This Japanese Industrial Standard specifies the requirements for carbon steel pipes (hereafter referred to as pipes) used for the conveyance of steam, water (except public water supply service), oil, gas, air, etc. at comparatively low working pressures. This Standard is...
This Standard specifies requirements for the carbon steel pipes (hereafter referred to as pipes) used mainly for service at temperatures over 350 °C. The requirements in this Standard normally apply to pipes with an outside diameter of 10.5 mm to 660.4 mm. NOTE...
This Japanese Industrial Standard specifies the hot-rolled carbon steel strip (hereafter referred to as steel strips) used for welded steel pipes and tubes.
This specification covers carbon steel pipe for high-temperature service. These pipes are suitable for welding, bending, flanging, and similar forming operations. Mechanical testing of the specimens shall include tensile, bending, flattening, hydrostatic and nondestructive...
1.1 This specification2 covers carbon and alloy steel pipe, electric-fusion-weld
This guide covers standard specification for seamless, straight-seam welded, and cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service. Several grades of steel shall conform to the required chemical composition for...
Narrow Your Results