals,...

ASTM E3205-26 - Standard Test Method for Small Punch Testing of Metallic Materials
February 1, 2026 - ASTM International

4.1 The safety margins provided in the design for a component or structure can be reduced throughout its service life by aging. Aging is the process by which the physical and mechanical characteristics of component or structure materials change with time or use; this process may proceed by a single...

ASTM D8084-26 - Standard Test Method for Photoelectrochemical Oxygen Demand of Freshwater Sources for Drinking Water Treatment Plants and Treated Drinking Water
January 1, 2026 - ASTM International

1.1 This test method covers a protocol for the determination of the photoelectrochemical oxygen demand of freshwater sources for drinking water treatment plants and treated drinking water in the range of 0.7 mg/L to 20 mg/L. Higher levels may be determined by sample dilution. 1.2...

ASTM E3511-26 - Standard Guide for Per- and Polyfluoroalkyl Substances (PFAS) Sampling of Environmental Media
January 1, 2026 - ASTM International

1.1 In this guide, practitioners are informed on the considerations relevant to the environmental field sampling component of data acquisition programs for per- and polyfluoroalkyl substances (PFAS). 1.2 In this guide, the collection of environmental media, including potable water (such as drinking...

ASTM E3268-25 - Standard Guide for Non-Aqueous Phase Liquid (NAPL) Mobility and Migration in Sediment—Sample Collection, Field Screening, and Handling
December 1, 2025 - ASTM International

4.1 Intended Users: 4.1.1 This guide may be used by various parties involved in programs evaluating the movement of NAPL in sediment, including regulatory agencies, project sponsors, environmental consultants, risk assessors, site remediation professionals, environmental contractors, environmental...

ASTM E3499-25 - Standard Test Method for Indentation Plastometry of Metallic Materials
October 1, 2025 - ASTM International

5.1 The indentation plastometry test can provide stress-strain curves that are comparable with those obtained from conventional tension testing. 5.2 Evaluation of the mechanical properties such as yield strength, tensile strength, and uniform elongation at necking is important throughout the...

ASTM D6440-10(2025) - Standard Terminology Relating to Hydrocarbon Resins
July 1, 2025 - ASTM International

1.1 The hydrocarbon resin industry continues to evolve from a source of replacement products for naturally-derived materials to industrial materials that have no naturally-derived counterparts. Along with this changing character of the industry, various manufacturing participants have introduced...

ASTM D6245-25 - Standard Guide on the Relationship of Indoor Carbon Dioxide Concentrations to Indoor Air Quality and Ventilation
September 1, 2025 - ASTM International

5.1 Indoor CO2 concentrations have been used as indicators of IAQ for many years, involving both appropriate and inappropriate interpretations of indoor CO2 concentrations (1).5 Appropriate uses include estimating expected levels of occupant comfort in terms of human body odor perception, studying...

ASTM E3033-25 - Standard Guide for Risk Assessment Screening for Beneficial Use of Inactive and Unregulated Solid Waste Disposal and Chemically Impacted Sites
July 1, 2025 - ASTM International

1.1 This guide provides a site risk management screening framework for the human use of: (1)inactive solid waste disposal sites, unregulated solid waste disposal sites, and sites impacted by chemical releases that are not currently within an environmental regulatory agency cleanup program; (2)...

ASTM D6235-25 - Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites
July 1, 2025 - ASTM International

1.1 Applicability of the ESC Process-This practice covers a process for expedited site characterization (ESC) of hazardous waste contaminated sites2 to identify vadose zone, groundwater and other relevant contaminant migration pathways and determine the distribution, concentration, and fate of...

ASTM E3022-25 - Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
January 1, 2025 - ASTM International

1.1 This practice covers the procedures for testing the performance of ultraviolet A (UV-A), light emitting diode (LED) lamps used in fluorescent penetrant and fluorescent magnetic particle testing (see Guides E709 and E2297, and Practices E165/E165M, E1208, E1209, E1210, E1219, E1417/E1417M...

ASTM E3248-25 - Standard Guide for Non-Aqueous Phase Liquid (NAPL) Mobility and Migration in Sediment—Conceptual Models for NAPL Emplacement and Influence on NAPL Movement
June 1, 2025 - ASTM International

4.1 Intended Users: 4.1.1 This guide may be used by various parties involved in programs evaluating the movement of NAPL in sediment, including regulatory agencies, project sponsors, environmental consultants, risk assessors, site remediation professionals, environmental contractors, analytical...

ASTM E995-25 - Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy
April 1, 2025 - ASTM International

5.1 Background subtraction techniques in AES were originally employed as a method of enhancement of the relatively weak Auger signals to distinguish them from the slowly varying background of secondary and backscattered electrons. Interest in obtaining useful information from the Auger peak line...

ASTM E1326-25 - Standard Guide for Evaluating Non-culture Microbiological Tests
May 1, 2025 - ASTM International

1.1 The purpose of this guide is to assist users and producers of non-culture microbiological tests in determining the applicability of the test for processing different types of samples and evaluating the accuracy of the results. Culture test procedures such as the heterotrophic (standard) plate...

ASTM E3022-24 - Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
December 1, 2024 - ASTM International

1.1 This practice covers the procedures for testing the performance of ultraviolet A (UV-A), light emitting diode (LED) lamps used in fluorescent penetrant and fluorescent magnetic particle testing (see Guides E709 and E2297, and Practices E165/E165M, E1208, E1209, E1210, E1219, E1417/E1417M...

ASTM E2108-25 - Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
April 1, 2025 - ASTM International

5.1 X-ray photoelectron spectroscopy is used extensively for the surface analysis of materials. Elements (with the exception of hydrogen and helium) are identified from comparisons of the binding energies determined from photoelectron spectra with tabulated values. Information on chemical state can...

Advertisement