loading
ASTM C140/C140M-26a - Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
June 1, 2026 - ASTM International

1.1 These test methods provide various testing procedures commonly used for evaluating characteristics of concrete masonry units and related concrete units. Methods are provided for sampling, measurement of dimensions, compressive strength, absorption, unit weight (density), moisture content,...

ASTM C1884-25 - Standard Specification for Dry-Cast Manufactured Concrete Ballast Units
July 1, 2025 - ASTM International

1.1 This specification covers dry-cast, manufactured concrete units that are primarily used for ballast applications. These units are machine-made from hydraulic cement, water, and suitable mineral aggregates with or without the inclusion of other materials. Note 1: The design of concrete...

ASTM C140/C140M-26 - Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
January 1, 2026 - ASTM International

1.1 These test methods provide various testing procedures commonly used for evaluating characteristics of concrete masonry units and related concrete units. Methods are provided for sampling, measurement of dimensions, compressive strength, absorption, unit weight (density), moisture content,...

ASTM D7111-16(2025) - Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
November 1, 2025 - ASTM International

5.1 Trace elemental analysis is used to indicate the level of contamination of middle distillate fuels. Trace metals in turbine fuels can cause corrosion and deposition on turbine components at elevated temperatures. Some diesel fuels have specification limit requirements for trace metals to guard...

ASTM D7851-25 - Standard Guide for Design of Sustainable, Low-Slope Roofing Systems
September 1, 2025 - ASTM International

1.1 This guide provides guidance and considerations related to designing sustainable low-sloped roofing systems, including exposed membrane roofs, membranes covered with landscaped and vegetative (green) overburden systems, ballasted roofs, and protected membrane roofing assemblies. A...

ASTM C140/C140M-25 - Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
July 1, 2025 - ASTM International

1.1 These test methods provide various testing procedures commonly used for evaluating characteristics of concrete masonry units and related concrete units. Methods are provided for sampling, measurement of dimensions, compressive strength, absorption, unit weight (density), moisture content,...

ASTM E2995-15a(2025) - Standard Specification for ASTM Thermohydrometers with Integral Low-Hazard Thermometers
May 15, 2025 - ASTM International

This specification is applicable to glass thermohydrometers of various scale graduation systems, intended for use in a variety of ASTM Test Methods. The thermohydrometers covered by this specification have larger maximum permissible scale errors than do their Hg-filled counterparts. It is up to the...

ASTM C1884-24 - Standard Specification for Manufactured Concrete Ballast Units
June 15, 2024 - ASTM International

1.1 This specification covers dry-cast, manufactured concrete units that are primarily used for ballast applications. These units are machine-made from hydraulic cement, water, and suitable mineral aggregates with or without the inclusion of other materials. Note 1: The design of concrete...

ASTM C140/C140M-24a - Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
December 15, 2024 - ASTM International

1.1 These test methods provide various testing procedures commonly used for evaluating characteristics of concrete masonry units and related concrete units. Methods are provided for sampling, measurement of dimensions, compressive strength, absorption, unit weight (density), moisture content,...

ASTM C1884-23a - Standard Specification for Manufactured Concrete Ballast Units
December 1, 2023 - ASTM International

1.1 This specification covers dry-cast, manufactured concrete units that are primarily used for ballast applications. These units are machine-made from hydraulic cement, water, and suitable mineral aggregates with or without the inclusion of other materials. Note 1: The design of concrete...

ASTM E2341/E2341M-05(2024) - Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites
November 1, 2024 - ASTM International

4.1 The SDN determined by this method represents an average over the interval from the beginning of brake application to the rest position. It may be a reasonable estimate of the SDN during one or more portions of the specified traffic incident if the test conditions and the incident conditions are...

UL 1993 - Self-Ballasted Lamps and Lamp Adapters
May 17, 2024 - ULSE

1.1 These requirements are intended to cover both self-ballasted lamps and self-ballasted lamp adapters rated 120 to 347 V AC nominal for connection to screw-base, pin-base, or recessed single contact (RSC or R7) lampholders. These devices are intended for use in accordance with the...

ASTM E100-19(2024) - Standard Specification for ASTM Hydrometers
May 1, 2024 - ASTM International

This specification covers glass hydrometers of various scale graduation systems, as required by the ASTM test methods in which they are used. Hydrometers shall be of the constant-mass, variable-displacement type. Hydrometers shall be made of glass, except for the scale, ballasting material,...

ASTM C140/C140M-24 - Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
June 15, 2024 - ASTM International

1.1 These test methods provide various testing procedures commonly used for evaluating characteristics of concrete masonry units and related concrete units. Methods are provided for sampling, measurement of dimensions, compressive strength, absorption, unit weight (density), moisture content,...

ASTM C1884-23 - Standard Specification for Manufactured Concrete Ballast Units
June 1, 2023 - ASTM International

1.1 This specification covers dry-cast, manufactured concrete units that are primarily used for ballast applications. These units are machine-made from hydraulic cement, water, and suitable mineral aggregates with or without the inclusion of other materials. Note 1: The design of concrete...

ASTM F2084/F2084M-01(2024) - Standard Guide for Collecting Containment Boom Performance Data in Controlled Environments
March 1, 2024 - ASTM International

4.1 This guide defines a series of test methods to determine the oil containment effectiveness of containment booms when they are subjected to a variety of towing and wave conditions. The test methods measure the tow speed at which the boom first loses oil (both in calm water and in various wave...

ASTM F2374-24 - Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
May 15, 2024 - ASTM International

1.1 This practice establishes criteria for the Design, Manufacture, Installation, Operation, Maintenance, Inspection, Training, Auditing and Major Modification of commercial use Inflatable Amusement Devices. These devices are made of flexible fabric, inflated by one or more blowers, and rely upon...

ASTM E985-24 - Standard Specification for Permanent Metal Railing Systems and Rails for Buildings
April 15, 2024 - ASTM International

1.1 This specification2 covers permanent metal railing systems (guard, stair, and ramp-rail systems) and rails (hand, wall, grab, and transfer rails) installed in and for agricultural, assembly, commercial, educational, industrial, institutional, recreational, and residential buildings. However,...

ASTM F2682-07(2024) - Standard Guide for Determining the Buoyancy to Weight Ratio of Oil Spill Containment Boom
March 1, 2024 - ASTM International

4.1 This guide describes a method of determining the buoyancy to weight ratio of spill response booms. The principle is based on Archimedes Law, which states that a body either wholly or partially immersed in a fluid will experience an upward force equal and opposite to the weight of the fluid...

ASTM F708-24 - Standard Practice for Design and Installation of Rigid Pipe Hangers
January 1, 2024 - ASTM International

This practice covers acceptable methods of fabricating and installing rigid pipe hangers used to support shipboard piping systems, it provides guidance for the design of hanger caps, straps and standoffs, selection of hanger and hanger liner materials, hanger bolting, and hanger spacing. The pipe...

Advertisement