loading
ASTM CARBON - ASTM STANDARDS ON ACTIVATED CARBON 2ND EDITION
ASTM
A description is not available for this item.
API OIL WELL CEMENT - OIL-WELL CEMENTING PRACTICES IN THE UNITED STATES
January 1, 1959 - API

FOREWORD: Each year in the United States several thousand wells are drilled and completed - some productive of oil or gas and some dry - and during this drilling and completion most of these wells are cased, with the casing set in the bore hole surrounded by oil-well cement. This book...

ASTM D8665-26 - Standard Test Method for Measuring the Gelation Propensity of Automotive Engine Oils After Treatment with Acidified Water
June 1, 2026 - ASTM International

5.1 It is normal for some of the combustion products of an internal combustion engine, such as carbon dioxide, to penetrate the engine oil and be retained in it. 5.2 When an engine is run for a period and then stored over a long period of time, the by-products of combustion might be...

ASTM D6786-15(2023) - Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
December 1, 2023 - ASTM International

5.1 Particles in insulating oil can have a detrimental effect on the dielectric properties of the fluid, depending on the size, concentration, and nature of the particles. The source of these particles can be external contaminants, oil degradation by-products, or internal materials...

ASTM E3358-23a - Standard Guide for Per- and Polyfluoroalkyl Substances Site Screening and Initial Characterization
August 1, 2023 - ASTM International

1.1 Per- and polyfluoroalkyl substances (PFAS) are a group of over 7,000 manmade compounds consisting of polymeric chains of carbon bonded to fluorine atoms, usually with a polar functional group at the head. This guide recognizes that PFAS can be categorized as polymeric or nonpolymeric,...

ARP6223 - Oil Carbon Particulate Test
November 10, 2020 - SAE International

An oil sample is placed into an open top glass vial which is then inserted into a stainless steel pressure vessel. The vessel is then sealed, pressurized, and placed into a heated aluminum block bath for 18 hours. At the end of the 18 hour time period, the vessel is removed from the heat...

ASTM E3358-23 - Standard Guide for Per- and Polyfluoroalkyl Substances Site Screening and Initial Characterization
February 1, 2023 - ASTM International

1.1 Per- and polyfluoroalkyl substances (PFAS) are a group of over 7,000 manmade compounds consisting of polymeric chains of carbon bonded to fluorine atoms, usually with a polar functional group at the head. This guide recognizes that PFAS can be categorized as polymeric or nonpolymeric,...

DS/EN ISO 21268-4 - Soil quality – Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials – Part 4: Influence of pH on leaching with initial acid/base addition (ISO 21268-4:2019)
December 10, 2019 - DS

This document specifies a test to obtain information on the short- and long-term leaching behaviour and characteristic properties of materials. The document has been developed to measure the pH-dependent release of inorganic and organic substances from soil and soil-like material as well as to...

DS/ISO 21268-2 - Soil quality – Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials – Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter
October 21, 2019 - DS

This document specifies a test providing information on leaching of soil and soil materials under the experimental conditions specified hereafter, and particularly at a liquid to solid ratio of 10 l/kg dry matter. The document has been developed to measure the release of inorganic and organic...

DS/EN ISO 21268-1 - Soil quality – Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials – Part 1: Batch test using a liquid to solid ratio of 2 l/kg dry matter (ISO 21268-1:2019)
October 21, 2019 - DS

This document specifies a test providing information on leaching of soil and soil-like materials under the experimental conditions specified hereafter, and particularly at a liquid to solid ratio of 2 l/kg dry matter. The document has been developed to measure the release of inorganic and organic...

DS/EN ISO 21268-2 - Soil quality – Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like material – Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter (ISO 21268-2:2019)
October 21, 2019 - DS

This document specifies a test providing information on leaching of soil and soil materials under the experimental conditions specified hereafter, and particularly at a liquid to solid ratio of 10 l/kg dry matter. The document has been developed to measure the release of inorganic and organic...

DS/ISO 21268-1 - Soil quality – Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials – Part 1: Batch test using a liquid to solid ratio of 2 l/kg dry matter
October 21, 2019 - DS

This document specifies a test providing information on leaching of soil and soil-like materials under the experimental conditions specified hereafter, and particularly at a liquid to solid ratio of 2 l/kg dry matter. The document has been developed to measure the release of inorganic and organic...

ISO 21268-4 - Soil quality — Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials — Part 4: Influence of pH on leaching with initial acid/base addition
October 1, 2019 - ISO

This document specifies a test to obtain information on the short- and long-term leaching behaviour and characteristic properties of materials. The document has been developed to measure the pH-dependent release of inorganic and organic substances from soil and soil-like material as well as to...

ISO 21268-1 - Soil quality — Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials — Part 1: Batch test using a liquid to solid ratio of 2 l/kg dry matter
September 1, 2019 - ISO

This document specifies a test providing information on leaching of soil and soil-like materials under the experimental conditions specified hereafter, and particularly at a liquid to solid ratio of 2 l/kg dry matter. The document has been developed to measure the release of inorganic and organic...

ISO 21268-2 - Soil quality — Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials — Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter
September 1, 2019 - ISO

This document specifies a test providing information on leaching of soil and soil materials under the experimental conditions specified hereafter, and particularly at a liquid to solid ratio of 10 l/kg dry matter. The document has been developed to measure the release of inorganic and organic...

DS/EN ISO 21268-3 - Soil quality – Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials – Part 3: Up-flow percolation test (ISO 21268-3:2019)
October 21, 2019 - DS

This document specifies a test, which is aimed at determining the leaching behaviour of inorganic and organic substances from a soil and soil-like materials. The method is a once-through up-flow percolation test under standardized conditions of flow rate. The material is leached under dynamic...

DS/ISO 21268-3 - Soil quality – Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials – Part 3: Up-flow percolation test
October 21, 2019 - DS

This document specifies a test, which is aimed at determining the leaching behaviour of inorganic and organic substances from a soil and soil-like materials. The method is a once-through up-flow percolation test under standardized conditions of flow rate. The material is leached under dynamic...

ISO 21268-3 - Soil quality — Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials — Part 3: Up-flow percolation test
September 1, 2019 - ISO

This document specifies a test, which is aimed at determining the leaching behaviour of inorganic and organic substances from a soil and soil-like materials. The method is a once-through up-flow percolation test under standardized conditions of flow rate. The material is leached under dynamic...

Advertisement