loading
ALUMINUM CASTING TECHNOLO - Aluminum Casting Technology
January 1, 1993 - AFS

A welcome update to the second edition, published in 1993, the updated Aluminum Casting Technology will feature the latest information on aluminum casting alloys, melting practices and furnaces, chemical and physical characteristics, design, casting processes, gating & risering, heat...

PIPELINE SAFETY - PIPELINE SAFETY REGULATIONS
DOT
A description is not available for this item.
HI PIPE FRICTION MANUAL - HI PIPE FRICTION MANUAL
HI/HYDRAUL
A description is not available for this item.
ASTM B745/B745M-15(2021) - Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
December 1, 2021 - ASTM International

1.1 This specification covers corrugated aluminum pipe intended for use for storm water drainage, underdrains, the construction of culverts, and similar uses. Pipe covered by this specification is not normally used for the conveyance of sanitary or industrial wastes. 1.2 This...

AASHTO M 197 - Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
January 1, 2020 - AASHTO

This specification covers aluminum alloy sheets used in the fabrication of corrugated aluminum pipe intended for use for storm water drainage, underdrains, culverts, and similar uses. The material is furnished corrugated in cut lengths, and uncorrugated in coils and cut lengths.

ASTM B744/B744M-15(2020) - Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
September 1, 2020 - ASTM International

This specification covers aluminum alloy sheets used in the fabrication of corrugated aluminum pipe intended for use for storm water drainage, underdrains, culverts, and similar uses. The material is furnished corrugated in cut lengths, and uncorrugated in coils and cut lengths...

ASTM B788/B788M-09(2025) - Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
October 1, 2025 - ASTM International

4.1 Corrugated aluminum pipe functions structurally as a flexible ring which is supported by and interacts with the compacted surrounding soil. The soil constructed around the pipe is thus an integral part of the structural system. It is therefore important to ensure that the...

NASA SSTD-8070-0059 - Low Pressure Aluminum Pipe Systems with Piping Designator “E”
August 21, 2019 - NASA

PURPOSE This John C. Stennis Space Center (SSC) standard (SSTD) specifies the materials and procedures for the construction of low pressure aluminum piping systems with Piping Designator "E" at SSC. APPLICABILITY a. This standard shall be used for specifying materials and components to be...

TH HILL DS-1 VOLUME 6 - Aluminum Drill Pipe Inspection
August 1, 2020 - THHILL
A description is not available for this item.
ASTM F1281-26 - Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
February 1, 2026 - ASTM International

This specification covers coextruded cross linked polyethylene composite pressure pipe with welded aluminum tube reinforcement between the inner and outer layers. The inner and outer cross linked polyethylene layers are bonded to the aluminum tube by a melt adhesive. Included...

ASTM B790/B790M-16(2021) - Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
December 1, 2021 - ASTM International

1.1 This practice is intended for the structural design of corrugated aluminum pipe and pipe-arches, and aluminum structural plate pipe, pipe-arches, and arches for use as culverts and storm sewers and other buried conduits. This practice is for pipe...

AASHTO M 196 - Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
January 1, 2016 - AASHTO

This specification covers corrugated aluminum pipe intended for use for storm water drainage, underdrains, the construction of culverts, and similar uses. Pipe covered by this specification is not normally used for the conveyance of sanitary or industrial wastes. This...

ASTM B746/B746M-25 - Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
May 1, 2025 - ASTM International

1.1 This specification covers corrugated aluminum alloy structural plate used in the construction of pipe, pipe-arches, arches, underpasses, box culverts, and special shapes for field assembly. Appropriate fasteners are also described. The pipe, arches, and other shapes...

ASTM F1281-25 - Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
May 1, 2025 - ASTM International

This specification covers coextruded cross linked polyethylene composite pressure pipe with welded aluminum tube reinforcement between the inner and outer layers. The inner and outer cross linked polyethylene layers are bonded to the aluminum tube by a melt adhesive. Included...

ASTM F1281-25e1 - Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
May 1, 2025 - ASTM International

This specification covers coextruded cross linked polyethylene composite pressure pipe with welded aluminum tube reinforcement between the inner and outer layers. The inner and outer cross linked polyethylene layers are bonded to the aluminum tube by a melt adhesive. Included...

ASTM B745/B745M - Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
May 1, 2015 - ASTM

This specification covers corrugated aluminum pipe intended for use for storm water drainage, underdrains, the construction of culverts, and similar uses. Pipe covered by this specification is not normally used for the conveyance of sanitary or industrial wastes. This...

ASTM B745/B745M-15 - Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
May 1, 2015 - ASTM International

1.1 This specification covers corrugated aluminum pipe intended for use for storm water drainage, underdrains, the construction of culverts, and similar uses. Pipe covered by this specification is not normally used for the conveyance of sanitary or industrial wastes. 1.2 This...

MIL-DTL-25995 - PIPE, ALUMINUM ALLOY, DRAWN OR EXTRUDED
November 25, 2020 - NPFC

Scope. This specification covers requirements for pipe, aluminum alloy, drawn or extruded in the dimensions and weights specified, and a schedule of 5, 10, or 40 (standard), or 80 (extra heavy).

Advertisement