loading
ASTM FASTENER - ASTM STANDARDS FOR MECHANICAL FASTENERS AND RELATED PROCESSES
ASTM
A description is not available for this item.
IETF RFC 8908 - Captive Portal API
September 1, 2020 - IETF

Abstract This document describes an HTTP API that allows clients to interact with a Captive Portal system. With this API, clients can discover how to get out of captivity and fetch state about their Captive Portal sessions.

DIN 6929 - Screws with coarse thread and reduced shank for captive applications
August 1, 2013 - DIN

This standard specifies requirements for M3 to M30 bolts and screws ("bolts", for short) with various head styles and a diameter of the unthreaded portion of the shank smaller than the minor diameter. It covers bolts with two types of shank designs: short (K) and long (L). These bolts can be...

MS 90402 - SCREW, CAPTIVE
NPFC
A description is not available for this item.
JIS B 1188 - Cross recessed head screws with captive washer
March 21, 2017 - JSA

This Standard specifies the steel and brass cross recessed head screws with captive washer for general purposes. The cross recessed head screws specified in this Standard are screws manufactured by mounting a washer onto the screw blank before rolling the threads so that the washer does not...

JIS B 1187 - Hexagon head screws with captive washer
March 21, 2017 - JSA

This Standard specifies the steel and brass hexagon head screws with captive washer for general purposes. The hexagon head screws specified in this Standard are screws manufactured by mounting a washer onto the screw blank before rolling the threads so that the washer does not fall from the...

ISO 10597 - Road vehicles - Flat attachment fixing nuts for commercial vehicles - Test methods
March 1, 2012 - ISO

This International Standard specifies test methods and performance requirements for ensuring proper wheel or rim assembly on road vehicles by means of hexagonal nuts with a flat seating captive washer used with 18 mm, 20 mm and 22 mm studs. It is applicable to commercial vehicles as defined...

IETF RFC 8910 - Captive-Portal Identification in DHCP and Router Advertisements (RAs)
September 1, 2020 - IETF

Abstract In many environments offering short-term or temporary Internet access (such as coffee shops), it is common to start new connections in a captive portal mode. This highly restricts what the user can do until the user has satisfied the captive portal conditions. This document...

IETF RFC 7710 - Captive-Portal Identification Using DHCP or Router Advertisements (RAs)
December 1, 2015 - IETF

In many environments offering short-term or temporary Internet access (such as coffee shops), it is common to start new connections in a captive-portal mode. This highly restricts what the customer can do until the customer has authenticated. This document describes a DHCP option (and a...

NR NB 144 - 2BA Terminal Block Captive Link - Delamination of Plating
December 8, 2015 - NR

Applies to all staff involved in the supply, installation, testing or maintenance of equipment or housings fitted with 2BA terminal blocks and captive links. Purpose To highlight that defective plating on 2BA terminal block captive links has been identified and to remind staff of the...

DEF STAN 81-73 - Guide on Use of Captive Fasteners
September 21, 2016 - MODUK

This Standard provides guidance on the use of the following types of commercially available captive fasteners recommended for the closure of reusable containers for transit and storage of materiel for the Services: Captive screw Strap bolt Toggle catch Quarter turn NOTE: There...

ISO 4759-3 - Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F
June 1, 2016 - ISO

This part of ISO 4759 specifies tolerances for flat washers of product grades A, C and F with nominal diameters of 1 mm to 150 mm inclusive, designed to be used in bolted joints in combination with bolts, screws, studs and nuts. This part of ISO 4759 may be applied to non-flat washers...

DS/EN ISO 898-3 - Mechanical properties of fasteners made of carbon steel and alloy steel – Part 3: Flat washers with specified property classes (ISO 898-3:2018)
July 3, 2018 - DS

This part of ISO 898 specifies mechanical and physical properties of flat washers, designed to be used in bolted joints in combination with bolts, screws, studs and nuts with a specified property class in accordance with ISO 898-1 and ISO 898-2. Washers that conform to the...

AS6352-2 - AS6352 Captive Nut (Filler Cap)
December 1, 1955 - SAE Industry Technologies Consortia

No scope available.

AS2408-4 - AS2408 Captive Nut (Filler Cap)
April 17, 1944 - SAE Industry Technologies Consortia

No scope available.

DIN EN ISO 898-3 - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes (ISO 898-3:2018)
September 1, 2018 - DIN

This document specifies mechanical and physical properties of flat washers, designed to be used in bolted joints in combination with bolts, screws, studs and nuts with a specified property class in accordance with ISO 898-1 and ISO 898-2. NOTE 1 These types of washers can also be used...

DSF/FPREN ISO 898-3 - Mechanical properties of fasteners made of carbon steel and alloy steel – Part 3: Flat washers with specified property classes (ISO/FDIS 898-3:2017)
DS

This part of ISO 898 specifies mechanical and physical properties of flat washers, designed to be used in bolted joints in combination with bolts, screws, studs and nuts with a specified property class in accordance with ISO 898-1 and ISO 898-2. Washers that conform to the...

DSF/EN ISO 898-3/PRA1 - Mechanical properties of fasteners made of carbon steel and alloy steel – Part 3: Flat washers with specified property classes (ISO 898-3:2018)
DS

This part of ISO 898 specifies mechanical and physical properties of flat washers, designed to be used in bolted joints in combination with bolts, screws, studs and nuts with a specified property class in accordance with ISO 898-1 and ISO 898-2. Washers that conform to the...

ISO 10510 - Tapping screw and washer assemblies with plain washers
April 1, 2011 - ISO

This International Standard specifies the requirements for tapping screws and plain washer assemblies with thread sizes from ST2,2 to ST9,5 inclusive, flat seating heads and mechanical properties as specified in ISO 2702. The plain washers are captive, i.e. prevented from disassembly...

DS/EN 2883 - Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C
July 13, 2009 - DS

This standard specifies the characteristics of self-locking hexagonal nuts, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated. Classification: 1 100 MPa ) / 315 °C )

Advertisement