This SAE Standard covers the general requirements and the test requirements for a flashing warning lamp for agricultural equipment.
This Standard provides performance and general design requirements and related test procedures for headlamps for use on agricultural equipment that may be operated on public roads.
This SAE Standard provides performance and general design requirements and related test procedures for headlamps for use on agricultural equipment that may be operated on public roads.
This SAE Standard specifies terminology for agricultural equipment designed primarily for use in agricultural operations fo rthe production of food and fiber.
This Standard provides specifications for lighting and marking of agricultural equipment whenever such equipment is operating or is traveling on a highway
This Standard is a guide to provide a reasonable degree of personal safety for operators and other persons during the normal operation and servicing of agricultural field equipment. This Standard does not apply to skid steer loaders, permanently installed grain dryers, and...
This part of ANSI/ASABE S648 establishes test procedures and performance requirements for braking of agricultural tractors. The requirements and minimum performance criteria are directed to operation and parking of agricultural equipment having a maximum design ground speed...
This part of ANSI/ASABE S648 provides normative references, defines terms and definitions and establishes general test procedures for the performance of braking systems used on agricultural field equipment (as defined in ANSI/ASAE S390). Purpose The purpose of this part of ANSI/ASABE...
The scope of this standard is primarily directed to identifying agricultural equipment (implements of husbandry) that have been designed in their original equipment configuration for specified ground speeds greater than 40 km/h (25 mile/h) but under 65 km/h (40 mile/h). The...
This specification covers a high fire point natural vegetable oil ester insulating fluid for use as a dielectric and cooling medium in new and existing power and distribution electrical apparatus such as transformers and attendant equipment. The physical property requirement including color,...
This document gives guidelines for the design, selection, installation and use of the equipment required to establish basic test facilities for irrigation equipment evaluation. It provides the information sufficient to complement the detailed procedures included in ISO 7714, ISO 8026,...
This part of ANSI/ASABE S648 provides normative references and establishes the minimum requirements related to braking of towed vehicles and towed vehicle trains. These requirements and minimum performance criteria are directed to the operation and parking of towed vehicles and towed vehicle trains...
5.1 This practice shall only be used on soils having infiltration rates ranging from 2.5 mm/h (field hydraulic conductivity of 6.9?×?10-7 m/s) to 15000 mm/h (field hydraulic conductivity of 4.0?×?10-3 m/s). 5.2 This practice is useful for field measurement of the infiltration rate and calculation...
5.1 This guide is for testing the performance applied stretch wrapping film and stretch wrapping equipment during and after the film has been applied to a unit load or structure. These tests are not written with the intention for them to be applied to agricultural stretch wrapping...
1.1 This practice covers procedures for the collection and reduction of samples of lime and limestone products to be used for physical and chemical tests. 1.2 This practice further covers inspection, rejection, retesting, packing, and marking of lime and limestone products as it may be used in the...
This part of ANSI/ASABE S648 establishes the minimum requirements for interfacing the service brake system and parking brake system on towing agricultural field equipment with the service brake system and parking brake system on towed agricultural field equipment. The...
Narrow Your Results