loading
ASTM CARBON - ASTM STANDARDS ON ACTIVATED CARBON 2ND EDITION
ASTM
A description is not available for this item.
UFGS-43 31 13.13 10 - ACTIVATED CARBON-GAS AND LIQUID PURIFICATION FILTERS
August 1, 2018 - ARMY

NOTE: This guide specification covers the requirements for systems to transfer organic contaminants from water to activated carbon adsorption media.

UFGS-43 31 13.14 - DOWNFLOW LIQUID ACTIVATED CARBON ADSORPTION UNITS
October 1, 2007 - NAVY

NOTE: This guide specification covers the requirements for systems to transfer organic contaminants from water to activated carbon adsorption media.

Activated Metals in Organic Synthesis
May 18, 1993 - CRC

Activated Metals in Organic Synthesis discusses fundamental principles of the generation of activated, highly reactive metals, and their applications in organic synthesis. Following an introductory chapter on basic forms of metals the chapters in Part 1 are devoted to...

ASTM D2867-23 - Standard Test Methods for Moisture in Activated Carbon
April 1, 2023 - ASTM International

4.1 The moisture content of activated carbon is often required to define and express its properties in relation to the net weight of the carbon. 4.2 The moisture content of activated carbon packed in typical shipping containers will usually increase during...

ISO 21340 - Test methods for fibrous activated carbon
November 1, 2017 - ISO

This document specifies test methods for determining the properties of fibrous activated carbon, including specific surface area, pore volume, fibre and sheet properties, mass loss on drying, pH value, total ash content, and performance for toluene adsorption, methylene blue...

ASTM D2866-11(2025) - Standard Test Method for Total Ash Content of Activated Carbon
May 1, 2025 - ASTM International

4.1 In specific end uses, the amount and composition of the ash may influence the capabilities and certain desired properties of activated carbon. 4.2 Other automated methods for determination of ash content, such as combusting the carbon in a thermogravimetric analyzer (TGA)...

ASTM D2867-17 - Standard Test Methods for Moisture in Activated Carbon
July 1, 2017 - ASTM International

4.1 The moisture content of activated carbon is often required to define and express its properties in relation to the net weight of the carbon. 4.2 The moisture content of activated carbon packed in typical shipping containers will usually increase during...

ASTM D4069-95(2026)e1 - Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams
June 1, 2026 - ASTM International

This standard covers the specifications for physical properties and performance requirements of virgin impregnated activated carbon to be used for the removal of gaseous radioiodine species from gas streams. The activated carbon furnished under this specification shall...

ASTM D2867-09(2014) - Standard Test Methods for Moisture in Activated Carbon
July 1, 2014 - ASTM International

4.1 The moisture content of activated carbon is often required to define and express its properties in relation to the net weight of the carbon. 4.2 The moisture content of activated carbon packed in typical shipping containers will usually increase during...

ASTM D2867 - Standard Test Methods for Moisture in Activated Carbon
July 1, 2017 - ASTM

These test methods provide two procedures for the determination of the moisture content of activated carbon.2 The procedures may also be used to dry samples required for other tests. The oven drying method is used when water is the only volatile material present and is in significant...

DS/EN 13639 - Determination of total organic carbon in limestone
October 11, 2017 - DS

This European Standard specifies methods for the determination of the total organic carbon content (TOC) in limestone. The standard describes the reference method and alternative methods which can be considered to be equivalent. In the case of a dispute, only the reference...

ASTM D2867-09 - Standard Test Methods for Moisture in Activated Carbon
November 1, 2009 - ASTM International

The moisture content of activated carbon is often required to define and express its properties in relation to the net weight of the carbon. The moisture content of activated carbon packed in typical shipping containers will usually increase during transportation...

ASTM D2867-04 - Standard Test Methods for Moisture in Activated Carbon
April 1, 2004 - ASTM International

The moisture content of activated carbon is often required to define and express its properties in relation to the net weight of the carbon. The moisture content of activated carbon packed in typical shipping containers will usually increase during transportation...

ASTM E1625-94(2001) - Standard Test Method for Determining Biodegradability of Organic Chemicals in Semi-Continuous Activated Sludge (SCAS)
January 1, 2001 - ASTM International

Secondary wastewater treatment using activated sludge is one of the most important biological treatment processes in use today. The semi-continuous activated sludge (SCAS) test employs activated sludge from a domestic activated sludge plant to assess biodegradation of...

ASTM D2866-11 - Standard Test Method for Total Ash Content of Activated Carbon
May 1, 2011 - ASTM International

1.1 This test method describes a procedure for the determination of total ash content of activated carbon. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to...

ASTM D2867-99 - Standard Test Methods for Moisture in Activated Carbon
February 10, 1999 - ASTM International

1.1 These test methods provide two procedures for the determination of the moisture content of activated carbon. The procedures may also be used to dry samples required for other tests. The oven-drying method is used when water is the only volatile material present and is in...

DSF/FPREN 13639 - Determination of total organic carbon in limestone
DS

This European Standard specifies methods for the determination of the total organic carbon content (TOC) in limestone. The standard describes the reference method and alternative methods which can be considered to be equivalent. In the case of a dispute, only the reference...

ASTM D2866-94(2004) - Standard Test Method for Total Ash Content of Activated Carbon
April 1, 2004 - ASTM International

1.1 This test method describes a procedure for the determination of total ash content of activated carbon. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to...

ASTM D2866-94(1999) - Standard Test Method for Total Ash Content of Activated Carbon
February 10, 1999 - ASTM International

1.1 This test method describes a procedure for the determination of total ash content of activated carbon. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to...

Advertisement