loading
IEEE CABLE MODEMS - CABLE MODEMS: TECHNOLOGIES AND APPLICATIONS
IEEE
A description is not available for this item.
NR/L3/NDS/308/LMB6.2 - YVA Cable Drums
March 1, 2012 - NR
A description is not available for this item.
NR/L3/NDS/308/LMB6.1 - FKA (with Cable Module) Cable Drums
March 1, 2012 - NR
A description is not available for this item.
ASTM D6429-23 - Standard Guide for Selecting Surface Geophysical Methods
February 15, 2023 - ASTM International

5.1 This guide applies to commonly used surface geophysical methods for those applications listed in Table 1. The rating system used in Table 1 is based upon the ability of each method to produce results under average field conditions when compared to other methods applied to the same application....

DEF STAN-81-20 - Drums, Cable - Metric Units
August 28, 1973 - MODUK

This Standard specifies the dimensions and construction of wooden drums for the transport and storage of electric cables in normal conditions, both at home and overseas. The range of drum sizes (metric units) has been standardized by the cable making industry. For some...

DIN 46391-3 - Delivery drums for cables and ropes - Part 3: Drums with diameter of flange of more than 2 800 mm - Dimensions
May 1, 2018 - DIN

Diese Norm gilt für Spulen mit einem Flanschdurchmesser von 2 800 mm bis 4 500 mm für die Lieferung von Kabeln, Leitungen und Seilen und legt Anforderungen an Spulen im Auslieferungszustand beim Hersteller fest.

DIN 46391-2 - Delivery drums for cables and ropes - Part 2: Technical terms of delivery for wooden drums
May 1, 2018 - DIN

Die technischen Lieferbedingungen gelten für Spulen nach DIN 46391-1 aus Holz im Auslieferungszustand beim Hersteller der Spulen. Werden andere Werkstoffe verwendet, müssen entsprechende Lieferbedingungen vereinbart werden.

DIN 46391-4 - Delivery drums for cables and ropes - Part 4: Technical terms of delivery for steel drums
May 1, 2018 - DIN

Die technischen Lieferbedingungen gelten für Spulen im Auslieferungszustand beim Hersteller nach DIN 46391-1 und DIN 46391-3 aus Stahl. Für Spulen aus Holz gilt DIN 46391-2. Werden andere Werkstoffe verwendet, müssen entsprechende Lieferbedingungen vereinbart werden.

API COKE DRUM SURVEY - 1996 API Coke Drum Survey
November 1, 2003 - API

General Information The year of installation for coke drums varied from 1950 to 1997, the year that the survey was actually collected. Range of years in service accordingly was from 46 years to less than 1 year. When asked if any fires had occurred it was found that 11 of 54, or 20% of...

DFE-STD-81-20 - DRUMS,CABLE - METRIC UNITS
MODUK
A description is not available for this item.
ASTM D6429-20 - Standard Guide for Selecting Surface Geophysical Methods
August 1, 2020 - ASTM International

5.1 This guide applies to commonly used surface geophysical methods for those applications listed in Table 1. The rating system used in Table 1 is based upon the ability of each method to produce results under average field conditions when compared to other methods applied to the same application....

ASTM D6432 - Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
November 15, 2019 - ASTM

Purpose and Application: This guide covers the equipment, field procedures, and interpretation methods for the assessment of subsurface materials using the Ground Penetrating Radar (GPR) Method. GPR is most often employed as a technique that uses high-frequency electromagnetic (EM) waves (from 10...

ASTM D6432-19 - Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
November 15, 2019 - ASTM International

5.1 Concepts-This guide summarizes the equipment, field procedures, and data processing methods used to interpret geologic conditions, and to identify and provide locations of geologic anomalies and man-made objects with the GPR method. The GPR uses high-frequency EM waves (from 10 to 3000 MHz) to...

ASTM D6055-96(2019) - Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
August 1, 2019 - ASTM International

1.1 These test methods are suitable for testing the integrity of unitized loads and large cases and crates, but not individual drums or palletized drums, as well as the ability of the contents to endure normal handling, using standard mechanical handling equipment. Not all of the test...

ISO 4309 - Cranes - Wire ropes - Care and maintenance, inspection and discard
November 1, 2017 - ISO

This document establishes general principles for the care and maintenance, and inspection and discard of steel wire ropes used on cranes and hoists. In addition to guidance on storage, handling, installation and maintenance, this document provides discard criteria for those running ropes which are...

ASTM D6639-18 - Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Site Characterizations
February 1, 2018 - ASTM International

5.1 Concepts: 5.1.1 This guide summarizes the equipment, field procedures and interpretation methods used for the characterization of subsurface materials and geological structure as based on their properties to conduct, enhance or obstruct the flow of electrical currents as induced in the ground...

Advertisement