loading
AIHA ACCOUNTING - ACCOUNTING AND RECORDKEEPING MADE EASY FOR THE SELF-EMPLOYED
AIHA
A description is not available for this item.
ASTM D6542-05(2026) - Standard Practice for Tonnage Calculation of Coal in a Stockpile
July 15, 2026 - ASTM International

4.1 The physical inventory of tons of coal in a stockpile, as calculated by this practice, may be used for accounting and tax purposes. 4.2 The inventory results may be compared to other estimates of the inventory, such as: 4.2.1 Tons from a previous inventory less tons shipped or consumed....

ASTM D4211-26 - Standard Guide for Fish Sampling
July 1, 2026 - ASTM International

4.1 Fish sampling includes a number of lethal and non-lethal practices. 4.2 This guide provides an overview of commonly used fish sampling practices. 4.3 This summary serves as a brief accounting of options available to personnel responsible for determining the fish sampling practice or...

ASTM E1935-26 - Standard Practice for Calibrating and Measuring CT Density
June 15, 2026 - ASTM International

6.1 This practice allows specification of the density calibration procedures to be used to calibrate and perform material density measurements using CT image data. Such measurements can be used to evaluate parts, characterize a particular system, or compare different systems, provided that observed...

ASTM G203-10(2026) - Standard Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems
June 1, 2026 - ASTM International

5.1 Many sliding systems exhibit intermittent high friction force excursions compared to competing tribosystems. However, where friction forces or friction coefficients are averaged, the test data may show that the two systems have the same friction characteristics, when in fact they were not the...

ASTM E1125-16(2026) - Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
June 1, 2026 - ASTM International

5.1 The electrical output of a photovoltaic device is dependent on the spectral content of the illumination source, its intensity, and the device temperature. To make standardized, accurate measurements of the performance of photovoltaic devices under a variety of light sources when the intensity...

ASTM F1939-26 - Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating
June 15, 2026 - ASTM International

1.1 This test method rates the non-steady state thermal resistance or insulating characteristics of flame resistant clothing materials subjected to a continuous, standardized radiant heat exposure. 1.1.1 This test method is not applicable to clothing materials that are not flame resistant. Note 1:...

ASTM D4211-21(2026) - Standard Guide for Fish Sampling
May 1, 2026 - ASTM International

4.1 Fish sampling includes a number of lethal and non-lethal practices. 4.2 This guide provides an overview of commonly used fish sampling practices. 4.3 This summary serves as a brief accounting of options available to personnel responsible for determining the fish sampling practice or...

ASTM C1131-26 - Standard Practice for Life Cycle Cost Analysis (LCCA) of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
May 1, 2026 - ASTM International

3.1 The significance of the LCA method is that it is a comprehensive technique for taking into account all relevant monetary values over the project design life and provides a measure of the total cost of the material, system, or structure. 3.2 The LCA method can be effectively applied in...

ASTM D6780/D6780M-26 - Standard Test Methods for Water Content and Dry Density of Soil In situ by Time Domain Reflectometry (TDR)
June 1, 2026 - ASTM International

5.1 This test method can be used to determine the density and water content of naturally occurring soils and of soils placed during the construction of earth embankments, road fills, and structural backfills. 5.2 Time domain reflectometry (TDR) measures the apparent dielectric constant (Procedure...

ASTM D5201-26 - Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
June 1, 2026 - ASTM International

1.1 This practice covers procedures commonly used in the paint industry to formulate paints and coating materials. It describes procedures for calculating formulation values for weight solids, volume solids, solvent content, volatile organic compound (VOC) content, hazardous air pollutant (HAP)...

ASTM D4520-18(2026) - Standard Practice for Determining Water Injectivity Through the Use of On-Site Floods
May 1, 2026 - ASTM International

5.1 The injectivity of a water is best determined by measurements as near to the well as possible to minimize changes in water properties due to air contact and time. This practice describes how core flow tests are carried out near the well. 5.2 This practice permits the differentiation of...

ASTM E1074-15(2026) - Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
April 1, 2026 - ASTM International

5.1 The NB (NS) method provides a measure of the economic performance of an investment, taking into account all relevant monetary values associated with that investment over the investor's study period. The NB (NS) measure can be expressed in either present value or equivalent annual value...

ASTM F2703-26 - Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame-Resistant Materials for Clothing with Burn Injury Prediction
May 1, 2026 - ASTM International

1.1 This test method measures the non-steady state heat transfer through flame-resistant materials for clothing subjected to a combined convective and radiant heat exposure. 1.1.1 This test method is not applicable to materials that are not flame resistant. Note 1: The determination of a material's...

ASTM E1361-02(2026) - Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
April 1, 2026 - ASTM International

4.1 Accuracy in quantitative X-ray spectrometric analysis depends upon adequate accounting for interelement effects either through sample preparation or through mathematical correction procedures, or both. This guide is intended to serve as an introduction to users of X-ray fluorescence...

ASTM C1922-26 - Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters by Way of Water Loss
May 1, 2026 - ASTM International

5.1 This test method provides a means for determining the ability of mortars and plasters to retain water when applied to specific substrates based on the intended use of the tested mortar. 5.2 The results obtained using this test method may be used to compare the relative ability of mortars and...

ASTM F2700-26 - Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame-Resistant Materials for Clothing with Continuous Heating
May 1, 2026 - ASTM International

1.1 This test method measures the non-steady state heat transfer through flame-resistant materials for clothing subjected to a continuous, combined convective and radiant heat exposure. 1.1.1 This test method is not applicable to materials that are not flame resistant. Note 1: The determination of...

ASTM D4933-16(2026) - Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials
April 1, 2026 - ASTM International

4.1 Many physical and mechanical properties of wood and wood-based materials change in response to the environmental equilibrium moisture content, and any comparison of these properties must take moisture content into account. A consistent base for comparison among different test samples and...

ASTM D5482-26 - Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method—Atmospheric)
May 1, 2026 - ASTM International

1.1 This test method covers a procedure for the determination of total vapor pressure of petroleum products and liquid fuels using automatic vapor pressure instruments. The test method is suitable for testing samples with boiling points above 0?°C (32?°F) that exert a vapor pressure between 7?kPa...

ASTM E1121-15(2026) - Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
April 1, 2026 - ASTM International

5.1 The payback method is part of a family of economic evaluation methods that provide measures of economic performance of an investment. Included in this family of evaluation methods are life-cycle costing, benefit-to-cost and savings-to-investment ratios, net benefits, and internal rates of...

Advertisement