loading
AWPA P25 - STANDARD FOR INORGANIC BORON (SBX)
January 1, 2020 - AWPA/WOOD
A description is not available for this item.
SEMI P25 - SPECIFICATION FOR MEASURING DEPTH OF FOCUS AND BEST FOCUS
SEMI
A description is not available for this item.
CGA P-25 - Guide for Flat-Bottomed LOX/LIN/LAR Storage Tank Systems
January 1, 2007 - CGA/GAS
A description is not available for this item.
CGA P-2.5 - STANDARD FOR TRANSFILLING OF HIGH PRESSURE GASEOUS OXYGEN USED FOR RESPIRATION
January 1, 2018 - CGA/GAS
A description is not available for this item.
ITU RADIO REGULATIONS ANX - RADIO REGULATIONS ANNEX 1
ITU-R
A description is not available for this item.
ITU RADIO REGULATIONS - RADIO REGULATIONS 4 VOLUME SET * A4 SIZE
ITU-R
A description is not available for this item.
ASTM B881-25a - Standard Terminology Relating to Aluminum- and Magnesium-Alloy Products
December 15, 2025 - ASTM International

1.1 This terminology covers the principal terms and definitions relating to aluminum- and magnesium-alloy products. It is published to encourage uniformity of terminology throughout Committee B07 product specifications. 1.2 Certain definitions and definitions of terms specific to a standard will...

ASTM C94/C94M-25a - Standard Specification for Ready-Mixed Concrete
December 15, 2025 - ASTM International

1.1 This specification covers ready-mixed concrete as defined in 3.2.2 (Note 1). Requirements for quality of ready-mixed concrete shall be either as stated in this specification or as ordered by the purchaser. When the purchaser's requirements, as stated in the order, differ from those in this...

ASTM B37-25 - Standard Specification for Aluminum for Use in Iron and Steel Manufacture
December 15, 2025 - ASTM International

1.1 This specification covers all aluminum-alloy deoxidizing products of all compositions in the form of ingots, bars, rods, cones, nuggets, shot, or stars, for use in the manufacture of iron and steel. Six of the most commonly used deoxidizing product compositions are designated as shown in Table...

ASTM B108/B108M-25 - Standard Specification for Aluminum-Alloy Permanent Mold Castings
December 15, 2025 - ASTM International

1.1 This specification3 covers all registered2 aluminum-alloy permanent mold castings with the most common designated as shown in Table 1. 1.2 This specification is for aluminum-alloy permanent mold castings used in general purpose applications. It may not address the mechanical properties,...

ASTM D1900-25 - Standard Practice for Carbon Black—Sampling Bulk Shipments
December 15, 2025 - ASTM International

3.1 Sampling of bulk shipments of carbon blacks is of utmost importance since the location and number of samples taken by different laboratories can have a significant effect on the agreement of test values obtained. This practice is for use in obtaining representative samples of carbon black in...

ASTM D1921-25 - Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
December 15, 2025 - ASTM International

4.1 A dry mass of plastic material is placed on a series of sieves arranged in order of increasing fineness and the mass is divided into fractions corresponding to the sieve opening. 4.2 These test methods are used to determine particle size distribution and therefore are useful for determining...

ASTM E907-25 - Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems
December 15, 2025 - ASTM International

4.1 This field test method is suitable for determining the uplift resistance of the roofing system as stated in applicable specifications, bid documents, or where required by other authorities having jurisdiction. This field test method is also intended to supplement measurement of the uplift...

ASTM E1953-25 - Standard Practice for Description of Thermal Analysis and Rheology Apparatus
December 15, 2025 - ASTM International

4.1 Section 5 identifies essential instrumentation and accessories required to perform thermal analysis, rheometry, or viscometry for a variety of different instruments. The appropriate generic instrument description should be included in any test method describing use or application of the thermal...

ASTM ISO/ASTM52116-25 - Standard Practice for Dosimetry for a Self-Contained Dry-Storage Gamma Irradiator
December 15, 2025 - ASTM International

4.1 The design and operation of a self-contained irradiator should ensure that reproducible absorbed doses are obtained when the same irradiation parameters are used. Dosimetry is performed to determine the relationship between the irradiation parameters and the absorbed dose. 4.1.1 For most...

ASTM E3076-25 - Standard Practice for Determination of the Slope in the Linear Region of a Test Record
December 15, 2025 - ASTM International

5.1 It is often necessary to determine the slope of a linear region within a test record, and for standardization purposes, it is desirable to have a method for determining the slope that is not subjective. There are numerous ASTM standard test methods where the test procedure or analysis requires...

ASTM D7617/D7617M-25 - Standard Test Method for Transverse Shear Strength of Fiber-Reinforced Polymer Matrix Composite Bars
December 15, 2025 - ASTM International

5.1 This test method for transverse shear strength is intended for use in laboratory tests in which the principal variable is the size or type of FRP bars. The test may be used for smooth round rods or on bars with a textured or undulating surface added to promote bond of the bars to Portland...

ASTM D7994-25 - Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
December 15, 2025 - ASTM International

5.1 The total fluorine, chlorine, and sulfur contained in LPG, similar low molecular weight hydrocarbons, and DME can be harmful to many catalytic chemical processes, lead to corrosion, and contribute to pollutant emissions. While LPG specifications limit sulfur, some specifications also contain...

Advertisement